REPAIR TO BARBED WIRE CHAIN LINK FENCING AND ALLIED WORKS UNDER AGE BR II AT DIPATOLI

Amount

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground posts embedded in concrete, brickwork masonary etc complete all as specified and as directed.

Demolition of brick/stone masonry built in cement mortar complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

S&F in repair galvanized 2 strands steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed. Note:- Each line of wire shall be measured.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and sub base filling and mass concrete complete all as specified and as directed.

M&L for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in foundation filling and packing of fencing post or other works complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

M&L for mild steel round bars 10mm dia and over, as in chain link fencing cut to length, bent to shape required, including, cranking, bending, spirally for hooping ends and binding with mild steel wire (annealed) not leas than 0.9 mm dia or securing with clips quality confirming to Fe 410-S or Fe-410-0 complete all as specified and as directed.

S&F flat iron for using in fencing including cut to shape, drilled and counter sunk for screw bolt, including bending and welding as necessary gusset plates riveting etc, and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.

S&F mild steel angle iron as in fencing any type including cutting tops to shape as directed, drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde 165 complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed.

Delhi Enterprises