DAY TO DAY MAINTS OF INTERNAL ELECTRIFICATION INCLUDING GEYSERS, CEILING FANS/EXHAUST FAN AND LED TUBE LIGHT/BULK HEAD/ MIRROR LIGHT/CEILING LIGHTS/BLDG STREET LIGHT IN MD AND OTM ACCN AT AJMER MIL STN UNDER GE NASIRABAD

Amount

Taking down Ceiling/Wall/Exhaust fan of any sweep, dismantling blades for rewinding complete all as specified and directed.

Dismantling blades carefully and cutting down and removing old copper wire winding of following size and type of fan of any make and rewinding with new super enamelled copper wire of existing gauge as per old copper winding including providing insulation by varnishing (golden), cleaning, oiling, greasing etc and assemble all the parts complete and testing in E/M store yard and hanging ceiling/wall/exhaust fans connecting up complete all as specified and directed :- Note :- (i)The super enamelled winding wire shall be any one make of Devidayal / Chetak / National of appropriate gauge as directed by Engineer-in-Charge. (ii) Any unserviceable parts required for replacement shall be measured and paid separately under respective item of 'BOQ' as supply only.

All as per item No.2.00 here in before but Ceiling fan of size 1200mm sweep

All as per item No.2.00 here in before but Ceiling fan of size 1400mm sweep

All as per item No.2.00 here in before but Ceiling fan of size 1500mm sweep

All as per item No.2.00 here in before but Wall fan of size 400mm sweep

All as per item No.2.00 here in before but Wall fan of size 600mm sweep

All as per item No.2.00 here in before but Exhaust fan of size 250mm sweep

All as per item No.2.00 here in before but Exhaust fan of size 300mm sweep

All as per item No.2.00 here in before but Exhaust fan of size 380/400mm sweep

All as per item No.2.00 here in before but Exhaust fan of size 450mm sweep

Taking down carefully ceiling fan/exhaust fan of following sizes from ceiling/wall after disconnecting the electric cable including dismantling carefully all parts of ceiling fan/exhaust fan and refixing the same to old or new location after cleaning, oiling, greasing and testing and making serviceable complete all as specified & directed :- Note : Any unserviceable parts required for replacement shall be measured and paid separately under respective item of 'BOQ' as supply only.

All as per item No.3.00 here in before but Ceiling fan of size 1200mm/1400mm/1500mm sweep.

All as per item No.3.00 here in before but Exhaust fan of size 250mm/300mm/380mm/400mm /450mm sweep

Supply only against Ser item No 2.00 & 3.00 here-in-before ball bearing double Z type, both end sealed suitable for ceiling/ exhaust fans of different sizes complete all as specified and directed MAKE:- NBC/TATA/SKF

All as per item No.4.00 here in before but Ball bearing No 6201

All as per item No.4.00 here in before but Ball bearing No 6202

All as per item No.4.00 here in before but Ball bearing No 6203

All as per item No.4.00 here in before but Ball bearing No 6204

Supply only against Ser item No 2.00 & 3.00 here-in-before gun metal bush of suitable size for 1200mm/ 1400mm/ 1500mm sweep of ceiling fans complete all as specified & directed.

Supply only against Ser item No 2.00 & 3.00 here-in-before rotar shaft for following sizes of ceiling / exhaust fan complete all as specified and directed :-

All as per item No.6.00 here in before but Ceiling fan of size 1200mm/ 1400mm/ 1500mm sweep.

All as per item No.6.00 here in before but Exhaust fan of size 250/300mm sweep

All as per item No.6.00 here in before but Exhaust fan of size 380mm/400mm /450mm sweep

Supply only against Ser item No 2.00 & 3.00 here-in-before shackle assembly complete with rubber reel, brackets 3 X nuts & bolts with quarter pin suitable for fixing ceiling fan of any type sweep and make complete all as specified & directed.

Supply only against Ser item No 2.00 & 3.00 here-in-before three core copper flexible wire of size 23/0.0076 PVC insulated 1100 Volts, for ceiling fan / Exhaust fan complete all as specified and directed. Make :- Havells / Plaza / Finolex.

Supply only against Ser item No 2.00 & 3.00 here-in-before capacitor of following capacity, paper insulated with PVC/ aluminium body, ISI marked complete all as specified and directed. Make :- Havells /Bajaj / AMCAP.

All as per item No. 9.00 here in before but 2.5 Mfd

All as per item No. 9.00 here in before but 3.15 Mfd

All as per item No. 9.00 here in before but 4.00 Mfd

Taking out old unserviceable capacitor and S & F capacitor of 2.5 Mfd capacity, paper insulated with PVC/ aluminium body, ISI marked complete all as specified and directed. Make :- Havells /Bajaj / AMCAP.

Supply only against Ser item No 2.00 & 3.00 here-in-before capacitor holding clamp suitable for any type of rod complete all as specified and directed.

S & F in repair mild steel clamp made out of flat iron of size 32 x 6mm of suitable length with nuts, bolts & washer for hanging of ceiling fan (any type, sweep and make) complete all as specified and directed.

S & F in repair plastic canopy suitable for ceiling fan of 1200mm/1400mm/1500mm sweep complete all as specified and directed. NOTE:- Make match with existing provisions

S & F in repair blade made of aluminium suitable for ceiling fan of 1200mm/1400mm/1500mm sweep complete all as specified and directed. NOTE:- Make match with existing provisions

S&F in repair stepped type (switch type) electronic ceiling fan regulator, flush type, AC, 230 volts complete all as specified and directed.

S & F in repair 15mm dia down rod made out of high density mild steel, 30cm long including drilling the hole for split pin and duly painted same as existing colour of fan complete all as specified and directed.

S & F in repair 15mm dia down rod made out of high density mild steel, 45cm long including drilling the hole for split pin and duly painted same as existing colour of fan complete all as specified and directed.

S & F in repair exhaust fan louvers for following size complete all as specified and directed :-

All as per item No. 18.00 here in before but 300/380 mm Sweep

All as per item No. 18.00 here in before but 450 mm Sweep

M & L for painting of ceiling fan of any sweep complete in situ with one coat of synthetic enamel white paint by spray painting including filling cavities with filler after cleaning of dust etc complete all as specified and directed.

M & L for painting of exhaust fan of any sweep complete in situ with one coat of synthetic enamel black / grey paint by spray painting including filling cavities with filler after cleaning of dust etc complete all as specified and directed.

S&F switch in repair piano flush type 5/6 amps, single pole one way 240 volts, 50Hz, AC, ISI marked complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair socket out let 2 in 1,multipurpose 3 pin 5/6 Amp flush type, 240 volts, AC complete all as specified & directed. Make : Cona / SSK / Havells

S&F in repair socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all as specified & directed. Make : Cona / SSK / Havells

S&F in repair switch socket combination 2 in 1, 3 Pin 5/6 Amp flush type, 230 Volt AC complete all as specified & directed. Make : Cona / SSK / Havells

S&F in repair socket out let 2 in 1,multipurpose 3 pin 15/16 Amp, 230 Volts, AC< flush type ISI marked complete all, as specified & directed. Make : Cona / SSK / Havells

S&F in repair bell push piano flush button type 5 Amp, 240 Volt, 50Hz, AC, ISI marked complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair ceiling rose surface bakelite, 3 terminals, 63.5 x 17 mm complete all as specified & directed. Make : Cona / SSK / Havells

S&F in repair bell ding dong type AC 240 volt complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular switch 1 way 6/10 Amp, 1 moudle, 230 Volt, AC 50Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular switch 1 way 15/16 Amp, 1 moudle, 230 Volt, AC 50Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular socket 15/16 Amp, 2/3 pin combined 2 module, 230 Volt, AC, 50 Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular socket 5/6 Amp, 2/3 pin combined 2 module, 230 Volt, AC, 50 Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular ceiling fan regulator, AC 120W, 2 moudle complete all as specified and directed. Make:- Cona / SSK / Havells

S & F in repair top plug three pin 15 Amp complete all as specified and directed. Make : Cona/ SSK/ Havells

S & F in repair lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair LED driver suitable for 2x2', 36 W LED light fitting, 240 volts. 50 Hz complete all as specified and directed. Make: Bajaj/Wipro/CG/Philips/Havells as approved by GE.

S&F in repair single core 1.5 sqmm PVC insulated and unsheathed stranded copper conductor complete all as specified and directed.

S&F in repair single core 2.5 sqmm PVC insulated and unsheathed stranded copper conductor complete all as specified and directed.

S&F in repair single core 4 sqmm PVC insulated and unsheathed stranded copper conductor complete all as specified and directed.

S&F in repair MCB single pole 240 volt 10 KA breaking capacity, 6 to 32 Amp conforming to IS 8828 of 1996, Curve 'C' including connection with suitable size aluminium lugs complete all as specified & directed. Make : Legrand/ Siemens/ Schneider

S&F in repair MCB single pole and neutral 240 Volt 10 KA breaking capacity, 25 to 32 amp conforming to IS 8828 of 1996, Curve 'C' including connection with suitable size aluminium lugs complete all as specified & directed. Make : Legrand/ Siemens/ Schneider

S&F in repair MCB triple pole and neutral 240 Volt 10 KA breaking capacity, 40 to 63 amp conforming to IS 8828 of 1996, Curve 'C' including connection with suitable size aluminium lugs complete all as specified & directed. Make : Legrand/ Siemens/ Schneider

S & F in repairs heating element round / triangle base including rubber ring, washer, holding clamps and nuts of following capacity complete all as specified and directed. Make :- BAJAJ / RECOLD / THEETA or any other ISI marked as approved by GE.

All as per item No. 44.00 here in before but 1.50 KW capacity

All as per item No. 44.00 here in before but 2.00 KW capacity

S & F in repairs thermostat of temperature variation ranging from 0 degree centigrade to 80 degree centigrade suitable for 25 litres and 50 litres capacity geyser complete all as specified and directed. Make :- Ranutrol / Indofoss or any other ISI marked as approved by GE.

S & F in repairs heating element 2KW with inbuilt thermostat including rubber ring, washer, holding clamps and nuts of following capacity complete all as specified and directed. Make :- BAJAJ / RECOLD / THEETA or any other ISI marked as approved by GE.

Taking down old unserviceable PVC connection and S & F PVC connection, Mesh type heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

Taking out old unserviceable apparatus plate assembly and supply & fix new apparatus plate with rubber gasket, nuts and bolts of suitable size for following capacity of Storage type heater (geyser) vertical type complete all as specified and directed :-

All as per item No. 48.00 here in before but 25 Litres capacity

All as per item No. 48.00 here in before but 50 Litres capacity

M & L for preparation of old outer surfaces of storage type heater (geyser) of following capacity, type and applying two coat of synthetic enamel paint (1st quality) of approved tint by spray and including writing MES No, figure (BLOCK, ROMAN or INDIAN) with black synthetic enamel paint (1st quality) 2cm high of complete all as specified and directed :-

All as per item No. 49.00 here in before but 25 Litres capacity

All as per item No. 49.00 here in before but 50 Litres capacity

S&F in repair geyser inner tank of following capacity made out of stainless steel sheet of existing gauge confirming to IS 6/8/9 hole as per existing geyser complete all as specified and directed :-

All as per item No. 50.00 here in before but 25 Litres capacity

All as per item No. 50.00 here in before but 50 Litres capacity

Disconnecting & taking down carefully storage type water heater (geyser) 25/50 Ltr capacity, taking out heating element, thermostat and cleaning inner container by removing all scales etc and refixing of heating element, thermostat and reconnecting the same complete all as specified and directed.

S&F in repair 15 mm dia down rod of length as per site requirement , made out of high density mild steel, including drilling the hole for split pin and duly painted same as existing colour of fan complete all as specified and directed.

S&F in repair LED indicator red/green colour of any type of geyser complete all as per specified and directed.

S&F in repair modular white cover plate with frame for fixing of modular switches of following :-

All as per item No. 54.00 here in before but 12 module Make: Cona / SSK / Havells

All as per item No. 54.00 here in before but 8 module Make: Cona / SSK / Havells

All as per item No. 54.00 here in before but 06 module Make: Cona / SSK / Havells

All as per item No. 54.00 here in before but 04 module Make: Cona / SSK / Havells

All as per item No. 54.00 here in before but 03 module Make: Cona / SSK / Havells

All as per item No. 54.00 here in before but 02 module Make: Cona / SSK / Havells

All as per item No. 54.00 here in before but 01 module Make: Cona / SSK / Havells

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser & AC complete all as specified and directed.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

S&F in repair LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel with Al. heat sink inside fixture, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make:- Crompton Cat part No for batten DSGLT8-14, for tube rod LT8-20-865-2, Havells Cat part No for batten STREAKT8UPTO1X22WSSBSWH, for tube rod PHOTONULTRAE2.01213T8SSTL20WLED865SPC, or equivalent in Philips.

S&F in repair testing and commissioning energy saving street light luminaire 35/40 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge. Make: Crompton Cat Part No TRP-400-35-57-SL-LM-NSR, Havells Cat Part No ENDCITYLITPLAT+SL35WLED757SASYBOPCWOSPD or equivalent in Philips.

S&F in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. Make: Crompton Cat Part No. TIS-304-10-57-SL-DP-NWH or equivalent in Philips/Havells

S&F in repair LED mirror light fitting, 10 watt, 590 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. Make: Crompton cat part no. TCS-104-10-65-SL-DP-NWH or equivalentHavells//Philips

S&F in repair wall mounted decorative luminarie fitting suitable up to 9/10 Watt LED lamp B-22 base incl LED lamp 9/10 watt B-22 base complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No LHDL02160099, Crompton Cat part no. TIS-304-10-57-SL-DP-NWHor equivalent in Philips.

S&F in repair recess mounted LED 12 watt Slim edge lit panel minimum lumen output 120 lumens/Watt, total system lumens 1440, compact, aluminum die cast housing, round fixture with opal diffuser and separate electronic driver complete all as specified and directed by Engr-in-Charge. Make :- Crompton Cat No LSCRM-12W-CDL, Havells Cat Part No INTEGRANEODLR12WLED857S or equivalent in Philips.

S&F in repair surface mounted LED downlight 15 watt round shaped, Slim surface mounted LED panel with Al.die cast body with minimum system lumen efficacy >100 lumen/watt & total system lumens >1500 with premium diffuser to ensure glare free & even light distribution complete all as specified and directed. Make: Crompton Cat No. LCDSPLN-R-15-CDL, Havells Cat Part No INTEGRANEOSURFACEDLS15WLED830S or equivalent in Philips.

S&F in repair surface mounted LED downlight 18 watt round shaped, Slim surface mounted LED panel with Al.die cast body with minimum system lumen efficacy >120 lumen/watt & total system lumens >2150 with premium diffuser to ensure glare free & even light distribution complete all as specified and directed. Make :- Crompton cat part no. LCDSPLN-R-18-CDL Havells, Model -Trim Cosmo Surface Round, Cat Part No LHEAAHP7IL1W018, or equivalent model of Philips

S&F in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, lumen efficacy >100 Lm/w complete all as specified and directed. Make:- Crompton cat part no. TCR-145-36-65-SL-NWH, Philips Cat Part No RC383B LED 36S-4000 PSU OD WH PIR, or equivalent Havellls.

S&F in repair surface mounted 2' x 2' LED luminarie 36/32 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, system lumen efficacy >120 Lm/W, complete all as specified and directed. Make :-Philips Cat Part No SM366C LED32-6500 PSU OD GR, Crompton Cat Part No. LCTLSNE-36-FO-CDL.

S & F in repair high efficiency round highbay with circular form factor and available in both Narrow & wide beam optics of IP lens/PC cover and luminaire in pressure die cast housing for industrial application 150 watt, system lumen efficacy >150 Lm/W Total System lumens 22500, 5700K IP66 protection including LED Potted driver complete all as specified and directed. Make :-Crompton cat part no. CIP-326-150-57-60D-HL5-LM-NSG or equivalent in Havells, Philips.

S&F in repair street light bracket made of GI pipe , 1.2 mtr length fixed with two nos of clamp , nut and bolts complete all as specified and directed.

MITTAL ENTERPRISES

H M LAXMINARAIN

KIRTIMAN ENTERPRISES

ENGINEER CORPORATION OF INDIA

S S TRADERS

M/S MAMTA CONSTRUCTIONS