Carryout the Renovation works in TNCSC godown campuses at Thiruvarur, Perugavalthan, Keezhapandi, Kachanam, Alangudi and in TNCSC MRM Campuses at Sundarakottai in Thiruvarur District

Amount

CIVIL WORK

Carryout the renovation works to TNCSC godown campus at Alangudi in Valangaiman Taluk inThiruvarur District. Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed

White washing one coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Washing of plastered surface with soap, soda and water (or with soda lime, brush and water)

Carryout the Renovation works to TNCSC godown campus at Keelapandi Village in Thiruthuraipoondi Taluk in Thiruvarur District. Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Roof slab, beam, lintel, bed block, landing slab, tie beam etc.,

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality Country Bricks of size 8 3/4”x4 1/4 x2 1/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In foundation and basement

Supplying fabricating and fixing ISI structural steel materials for truss, purlin, stanchion post including cutting drilling holes and welding including painting two coats of good quality I class synthetic enamel paint over one coat of oxide primer etc. complete (If the required structural steel members supplied at site by the Corporation the cost will be recovered at the issue rate) as directed by Corporation officers.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing one coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

PLASTERING with cement mortor 1:3 (one cement and three sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Servicing the rolling shutter of size 1.80 x 2.60m in condition including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Through scrapping of old plasterd walls surface.

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3x1 and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Carryout the Renovation works to TNCSC godown campus at Kachanam Village in Thiruthuraipoondi Taluk in Thiruvarur District. Supplying and fixing AC ridges with 6mm thick of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing one coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the rolling shutter of size 1.80 x 2.60m in condition including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3x1 and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Washing of plastered surface with soap, soda and water (or with soda lime, brush and water)

Carryout the Renovation works in TNCSC godown campus at Perugavazhnthan Village in Mannargudi Taluk in Thiruvarur District Dismantling plain cement concrete and clearing away as directed by the departmental officers

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Cement Concrete 1:5:10(one cement, five sand and ten aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing of Bitumen felt of 15mm thick and 150mm width fixing of M20 concrete surface including all charges etc., complete

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

White washing one coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Servicing the rolling shutter of size 1.80 x 2.60m in condition including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3x1 and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Thorough scrapping of old plastered walls surface as directed by the departmental officers

Carryout the Renovation works in TNCSC godown campus at Thiruvarur in Thiruvarur District Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. clearing, levelling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specificationand as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Cement Concrete 1:5:10(one cement, five sand and ten aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column footing, and Plinth beam , top tie beam etc.,

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

BRICK WORK in cement mortar 1:5(One cement ,Five sand)using best quality Country Bricks of size 8 ¾ x4 ¼ x2¼’’ for walls including cost of scaffolding curing ,finishing etc., complete complying with standard specifications and as directed. In Foundation & Basement.

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long etc. Complete

PLASTERING with cement mortor 1:3 (one cement and three sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

White washing one coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Servicing the rolling shutter of size 1.80 x 2.60m in condition including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing of 110mm dia PVC rain water down fall pipes of including cost of PVC specials fixing them in position with necessary shoes, bends, clamps, TW plugs, screws, nails etc., complete. As per standard specifications

Dismantling A.C sheet roofing without roof timber and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Dismantling brick work in cement mortar wall under 3 M heigh for any thickness of wall and clearing away as directed by departmental officers.

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitutinol direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading unloading and cutting etc., complete for 42m length

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Through scrapping of old plastered surface.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3x1 and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Carryout the Renovation works in TNCSC godown campus at Sundarakottai in Mannargudi Taluk in Thiruvarur District. Dismantling A.C sheet roofing without roof timber and clearing away as directed by the departmental officers.

Dismantling brick work in cement mortar wall under 3M high and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Dismantling reinforced cement concrete and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Thorough scrapping of old plastered walls surface as directed by the departmental officers.

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. clearing, levelling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specificationand as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Cement Concrete 1:5:10(one cement, five sand and ten aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete RCC wall .

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Plain Cement Concrete 1:2:4(one cement two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long etc. Complete

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitutinol direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading unloading and cutting etc., complete for 42m length

BRICK WORK in cement mortar 1:5(One cement ,Five sand)using best quality Country Bricks of size 8 ¾ x4 ¼ x2¼’’ for walls including cost of scaffolding curing ,finishing etc., complete complying with standard specifications and as directed. In Foundation & Basement.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

White washing one coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Servicing the rolling shutter of size 1.80 x 2.60m in condition including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Supplying and fixing steel weld mesh for Air inlet window frame using 25x6mm frame stiffener flat at not exceeding 0.60m centre in both direction and using 3”x1” and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

Supplying and fixing steel weld mesh for steel ventilator frame using 25x6mm frame stiffener flat at 1.20 x 0.60 size of ventilator and using 3x1 and 6 x 10G weld mesh including labour charges, welding charges, conveyance to the site fixing in position by dismantling masonry / RCC works if necessary and making good of them and including one coat of oxide primer etc. complete.

HariRam Constructions