Upgradation and Renovation, Face Uplift, Internal Re-arrangement, Waterproofing, Plumbing Work for Existing TPC cum Guest House-of MPA

Amount

CIVIL WORKS

Breaking & Removing the old cement concrete or any type of tiled flooring including , cleaning the site, stacking the same debris or spreading the debris as directed

Dismantling brick masonry and stacking the materials as directed with all leads, lifts etc. complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Dismentaling & removal of Existing False Ceiling

Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 mm. manually including loading of dismantled material to transport vehicle at site excluding lead charges

Removing Wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.

Removing of existing Doors with door frame, windows , mild steel grill, railing, Ventilators, shaft door, false ceiling, partitions , etc as per Direction Engineer incharge and proposed Drawings, item includes lowering down debris at designated marked place which is surrounding covered with green hassian cloth , re usable scrap items to be kept at one place as per instructions engineer in charge.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Carting away of debris from work premises to dumping area with tractor trolley as directed by engineer in charge .(Vehicle)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.compl

Providing and laying membrane water proofing coating of crystaline behaviour like “ZUPA-AQUATHON” or equivalent to top of R.C.C. Slabs of existing terrace all as per specifications of manufacturers and instruction of the Consultant complete.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and etc. complete.

Providing and laying Castinsitu/Ready Mix cement concretein M15 of trap/granite/quartzite/gneissmetalforbedblocks,foundationblocksandsuchotheritemsincludingbailingoutwater,Steelcentering,formwork,laying/pumping,compacting,rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombedsurfaceandcuringetc.complete.TheCementMortar1:3plasterisconsideredforrenderingunevenandhoneycombedsurfaceonly.Newlylaidconcreteshallbecoveredbygunnybag,plastic,tarpaulinetc.(Woodencenteringwillnotbeallowed.),withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfine aggregate (Crushed sand VSI Grade)

ProvidingAutoclavedAeratedConcreteBlockmasonaryofconformingtoIS:2185(Part3)-1984inextrafinejointingmortaroffixoblockofUltraTechorequivalentinsuperstructureincludingstrikingjoints,rakingoutjointsandscaffoldingetc.Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing and applying a suitable bond coat of specified and suitable Polymer Compound wherever necessary and as instructed by the Consultant using appropriate combination of "POLYALK-EP" of M/s.Sunanda Chemicals or "VERSABOND'" of M/s. Zupa Chemicals or other approved equivalent, all as per detailed specifications of manufacturers, including Providing and applying Polymer Mortar of required thickness (not exceeding 25mm for one layer) for spot repair of isolated or small spalled areas of R.C.C. Members using approved clean quartz sand and Polymer compounds including necessary bond coats between layers for multilayer application as per detailed specifications of manufacturers and instructions of the Consultant. (Payment will made for actual quantity in kgs. of only Polymer Combinations used, quartz sand being NOT measured separately for payment.)

Providing and laying Micro Concrete of polycrete of " SUNANDA Chemicals" to RCC beams,columns ,Pardies ,and other RCC members.Applying rusticide to exposed steel and bond coat of SUNANDA EP toexposed RCC Using 12.5% water by weight and adequate mixing as per manufacturer's specification ,poring , compacting , and curing, including required skilled / unskilled labour ,scaffolding ,tools and equipments complete.as instructed by Consultant.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and installing crystalline waterproofing treatment to inside surfaces of the water retaining structures

Structural Audit of building from certified structural consultant for building demolition and proposed structrual changes.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 10 metres lead.Contractor to use support props for beam and surround area before starting any breaking activities

FLOORING, TILES , DADO

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

P&F Ceramic Tiles DADO 600 x 300 : Providing and fixing Ceramic Tiles for dado 30 x 60 cm of about 10 mm thick having water absorption less than 0.055 of approved make, shade and pattern for dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete

Providing and laying Rectified and vitrified mirror finish decorative type tiles for 100 mm High Skirting of approved make, shade and pattern for Skirting in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.)

Providing double sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, removing existing cills stacking the same and debris disposing off upto a distance of 50 metres, removing, refurbishing & refixing existing alu. grill, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete.

P&F Single patti door frame in Granite :Providing single sills (100-200mm wide), jambs and frames of black/approved colour Granite slabs of mininmum 15-18mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete.

Providing and constructing 600mm wide Granite platform for toilet,wash basin counter as per Architects details. Vertical and Horizontal supports of kadappa stone with granite top and 75mm granite fascia as per architect detailed drawing and design including making provision for and fixing wash hand basin etc. complete with finishing/moulding & polishing .

Providing and preparing kitchen Platform upto 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1m.c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

EXTERIOR WORK

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks for outdoor landscape, of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.

Providing and Fixing Structural Glazing : Designing, providing, fabricating and installing Structural glazing system (inclusive of vision, spandrel and openable panels) with back structure framing arrangement, as per approved design (based on concept architectural elevation drawings), Anodised Aluminium members like muliions, etc. in approved shade, including required stainless steel fitting and fixtures, required hot dip galvanised / non ferrous metal.anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent pproved), required fire stop, sheaves. Work to include preparing and finishing of junctions with concrete, masonry, aluminium including use of flashing if any as approved by the Engineer in charge etc. all complete.( all fittings of dorma or equivalent and Glass of Saint Gobain or equivalent) Rate includes removing existing shutters stacking the same as directed by engineer incharge.

Planter Box Supply and fixing of heavy duty thick coloured Fibre indoor planters for keeping indoor earthen pots of 8 inch dia with bevelled top edge.

Raising of scafolding to reach the entire surface area of bridge or Building .up to 10 m height above ground level, made with MStube ,horizontal and vertical tub joint with cup and lock system with MS tubes, challies,MS clamp and maintaing it in a serveciabl econdition for execution work of cleaning and/or pointing and or/applying protection coating and/ inspection of work at required locations and removing it there after etc complete .(Item includes making of temporary support for scaffolding, cost of scaffolding, labour, material, safety devices,etc.,all complete)

PAINTING WORK

P&A Interior Plastic Emulsion Paint : Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in two coates including scaffolding, preparing the surfaces etc. complete. (including primer coat).(Dulux, Asian or equivalent)

P&A Interior Luster Paint : Providing and applying interior wall finish luster of Asian /Berger/ Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Dulex Paints or quivalent wall primer with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a Period 6 to 8 hours. Scrapping with Emergy paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emergy paper 320 and wipe clean. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21 % after 8 hours of activity and applying 2nd coat with of Asian / Berger / Nerolac / Dulex Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9% with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (Excluding Scaffolding)

Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

POP & GYPSUM WORK

Providing and fixing in position Moisure Resistant Gypsum board ( MR Board of Saint Gobain or USG Make ) false ceiling with 12.5 mm thick Gypsum boards, screwed /fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediatechannels.Additionalintermediatechannelsshouldbefixedtostraphangersforadditionalsupporttopreventstrappingatevery1200milimetreitemtobecompletedinallrespectincludingnecessarysleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular) Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of99% ,NRC0.5, Light Reflectance 85% ,Thermal Conductivity k=0.052-0.057 w/m K, Colour White ,Fire Performance UK Class 0/ Class 1 (BS476pt-6&7) inmodule size of 600x600x16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and XL2CLI Ponall Tsectionsi .e.the Main Runner,1200mm and 600mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.57 Kilograms / M2 and pull out stength of minimum 100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10year warranty .approved as per GRIHA and BS476 etc.complete.

Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete

P/ Fixing Gyprock-Saint Gobain/ Hilux or eq., Single Layer Partition with 15mm Fireline with 70mm Gypsteel Ultra C Stud ( 610mm c/c ) of total thickness upto 100 mm for fire rating of 120 min. Gypsteel Ultra™ stud partition which includes one layer of tapered edge 15mm thick Gyproc™ Fireline (conforming to IS:2095 – 1996-Part-I) is screw fixed with drywall screws of 25mm at 300mm centres to either side of 70mm Gypsteel Ultra™ C stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of GI Steel) placed at 610mm centre to centre in 72mm Gypsteel Ultra™ floor and ceiling channel (0.5mm thick have equal flanges of 32mm made of GI steel), which is anchored to the floor & true ceiling using suitable anchor fasteners. The boards are to be fixed to the framework with joints staggered to avoid leakage through joints. 72mm Gypsteel Ultra™ floor and ceiling channel (0.5mm thick have equal flanges of 32mm has to be provided at the horizontal joints of the outer layer of boa rds screw fixed to the studs using metal to metal flat head screws. The boards are to be fixed to the framework with joints staggered to avoid leakage through joints.Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Jointing compound, Joint Paper tape and two coats of Drywall Top Coat (as per recommended practices of Saint- Gobain Gyproc India). The junction of the partition with masonry& all penetration through the partition has to be treated with a intumescent fire sealant of equivalent fire rating. The cavity of the partition should be filled with ceramic wool / glasswool / rockwool of 50mm thick & of minimum 48 kg/Cum desity.etc all complete.

CARPENTRY WORK

Full Height Singel Glazed staight Partition partition in segmented glass Supply & Installation of Modular Aluminium Single glazed partitioning frame of 45mm System,Using KOPS 001 (45mm x 25mm) as wall starter and top section,Using KOPS 002 (45mm x25mm) as bottom channel.Using glass to glass butt joint with I, L joint Partition 10mm thk. clear thoughen glass partition.

Palmate Boxing Cover For Roller Blind : Providing and fixing 760mm deep & 150-200 mm wide palmate made of 19mm thick plywood and finished with Gypsum Board externally & internally. Intermidiate supports at every 1200mm made up of 19mm thick plywood and finished with 0.8mm laminate. The exposed edges of the shelves to be covered with teak wood lipping finished with melamine polish. All complete including necessary hardwares,etc complete. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming toI.IS. 303)

Trap Door : Providing and fixing Trap door's frames and Trap door Shutter by Wood and Commercial ply in layers to make up and over the frames and finishing them with laminates, beading patting, Hinges, Locks, screw with all complete hardware fixtures as well as fitting and as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Copper Colour Mirror with Panelling : Providing and fixing Copper Colour Tint Mirror panelling with framework 12 mm thick plywood finished with 8mm thk tint grey colour mirror fixed as per Architect's Drawings. (Plywood of the generally confirming toI.S. 710)

P&F Veneer Panelling : Providing and fixing on site veneered paneling 4 mm. thick with 12 mm. thick Commercial ply on basic partition of the requisite manufacturer viz anchor /Century / Kenwood / Duro or equivalent generally confirming to I.S. 303 finished with necessary grooves antitermite treatment to plywood and on back side of veneer with melamine polishing etc. including all leads and lifts etc. complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sq.M..

Providing and fixing 1st quality Burma T.W. door frame of size 75 x 150mm with required groove and chamfer including M.S.hold-fast of size and make. as per architect's detailed drg. And design and as instructed by the Engineer-in-charge.

P&F plywood storage box for electrical Distribution Box

Reception Table : Providing and fixing in place, table of size 2375 x 650mm (worktop size)comprising of 25mm thick table top made of particle board with Ledge of size 2375mm x 350mm x 1250mm High having sliding shutters with locks and a drawer pedestal of size 400mm x 500mm consisting of 2nos. drawer of 100mm deep and 300mm deep filing drawer having common lock including modesty apron to be made out of 19mm thick commercial plywood/particle board. The table top to have post form edge. All complete including key board drawer, CPU trolley and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8mm thick laminate of approved shade. all complete as directed. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming toI.S. 303)

MD Table : Providing and fixing in place, table of size 2300 x 900mm (worktop size)comprising of 25mm thick table top made of particle board with Ledge directed by engineer incharge..

Providing & Fixing Laminated Flooring: Providing and laying at site 9mm thick laminated flooring having an in built 1mm sound block

DOORS & WINDOW

Providing & Fixing Door Shutters in Both side Laminate finish : with Complete Hardware at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 -termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Supply & Installation of Aluminium Door Frames 100mm x 30/45mm of size 1000 x 2100

Supply & Installation of Aluminium Glass Door shutter with Hardware Fitting. Size:- 900mmx2100mm.

Aluminium Sliding Windows : Removing, Repairing & Refixing of Aluminium Sliding Window with all complete hardware fixtures.

MESCULANIOUS WORK

Roller Blind Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent)

Digital print Providing and pasting of Vinyl glass film on to the existing ready to paste Wall as directed by the Architects. The shade/ Graphic and make of the film shall be approved by the Architects. Basic Rate Of Film Rs. 180/- per sft. Rate Including Printing.

Providing & Fixing frosted film manufactured by "3 M " on glass partition wherever required as per the instruction of Architect.

Executive chair W560xD600xH1200mm Providing & supplying Executive chair finished with PU leather, Wooden armrest, head rest with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Staff's chair W560xD560xH900mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm gas lift, Adjustable seat height and tilt tension, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Visitor's chair W560xD560xH1000mm Providing & supplying visitor chair finished with leather mesh fabric, Fixed PP armrest, with Metal frame, seat filled with foam, with nylon buffers. Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Providing & Fixing Cafe Chair Basic Rate of Chair Rs. 3000

Providing & suppling of Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing & suppling of 3 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Centre table : Providing & supplying square shape centre table, made of SS metal or TW frame, 10mm thk clear glass with half round edge moulding, with nylon buffers etc complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & supplying of Side Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top.Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 500 Dia. x 500 mm ht.

White Borad : Providing & fixing white board with Polyester white board film, Pressure-sensitiveacrylic, Permanent Adhesive, Silicone-coated poly paper etc complete as approved by the Engineer in charge etc. all complete. (3M film or equivalent)

Carpet tiles floor : Providing & fixing Carpet tiles made up of Face yarn must be 100% nylon fiber. Loop Pile shall be 100% Bulk Continuous Filament (BCF); cut and loop shall be 100% BCF for the loop portion and may be BCF or staple for the cut portion; cut pile carpet shall be staple or BCF. Static: Less than or equal to 3.5 kV fixed with ready made adhesive (ISI mark quality) including cleaning surface before laying, leveling the surface etc complete as approved by the Engineer in charge etc. all complete. (Millicane or equivalent)

Providing and fixing imported quality wall paper of 0.8 mm. thick of approved quality and design made up of poly venyl coating with fabric backing five resistant wipe cleaning strain resistant and having height of 390 Gram/Sq.M.. etc. and as directed by Engineer-in-charge Basic Rate 350/- Sft

Brass -Prototyping supply installation & commissioning single side nameplate Signages shall be made of 25mm thick pi shape extruded 6063 -T6 aluminium profile of 2mm wall thickness.two 3 mm internal ribs shall be provided for corner locking the profile shall Gold/ Sliver/ Black anodised 15micron dept.The display shall be 3mm thick aluminium sheet with PU Coated in black colour with aproved text in 4mm Brass cutout laser cut letter with gold plating & lacqur coating fittted on aluminium plate.The signage shall be provided wih trarded S.S.Stud welded at the backside of the wall mounting Rate Inclusive of Base plate & Hindi English Letters as Design & Directed by Architect

Wall Potraits 300 x 300 mm approved make & as directed by Engineer In-Charge High resolution 3D printed picture ( from stock) painted on fabric of choice stretched on PVC frame of thickness 1.5 inch all around of aproved colour , hung as required.

Wall Potraits 600 x 600 mm approved make & as directed by Engineer In-Charge High resolution 3D printed picture ( from stock) painted on fabric of choice stretched on PVC frame of thickness 1.5 inch all around of aproved colour , hung as required.

Wall Potraits 1200 x 1200 mm approved make & as directed by Engineer In-Charge High resolution 3D printed picture ( from stock) painted on fabric of choice stretched on PVC frame of thickness 1.5 inch all around of aproved colour , hung as required.

Pest control : Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313(Part-Ill) by purching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by fillingputty etc. complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5mm angle sections fitted with sliding bolts and handles for both sides, deep M.S. Channels section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S. Bracket Plate 300 x 300 x 3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete (IS 62481979 ) (With Mechanical gear)

Providing and fixing 8 to 10 mm thick back painted Toughened Glass for Wall panelling as per design and site requirment , as per Direction by Engineer In-Charge

Providing & Fixing of Main Logo -Dia - 30"

Providing & Fixing of Logo -Dia - 20"

Artistic Mural : Providing & Fixing Artistic Murals made of Fibberglass finish with Duco paint as Directed & Aproved By Architect.

Providing & Fixing Artificial Green Grass / turf of 25 mm thickness for horizontal and Vertical Surface - Basic Rate 200/- Sft,

The Successor's Board should be flush wall mounted type, made of Bronze colour anodised hollow Aluminium Extruded Profiles having 35±1.0 mm thickness & 1.7 mm wall thickness with R30.The overall height of the inverted "U" shaped Aluminium one piece frame without joint should be 953±1.0 mm to 1790±1.0 mm, width of 610±1.0 mm to 1220±1.0 mm max., The outer radius of the top semi circle will be R305±1.0 mm to R610±1.0 mm. The corner brackets for joining the bottom horizontal arm to the frame should be made of unbreakable Nylon 66. These brackets should have two 3mm thick internal ribs to impart additional strength. Two sturdy 1.2mm thick powder coated brackets with key hole suitable for Ø 5mm are provided at the rear for flush wall mounting.The logo of the organisation should be latex eco friendly printed on vinyl stickers and the text matter computerized cut out vinyl of Ivory colour and pasted on the semi circular Bronze colour anodised Aluminium sheet 2 mm thick and to be protected by a 2mm thick clear acrylic sheet.Individual name plates should be 1.3 mm thick and 9.35 mm collar, having length wise profile suitable for interchanging size 38.1mm interlocking with “I” sleeve extrusion of 9mm. The width of name plate should be maintained to accommodate vinyl name stickers having letter height suitable to be clearly legible from a distance of 10 mtrs.All the names / characters on the name plate to be protected by a 2mm thick clear acrylic strip.All anodised components should have coating thickness not less than 15µm.The complete assembly should be such that any intermediate name plate can be easily replaced / interchanged without completely dismantling the board.

Providing & Fixing of World Map as per Directed By Architect.

Supply of Stainless Steel Dustbin

PLUMBING WORK

Internal Water Supply System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

External Water Supply System

Providing & Fixing of UPVC ASTM Pipe SCH -80 For External Water Supply and Irrigation System.

Providing & Fixing UPVC SCH-80 20mm Dia

Providing & Fixing UPVC SCH-80 25mm Dia

Providing & Fixing UPVC SCH-80 32mm Dia

Providing & Fixing UPVC SCH-80 40mm Dia

Providing & Fixing UPVC SCH-80 50mm Dia

Providing & Fixing UPVC SCH-80 65mm Dia

Providing & Fixing of Brass Ball Valve For Water Supply and Irrigation System

Brass Ball Valve 32mm Dia

Brass Ball Valve 40mm Dia

Brass Ball Valve 50mm Dia

External Drain System

P&F PVC Pipe 75mm Dia : Providing and fixing 75 mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete.Spec. No.: As directed by Engineer in charge.

P&F PVC Pipe 110mm Dia : roviding and fixing 110 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete P&F Vitrified Tiles flooring (Italian effect) : Providing and fixing decorative Italian marble effect tiles of size 600 x 300 mm of about 5 to 6 mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete directed by Engineer in charge.

P&F Wash Basin : Providing and fixing "Hindware" or equivalent make Wash Hand Basin of Italian pattern and style of Olivia or similar series or fonte series, having star white as per Architecual drawing and directed by the Engineer-in charge etc. complete.

P&F Water Closet : Providing and fixing wall mounted European water closet of Hindware make of "WAVE" or similar series or similar approved by Engineer In charge. With cover with 'P' trap distance of 25.5cms. Having certification of Green Building product of star white colour with arrangement of inlet and outlet to the W/c pan and fixing PVC heavy duty dual center flush operated flush tank of plumbing and sanitary fittings as per Architecual drawing and directed by Engineer in Charge etc. Complete

P&F Pillar Basin Mixer : Providing and fixing PILLER BASIN MIXER of push tap/ Hands free with sensor of approved Roca make or equivalent make including necessary socket/union etc. complete as directed.

P&F 2 IN 1 BIB COCK : Providing and fixing 2 IN 1 BIB COCK of Push tap/ Hands free with sensor of approved Roca make or equivalent make including necessary socket/union etc. complete as directed.

P&F Health Faucet : Providing and fixing health faucet jet spray of approved Jaguar or equivalent make including necessary socket/union etc. complete as directed.

P&F Angle Cock : Providing and fixing Angle Cock of approved jaguar or equivalent make including necessary socket / union nut etc. complete.(JAGUAR code: SOI-6047)

P&F Concealed Stop Cock : Supply fixing and installation of Concealed stop cocks of approved Jaquar make or equivalent (to be provided only at the entry point of plumbing lines within the toilets / pantry)

Bottle Trap : P/F Bottle trap for wash basin

P&F Towel ring : Providing and fixing Towel ring round flange of approved jaguar or equivalent make etc. complete.

P&F Soap Dispenser : Providing and fixing Soap Dispenser with glass bottle of approved jaguar or equivalent make etc. Complete

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use

Urinals : Providing and fixing white glazed wall mounted earthenware semi stall type urinals (of IS Std.) without cistern, with inlet pipes chrome finished push valve type tap, UUPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, chromium plated bottle trap, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Make - Roca or equivalent.

SS Kitchen Sink : Providing and fixing stainless steel kitchen sink (600 x 450 x 250 mm deep approx size) with or without Drainboard of Nirali, Hindustanmake or any other equivalent approved make with stopcock, pillar cock, waste couplings, CP bottle trap, rubber plug and CP brass chain CI brackets, drainage connection water supply with drain board and plumbing installations up to external wall etc complete as directed and instructed by Engineer incharge

Providing and fixing 75mm PVC nahani trap with grating etc. complete.

C.P.sink mixer Supply of Sink Mixer - Jaquar note:- J shape spout with wall flange of heavy duty Jaquqr make (Wall mounted). (Sink cock with J shape spout Cat. No. FLR-5309N OR consider equivalent make)

MODULER FURNITURE

Manager Table with Side Storage Unit - Table Size - 1500L x 750 W x 750 H in mm Side Unit - 1000 x 450 D x 750 Ht

Manager Table - Tops - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Metal understructure ( ECO - C TYPE ) - made with MS Crca 1.6mm Tubes with Powder coating. Vertical member will be made from 50x50 Square tube and 2 vertical horizontal member will be made from 40x40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top. Side Storage Unit - 2 Drawers & 2 Openable Shutters Tops - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding. Side Legs , Shutters ,Shelf , Bottom - 18mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding. Back - 9mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding. MATERIAL - PLY WITH LAMINATE FINISH

60mm thk Low Ht modular Partition = 1200mm Ht

Size = 60mm thk X 1200 Ht

Staff Linear Workstation - Non - Sharing Type

Non - Sharing Linear Workstation Size - 1500 L x 750 W x 750 H in mm - ECO series

Tops - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Metal understructure ( ECO - C TYPE ) - made with MS Crca 1.6mm Tubes with Powder coating. Vertical member will be made from 50x50 Square tube and 2 vertical horizontal member will be made from 40x40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top. 60mm thk partition on wall side - made out of Aluminium Powder coated sections , trims with soft board & White board combination. Size - 60mm Thk x 1200 mm Ht

3 Drawer Pedestal - 400 L x 450 W x 710 H in mm

3 Drawer pedestal. 2 Box and 1 File drawer. Complete pedestal in 18mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Internal drawer in meta box. Central locking system. MATERIAL - PLY WITH LAMINATE FINISH

Medium Ht Storage Unit with Planter - with Openable shutters only

Size = 400 Depth X 1050 Ht Storage + 150mm Ht Planter

Storage top: 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding.

Side , Shelves & openable shutters - 18mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding.

Hardware - Levelling bolts , minifixes , Regular auto close hinges , Multipurpose lock etc complete.

Pantry Platform Size - 680 D x 800 Ht

Pantry Platform - made up of 18mm Thk ply with 19mm thk Granite on top with white balancing laminate below top.

Under structure: In ply with laminate finish.

(SS Baskets & other accessories are not included in the rate)

Material - Ply with Granite on top & laminate below

Overhead unit in Pantry - 400 D x 800 Ht

Overhead Cabinet - made out of 1 18mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding.

Hardware - Minifixes , Regular auto close hinges , Multipurpose lock etc complete.

V P Table with Side Storage Unit - Table Size - 1800L x 750 W x 750 H in mm Side Unit - 900 x 450 D x 750 Ht

Manager Table - Tops - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Metal understructure ( ECO - C TYPE ) - made with MS Crca 1.6mm Tubes with Powder coating. Vertical member will be made from 50x50 Square tube and 2 vertical horizontal member will be made from 40x40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top. Side Storage Unit - 2 Drawers & 2 Openable Shutters Tops - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding. Side Legs , Shutters ,Shelf , Bottom - 18mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding. Back - 9mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate on unexposed surface with PVC edge banding. MATERIAL - PLY WITH LAMINATE FINISH

E A Cubicle - Non Sharing workstation Curvelinear workstation Size - 1400 L x 1500 L x 600 W x 750 H in mm

Workstation Top - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Metal understructure ( ECO - C TYPE ) - made with MS Crca 1.6mm Tubes with Powder coating. Vertical member will be made from 50x50 Square tube and 2 vertical horizontal member will be made from 40x40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top 60mm thk partition on wall side - made out of Aluminium Powder coated sections , trims with soft board & White board combination. Size - 60mm Thk x 1200 mm Ht

Conference Table -

14 PAX - 5000 X 1200 D X 750 HT ( 2 pop up box)

Table top: made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding.

Metal understructure ( ECO - C TYPE ) - made with MS Crca 1.6mm Tubes with Powder coating. Vertical member will be made from 44.5 Dia Round Tube and 2 vertical will be connected with horizontal member made from 25x50 Rectangle tube. Vertical and Horizontal member will be connected using Alumnium Die Cast Connector. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top. Modesty Panel - made of 18mm thk prelaminated particle board with PVC edge banding.

WIRE MANAGEMENT: Continuous single-tier raceway finish in Powder coating with the provision of the electrical leg at an intermediate distance to take out cable from floor to raceway.

Table outside VIP Cabin 2 -

Table Size - (1280 + 600) L x 600 W x 750 H in mm

Tops - made of 25mm thk ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Metal understructure ( ECO - C TYPE ) - made with MS Crca 1.6mm Tubes with Powder coating. Vertical member will be made from 50x50 Square tube and 2 vertical horizontal member will be made from 40x40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top.

3 Drawer Pedestal - 400 L x 450 W x 710 H in mm

3 Drawer pedestal. 2 Box and 1 File drawer. Complete pedestal in 18mm thk. ply with 1mm thk laminate on exposed faces and 0.8mm thk balancing laminate below top surface with PVC edge banding. Internal drawer in meta box. Central locking system. MATERIAL - PLY WITH LAMINATE FINISH

HVAC SYSTEM

Supply of split type air conditioning units,each comprising of an outdoor and indoor unit/s.Condensing units complete with Scroll/Reciprocating/Rotary Compressor/s, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins etc.

Hi-Wall Split AC - 3 Star Inverter

1.0 TR - 3 star Inverter

1.5 TR - 3 star Inverter

2.0 TR - 3 star Inverter

Installation of indoor & Outdoor units

Hi-Wall Split AC - 3 Star Inverter

1.0 TR - 3 star Inverter

1.5 TR - 3 star Inverter

2.0 TR - 3 star Inverter

Refrigerant Copper Piping

Supply, Installation of copper refrigerant piping with insulation, Including supports for copper pipes.

Supply and installation of cabling for Indoor to outdoor unit with accessories

For Hi-Wall Split AC

Power Cable For Indoor unit inculding pintop ( Socket To Indoor Unit 2 mtr)

Supply & Installation of Outdoor Units Stand

Readymade stand for Outdoor units with Supports.

Supply, Installation & Testing of Insulated Hard PVC drain Piping with 9 mm Tubular Insulation with supporting clamps.

25mm Dia

32mm Dia

Supply & Installation of Drain pump for Hi-wall units

Lifting, Shifting charges

NETWORKING WORK

4-pair Cat6 UTP PVC Cable, roll of 305m,Gray

Cat 6 RJ-45 Information Outlet- Data

Cat 6 RJ-45 Information Outlet-Redundant

Cat 6 RJ-45 Information Outlet-Voice

Cat 6 Patch cord - 2 Mtr - Data

2-port Shuttered faceplate, WHITE

4-port Shuttered faceplate, WHITE

Rack Side

24-port unloaded Straight Jack Panel 1U

Cat 6 RJ-45 Information Outlet- Data

Cat 6 RJ-45 Information Outlet-Redundant

Cat 6 RJ-45 Information Outlet-Voice

Cat 6 Patch cord - 2 Mtr - Data

15U 600X550 MM Wall Mount Rack With Acessories (Network Rack)

SWITCHES

Aruba Instant On 1930 24G 4SFP/SFP+ Switch JL682A

Aruba Instant On 1930 24-Port Gb Ethernet 24xGE PoE (195W), 4X 1G/10G SFP+, L2+ Smart Switch JL683A

ACCESS POINT

Aruba Instant On AP12 (RW) Access Point

ELECTRICAL WORK

Main LT panel

Deisgning, Supplying, Transporting to project site, Installing the Main Panel on a suitable MS fabricated stand 300mm above the floor level in approved manner, fixing of all the switchgear, controlgear and instrumentation using all the accessoires, proper termination, wiring with suitable size lugs, testing and successful commisioning. The components and the protection type are as below as per SLD- 1. IP43, 16SWG - Overall, 14SWG - Gland plates, Top entry 2. Powder coated - RAL7310 3. Base frame - 100mm C channel 4. Incomer - ATS - __A 5. Outgoing - Lighting, AC, PDB, Utility with Timer and Contactors and APFC feeders 6. SPD for the Main Incomer and AC Feeder 7. Please refer the SLD

DISTRIBUTION BOARDS

Supply, installation, testing, tagging, (Circuit numbering) and commissioning of following IP43,double door readymade recessed type MCB, DB, fabricated out of CRCA sheet and painted with powdercoating process OR made out of scratch proof polycarbonate body, and concealed in wall or on surface with necessary frame complete as required.

Main LP DB (GF and FF)

6way , VTPN MCCB Double Door DB

Incoming :-

1. 100A FP MCB, 25KA : 1Nos

Outgoing :-

1. 40/63A TP MCB, 10KA : 2Nos.

2. 32A TP MCB, 10KA : 2Nos.

3. 25A SP MCB, 10KA : 6Nos.

LIGHTING AND POWER DISTRIBUTION BOARD (LDB)

6way , TPN MCB Double Door DB

Incomer :-

32A TPN MCB, 10KA : 1Nos

25A/30mA DP RCCB : 3Nos

Outgoing :-

6/32A SP MCB, 10KA : 12Nos.

UPS AND ELDB DISTRIBUTION BOARD (UDB)

6way , TPN MCB Double Door DB

Incomer :-

32A TPN MCB, 10KA : 1Nos

25A/30mA DP RCCB : 3Nos

Outgoing :-

6/32A SP MCB, 10KA : 12Nos.

MAIN UPS I/P SUPPLY DB (MU I/P and O/P DB)

8way , SPN MCB Double Door DB

1. I/P 63A TPN MCB

2. O/P 63A TPN MCB

HVAC Encluser Box for near Outdoor unit

1. 63A TPN ELMCB with IP65 box.

SITC of UPS ON LINE 10KVA Three Phase Input & Three Phase Output complete with necessary protections,LCD DIsplay, Fault Memory, RS/Ethernet Interface Compatibility, with batteries of Excide make maintenance free (30MIN Back-Up), with battery terminals wire and necessary copper wire, with plug and socket top Accessories,. Battery Stand, Isolation & Proteciton Switch for Battery Bank, Shrouds over Battery Terminals for Safety Purpose, Smart UPS with IGBT rtechnology, Input p.f. Unity.

L.T. CABLES & END TERMINATIONS

M V CABLES

Supply and laying of 1.1 KV grade PVC insulated, inner sheath PVC tapped extruded outer sheath PVC GI strip/round armoured, solid aluminium/Copper conductor power cable conforming to IS 1554 / Part –I with latest amendments fixed on wall / column slab etc.

4C X 4 sq mm Cu Armoured Cable

4C X 6 sq mm Cu Armoured Cable

4C X 10 sq mm Cu Armoured Cable

4C X 25 sq mm Cu Armoured Cable

1C X 16 sq mm Cu unarmoured Cable

1C X 6 sq mm Cu unarmoured Cable

End Joining of Cables

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated single compression brass cable glands, copper compression type cable sockets , PVC insulating tapes, etc.:

4C X 4 sq mm Cu Armoured Cable

4C X 6 sq mm Cu Armoured Cable

4C X 10 sq mm Cu Armoured Cable

4C X 25 sq mm Cu Armoured Cable

1C X 16 sq mm Cu unarmoured Cable

1C X 6 sq mm Cu unarmoured Cable

EARTHING STATIONS

SITC of Pipe in pipe Maintenance free Chemical Earthing System, Model 3 Meters, Outer Electrode dia 50 mm inner dia 25 mm,filled with highly conductive material with outer electrode coated up to 70-100 micron galvanisation with HDG and inner electrode coated upto 200-250 micron galvanisation Tightly filled with Crystalline Conductor Mixture with HDG along with 2 bags of back fill compound (BFC) 25 Kg each complete Rigid PVC Rectangular inspection chamber approximately 1'X11/2' with removable cover etc complete, test link etc complete including boring, refilling, levelling etc.

8 SWG GI wire

25 x 6mm GI Earthing Strip

300mm long, 25 x 6 Cu Earth bus with incloser box

POINT WIRING & FIXING OF POINTS

Point wiring for Light / Ceiling Fan / 5A Socket outlet / 15 A Socket outlet/ Exhaust Fan/15A Power Plugs etc. switches of modular type mounting box with with 650/1100 volts grade as per IS694-1990 ISI marked multistranded copper conductor FRLS insulate wire etc.

Primary Light Point with 2x1.50 + 1 x1.00 Sq.mm wire and 6 Amp Switch complete with all accessories etc. (for maximum length up to 6 mtrs)

Secondory or light point in group,with 2x1.50 + 1 x1.00 Sq.mm Sq.mm wire and 6 Amp Switch complete with all accessories etc.(for maximum length up to 4 mtrs)

Ceiling Fan Point with 2x1.50 + 1 x1.00 Sq.mm wire and 6 Amp Switch complete with all accessories etc. (for maximum length up to 6 mtrs)

Exhust Fan Point with 2x1.50 + 1 x1.00 Sq.mm wire and 6 Amp Switch complete with all accessories etc. (for maximum length up to 6 mtrs)

LIGHTING AND POWER CIRCUIT

2 x 4 Sq.mm + 1 x 2.5 Sq.mm E. Wire in 25mm PVC Pipe.(Split AC)

2 x 2.5 Sq.mm + 1 x 1.5 Sq.mm E. Wire in 25mm PVC Pipe. ( LDB to SB)

2 x 2.5 Sq.mm + 1 x 1.5 Sq.mm E. Wire in 25mm PVC Pipe. ( RPDB to PP)

2 x 2.5 Sq.mm + 1 x 1.5 Sq.mm E. Wire in 25mm PVC Pipe. ( UPSDB to PP)

2 x 2.5 Sq.mm + 1 x 1.5 Sq.mm E. Wire in 25mm PVC Pipe. ( HVACDB to IDU)

2 x 1.5 Sq.mm + 1 x 1.0 Sq.mm E. Wire in 25mm PVC Pipe. (Emergency SB,Primary Sec extra length)

POWER SOCKETS

Supply and fixing of Raw or UPS Power sockets shuttered, Modular type complete with modular plate, plate and switch ,mounting box or MCB's with metallic enclsoures. The switch box shall be fixed in partition works/wall/ceiling .

6 Amp Socket with 6 Amp Switch with back box & internal wiring

2 nos of 6/16A socket with 2 nos switch of 16A with back box & internal wiring

16 Amp Combined Socket with 16 Amp Switch with back box & internal wiring

SITC of 16/20A Single Phase Industrial type plug and socket with MS powder coated box and 16/20A SP MCB for Server room,Lab,Pantary etc

CABLE TRAY, RACEWAYS & JUNCTION BOXES ON FLOOR

Supply and laying of Heavy gauge factory built Raceways/Conduits on existing flooring .The raceways / conduits shall be fixed to the flooring with clamps for finished levels as per site conditions or through partitions with all accessories, etc.

100 x 40 mm Alu Raceways with all accessories.

150 x 50 mm GI perforated type cable tray with necessary mounting Suppots.

300 x 50 mm GI perforated type cable tray with necessary mounting Suppots.

150 x 15mm GI perforated type cable tray Cover

300 x 15mm GI perforated type cable tray Cover

25 mm MMS grade PVC Conduits with all accessories (or Casing Patti)

Supplying and fixing 4 way G.I. Finish, MS junction boxes with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways etc.

Junction Boxex with 2mm thick SS cover plates. Cover plates shall be champhered at all edges

PVC TRUNKING SYSTEM

Supply and installation of PVC type Trunking system of given dimensions including horizontal and vertical bends, reducers, tees, cross members, end cap and other accessories as required and duly mounted on wall / floor with supports / suspenders as requ

100 x 50 mm PVC Trunking without Partition (DB and Server Room)

LIGHT FIXTURES & FAN FITTINGS

Internal Lighting

Ceiling Racessed 9W LED Down Light fitting

2X2 Panel 36W LEDLight Fitting

1200mm Linear Suspended Light

LED Strip 5W / Meter with Driver

Surface mounted 15W LED Down Light fitting

3W LED Spot Light Fitting

12W Cylindrical Light Fitting.

LED Gate Post Lamp

LED - IP65 Suface / Pendent Mounted LED Luminaries 40 Watt

Designer Light-1. (Basic Rate-5000/-)

Designer Light-1. (Basic Rate-15000/-)

Designer Light-1. (Basic Rate-25000/-)

Labling

Labling for Switch plate and DB's

Electrical Supply (Temparary Work)

SITC of Flexibal cable, switch board,MCB and Tubelight fitting.

DISMENTALING WORKS

Removing of Existing Electrical Arm Cable,Flexible Cable Wire,Raceway,Cable tray,Sensor,DB's Etc.

FIRE ALARM SYSTEM

FIRE ALARM PANELS

Supply, installation, testing and commissioning of 2 loop analogue addressable fire alarm panel with battery backup, it is a 318-point addressable fire alarm control panel with optional Digital Alarm Communicator / Transmitter and expandable to 636 addressable points with an optional second Signaling Line Circuit. Each loop support 159 detector & 159 devices.

Supply, installation, testing and commissioning ofZXrA Active Repeater Silence Mute Reset Accept Evacuate and Test Controls For use with DX control panels only use a 24 Vdc supply For use with ZX control panels use a 24 Vdc supply and an RS485 card 165 x 254 x 50 mm H x W x D(Make.- Honeywell Morley or Equivalent)

Supply, installation, testing and commissioning of Analogue Addressable twin chamber Photoelectrical typel Type, Above False ceiling mounted Smoke Detector with Mounting base.

Supply, installation, testing and commissioning of Analogue Addressable twin chamber Photoelectrical type, Below False ceiling mounted Smoke Detector with Mounting base.

Supply, installation, testing and commissioning of Analogue Addressable Type , ceiling mounted Heat Detector with Mounting base.

Supply, installation, testing and commissioning of analogue addressable Manual Break Glass unit- including the mounting box.

Supply, installation, testing and commissioning of analogue addressable Hooter.

Supply, installation, testing and commissioning of Response Indicator.

Supply and drawing of 2C x 1.5 Sq. mm Twisted copper FRLS Armoured cable fixed on the surface of the building structure complete with termination and testing as per requirement for detectors, break glass units and hooters to the fire alarm panel as required. Cable to be directly clamp it on wall, slab etc.

Supply, installation, testing and commissioning of analogue addressable Monitor modules for Isolating shorted, dewired and loose circuits between two sucessive fault isolators with Auto reset arrangement as required.

Supply, installation, testing and commissioning of Control modules for Isolating shorted, dewired and loose circuits between two sucessive fault isolators with Auto reset arrangement as required.

Supply, installation, testing and commissioning of analogue addressable fault isolation modules for Isolating shorted, dewired and loose circuits between two sucessive fault isolators with Auto reset arrangement as required.

Fire Extinguisher

ABC 6kg extinguisher

CO2 fire extinguishers 4.5 kg

Fire Buckets Set ( 04 Buckets in one set )

Safety Signages for staircase and evacuation

CCTV WORK

Supply, installation, testing and commissioning 12U Rack wall Mounting

Supply,installation, laying and commissioning Cat 6 UTP cable ( conduit in electrical BOQ)

Providing & fixing Cat 6 IO camera & rack side ( Make-D-Link)

Providing & fixing 24 port jack panel unloaded for outdoor rack ( Make-D-Link)

Providing & fixing 10 port poe including 2 sfp port switch field side ( Make-D-Link)

Providing & fixing 6 port LIU loaded with pigtail & adapter for field side indoor switch ( Make-D-Link)

Providing & fixing LC to SC fiber patch cord for outdoor switch, field side switch & server room ( Make-D-Link)

Providing & fixing SFP Transceivers oudoor switch & building switch ( Make-D-Link)

Providing & fixing 1000Base-T Copper SFP Transceiver (PC & NVR) ( Make-D-Link)

PA SYSTEM

SITC ceiling/wall mounted 6W speaker with line matching transformer including necessary accessories Make Honeywell

Supply of Booster Amplifier for PA system with RMS output (actual) 240 W . 240W,Power reduction on backup power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,<1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable. Make BOSCH

SITC of Speaker Cable 2 core X 1.5 sqmm shielded Audio cable. Legrabd Make

Supply, Installation of 12 U rack for PA system

Table Top microphone with mounting stand.

AV SYSTEM

Providing & Fixing of 55". Make- LG, Samsung & Equivalent as per Direction by Engineer In Charge.

Providing & Fixing of 65". Make- LG, Samsung & Equivalent as per Direction by Engineer In Charge.

Supply, installation & commissing of 15 Mtrs HDMI Cable. Make - Kramer & Equivalent as per Direction by Engineer In Charge.

Supply, installation & commissing of 10 Mtrs HDMI Cable. Make - Kramer & Equivalent as per Direction by Engineer In Charge.

Supply, installation & commissing of 5 Mtrs HDMI Cable. Make - Kramer & Equivalent as per Direction by Engineer In Charge.

Supply, installation & commissing of 2 Mtrs HDMI Cable. Make - Kramer & Equivalent as per Direction by Engineer In Charge.

LIFT WORK

Upgradation of Elevator

Providing & Fixing SS Accordion Gate, Landing Sill & WEP with LCB2 and Yaskawa Drive Motor 5.2kw and below for 5 stops.

ARCHITECTURE, DESIGN & DRAWING