SUPPLY and ERRECTION OF COMPLETE ELECTRICAL SYSTEMS ON TURN KEY BASIS For Common Facility Centre of Nagpur Agarbatti Cluster Association Pvt Ltd. Umred, Dist Nagpur

11kV Two Pole structure with all accessories including Cross Arm and all neccessory material and hardware

11kV DO,Isolator and LA with complete accessories -200A

630 KVA Transformer, 11/0.433KVA,3Phase,50Hz,Level-3 with OLTC,lifting arrangement IP-23,Class of Insulation"A'', .

11KV OUTDOOR Load Break Switch

11KV Metering Kiosk

D.G. Set, coupled to alternator with acoustic Encloser and Standard control panel.-(125KVA )

AMF Panel suitable for 125KVA D.G.Set

3C X 150 Sqmm 11KV(E) XLPE Armored cable

Outdoor type end termination 11KV FOR 3C X 150 Sqmm cable

100mm dia GI Glass-C type pipe

Earthing pits for body of Transformer/HT/LT Panels (Complete material supply and installations like earthrod, charcole etc)

Earthing strip 50X6mm GI

Earthing strip 25X3mm GI

Cu strip 50X5 mm

Fabrication of Various sizes of angles ,channels,brackets ,frames etc. with approvad pain coatings as per client approval.

11KV Caution Board

11KV Hand gloves

First Aid Box

Shock treatment chard in Hindi,Marathi and English

Rubber mate suitable for 11KV grade, 12mm thick (2MtrX1Mtr)

Set of 3Nos fire bucket and sand with stand

Danger Board

Approved Single Line Diagram framed in A2 size glass frame

Description of Work / Item(s)

11kV Two Pole structure with all accessories including Cross Arm and all neccessory material and hardware

11kV DO,Isolator and LA with complete accessories -200A

630 KVA Transformer, 11/0.433KVA,3Phase,50Hz,Level-3 with OLTC,lifting arrangement IP-23,Class of Insulation"A'', .

11KV OUTDOOR Load Break Switch

11KV Metering Kiosk

D.G. Set, coupled to alternator with acoustic Encloser and Standard control panel.-(125KVA )

AMF Panel suitable for 125KVA D.G.Set

3C X 150 Sqmm 11KV(E) XLPE Armored cable

Outdoor type end termination 11KV FOR 3C X 150 Sqmm cable

100mm dia GI Glass-C type pipe

Earthing pits for body of Transformer/HT/LT Panels (Complete material supply and installations like earthrod, charcole etc)

Earthing strip 50X6mm GI

Earthing strip 25X3mm GI

Cu strip 50X5 mm

Fabrication of Various sizes of angles ,channels,brackets ,frames etc. with approvad pain coatings as per client approval.

11KV Caution Board

11KV Hand gloves

First Aid Box

Shock treatment chard in Hindi,Marathi and English

Rubber mate suitable for 11KV grade, 12mm thick (2MtrX1Mtr)

Set of 3Nos fire bucket and sand with stand

Danger Board

Approved Single Line Diagram framed in A2 size glass frame

Description of Work / Item(s)

LT Panels Supply,Installation testing and commissoning of LT Panel, Scope of work Supply,Unloading at site, shifting to final location, assembling, leveling, grouting, erecting, testing and commissioning of following panels as per drawings. requie all tools & takles for installation Any fabrication work required for erection of panel at site shall be done by the contractor (COST OF SUPPLY OF STEEL NOT IN INCLUDING IN RATE). The contractor shall also check for all the loose joints and continuity of the panel.

Main PCC Panel as per Single line drawing enclosed.

Sub Main PCC-1 Panel as per Single line drawing enclosed.

Sub Main PCC-2 Panel as per Single line drawing enclosed.

Sub Main PCC-3 Panel as per Single line drawing enclosed.

MLDB as per Single line drawing enclosed.

LDB as per Single line drawing enclosed.

Please Note:- All MCCB's must be provided with panel operating mechanism & spacer sets for all terminals. All MCCB's of 200A and above rating should be 36kA rating, 100A MCCB should be 25kA rating and All MCB's should be of 10kA rating with C curve. The drawings for panel shall be approved before Start manufacturing and sizes, minor changes if any are included in contractors scope only.

LT Cables and Terminations Supply, handling ,laying proper connections testing and commissioning of following sizes of 1.1KV grade PVC insulated Armored Copper/Aluminium conductor or cables laid over MS supports cable racks/trays or fixing of walls including clamping supports.The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated out of M.S. strip 3 mm thick, Treasing and Clamping of Cable on cable tray, supply of all clamping materials and hardware etc., providing cable tags made out of aluminium strip and 80x20 mm in size with cable number and size punched on it Or Plastic material with mark cable noumber / size . Cable tags shall be tied to cables at every 20 meter interval and at both the ends. FRLS CABLE ONLY

3.5C x 400 Sq. mm AL. XLPE Cable

3.5C x 300 Sq. mm AL. XLPE Cable

3.5C x 240 Sq. mm AL. XLPE Cable

3.5C x 185 Sq. mm AL. XLPE Cable

3.5C x 150 Sq. mm AL. XLPE Cable

3.5C x 120 Sq. mm AL. XLPE Cable

3.5C x 95 Sq. mm AL. XLPE Cable

3.5C x 70 Sq. mm AL. XLPE Cable

3.5C x 50 Sq. mm AL. XLPE Cable

3.5C x 35 Sq. mm AL. XLPE Cable

3.5C x 25 Sq. mm AL. XLPE Cable

4C x 16 Sq. mm Cu. XLPE Cable

4C x 10 Sq. mm Cu. XLPE Cable

4C x 6 Sq. mm Cu. XLPE Cable

4C x4Sq. mm Cu. XLPE Cable

4C x2.5Sq. mm Cu. XLPE Cable

3C x2.5Sq. mm Cu. XLPE Cable

Supplying and fixing Double compression type brass cable glands for PVC and armored cable with brass washers, rubber rings complete erected with cable ends leads including supply and fixxing of Cu/Al lugs confirming to IS suitable for cables evenly crimped with crimping paste.

3.5C x 400 Sq. mm AL. XLPE Cable

3.5C x 300 Sq. mm AL. XLPE Cable

3.5C x 240 Sq. mm AL. XLPE Cable

3.5C x 185 Sq. mm AL. XLPE Cable

3.5C x 150 Sq. mm AL. XLPE Cable

3.5C x 120 Sq. mm AL. XLPE Cable

3.5C x 95 Sq. mm AL. XLPE Cable

3.5C x 70 Sq. mm AL. XLPE Cable

3.5C x 50 Sq. mm AL. XLPE Cable

3.5C x 35 Sq. mm AL. XLPE Cable

3.5C x 25 Sq. mm AL. XLPE Cable

4C x 16 Sq. mm Cu. XLPE Cable

4C x 10 Sq. mm Cu. XLPE Cable

4C x 6 Sq. mm Cu. XLPE Cable

4C x4Sq. mm Cu. XLPE Cable

4C x2.5Sq. mm Cu. XLPE Cable

3C x2.5Sq. mm Cu. XLPE Cable

Earthing SITC of 600 x600 x6mm GI Earthing Plate type as per BIS 3043, with specifically prepared earth pit of 3.0 mtrs deep. With alternale layers of charcoal & salt, 50X6mm GI. Earth Strip from eath plate up to surface with Plated Nut Bolts. Earth Strip shall have two holes at the top to provided good earthing continuity for the earth strip connectd to earth pit. CI Funnel,Rigid PVC Rectangular inspection chamber approximately 1'X11/2' with removable cover (Jain irrigation Make) etc complete. Earth pits to be marked with paint for earth pit numbering. (Consider Hard Murum Soil Strata) (provisional Quantity)

GI Strip 50x6mm

GI Strip 25x3mm

8 SWG G.I Rope Wire with Lugs (for DB's)

Lighting Protections

AIR TERMINATION Supply, Installation ,Testing and commissioning ofControlled early stremer emmission(CESE) lighting conductor, equiped with a tined copper central pick up rod , full electrical continuity between the tip and earth point , fully autonoumus ( no battery, no exeternal power supply required), collect ambient energy through a lower series of electrodes, timing of the steamer emmission controlled with an electronic device that detects the lighting and triggers a streamer (3.5KV and 20 A), manufactured as per NFC 17-102 with dedicated tester available for maintenance purpose, tested in high voltage laboratory (CPRI) as well as in real lighting conditions including all necessary accessories etc. Radius protection at 5Mts height with level II protection-100m

GI Elevation Pole Supply & Installation of GI Elevation pole with a reducer to fix the LA unit ,Base Plate, Clamps and all required fixing accessories.

Down Conductor 25X5mm copper Strip with Insulator or 35 sq. mm copper cable flexible type

Down Conductor Supply of test clamp to connect the down conductor to the earth termination and disconnect the down conductor from the earth termination for regular checks of the earth termination resistance value.

Performance Recording Equipment Supply & Installation of Lighting flash counter, electonically controlled, register every strike between 1000A to 100kA for 8/20 microsecond peak current, tested in high voltage laboratory (CPRI).

Cable Trays Supply,installation of 2MM hot dip galvanised, heavy duty,Ladder /perforatedtype cable tray as mentioned below. The rate shall include following. (a)Supply of required sized cable trays made from minimum 2 MM M.S.sheet with cross, tees, bends, reducers, coupler fittings etc. (80-100 MICRON) LADDER/PERFORATED type cable tray & 5 mm rod electro zink for wire mash cable tray with jointing plate & hardware (b)Fixing of cable tray on G.I. hangers , suspension hooks/ rod or 12 mm full theared , clamps, clips etc.with anchor fashner size of anchor fashner as per wieght of cable tray +cable support every 1500- 2000 mm (c)Fixing of cable tray on the support, brackets, hangers, with all necessary G.I. hardwares like bolt, nut, washers, etc. The rate shall include the cost of all necessary tools, hardwares, materials, labour, etc. but shall not include the cost of supply of M.S. angle/channel supports. The work shall be carried out as per the standered practice and as per the guide line given by cable tray manufacturers and to the satisfaction of engineer incharge or consultants.

450x50mm Perforated Type Tray

300x50mm Perforated Type Tray

150x50mm Perforated Type Tray

75x25mm Perforated Type Tray with cover 1.6MM

Point Wiring and Lightings

Light point wiring using mms grade quality PVC conduits along with all required accessories mounted on ceiling with required spacers & saddles along with 2 runs of 2.5 sq mm copper flexible wire as per approved make and 1.5 sqmm copper flexible green colur wire for earthing complete with termination of wires at light fittings.

Circuit wiring from MCBDB up to first point consisting of 2 runs of 2.5 sq.mm. copper flexible wires & 1 run of 1.5 sq.mm copper flexible wire for earthing in 20/25 mm MMS grade PVC conduit of approved make complete including fixing of conduit on ceiling.

Supply ,Installation and commissioning of 18Watt Tube light Fittings

Supply ,Installation and commissioning of 150Watt High bay Lights

Description of Work / Item(s)

LT Panels Supply,Installation testing and commissoning of LT Panel, Scope of work Supply,Unloading at site, shifting to final location, assembling, leveling, grouting, erecting, testing and commissioning of following panels as per drawings. requie all tools & takles for installation Any fabrication work required for erection of panel at site shall be done by the contractor (COST OF SUPPLY OF STEEL NOT IN INCLUDING IN RATE). The contractor shall also check for all the loose joints and continuity of the panel.

Main PCC Panel as per Single line drawing enclosed.

Sub Main PCC-1 Panel as per Single line drawing enclosed.

Sub Main PCC-2 Panel as per Single line drawing enclosed.

Sub Main PCC-3 Panel as per Single line drawing enclosed.

MLDB as per Single line drawing enclosed.

LDB as per Single line drawing enclosed.

Please Note:- All MCCB's must be provided with panel operating mechanism & spacer sets for all terminals. All MCCB's of 200A and above rating should be 36kA rating, 100A MCCB should be 25kA rating and All MCB's should be of 10kA rating with C curve. The drawings for panel shall be approved before Start manufacturing and sizes, minor changes if any are included in contractors scope only.

LT Cables and Terminations Supply, handling ,laying proper connections testing and commissioning of following sizes of 1.1KV grade PVC insulated Armored Copper/Aluminium conductor or cables laid over MS supports cable racks/trays or fixing of walls including clamping supports.The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated out of M.S. strip 3 mm thick, Treasing and Clamping of Cable on cable tray, supply of all clamping materials and hardware etc., providing cable tags made out of aluminium strip and 80x20 mm in size with cable number and size punched on it Or Plastic material with mark cable noumber / size . Cable tags shall be tied to cables at every 20 meter interval and at both the ends. FRLS CABLE ONLY

3.5C x 400 Sq. mm AL. XLPE Cable

3.5C x 300 Sq. mm AL. XLPE Cable

3.5C x 240 Sq. mm AL. XLPE Cable

3.5C x 185 Sq. mm AL. XLPE Cable

3.5C x 150 Sq. mm AL. XLPE Cable

3.5C x 120 Sq. mm AL. XLPE Cable

3.5C x 95 Sq. mm AL. XLPE Cable

3.5C x 70 Sq. mm AL. XLPE Cable

3.5C x 50 Sq. mm AL. XLPE Cable

3.5C x 35 Sq. mm AL. XLPE Cable

3.5C x 25 Sq. mm AL. XLPE Cable

4C x 16 Sq. mm Cu. XLPE Cable

4C x 10 Sq. mm Cu. XLPE Cable

4C x 6 Sq. mm Cu. XLPE Cable

4C x4Sq. mm Cu. XLPE Cable

4C x2.5Sq. mm Cu. XLPE Cable

3C x2.5Sq. mm Cu. XLPE Cable

Supplying and fixing Double compression type brass cable glands for PVC and armored cable with brass washers, rubber rings complete erected with cable ends leads including supply and fixxing of Cu/Al lugs confirming to IS suitable for cables evenly crimped with crimping paste.

3.5C x 400 Sq. mm AL. XLPE Cable

3.5C x 300 Sq. mm AL. XLPE Cable

3.5C x 240 Sq. mm AL. XLPE Cable

3.5C x 185 Sq. mm AL. XLPE Cable

3.5C x 150 Sq. mm AL. XLPE Cable

3.5C x 120 Sq. mm AL. XLPE Cable

3.5C x 95 Sq. mm AL. XLPE Cable

3.5C x 70 Sq. mm AL. XLPE Cable

3.5C x 50 Sq. mm AL. XLPE Cable

3.5C x 35 Sq. mm AL. XLPE Cable

3.5C x 25 Sq. mm AL. XLPE Cable

4C x 16 Sq. mm Cu. XLPE Cable

4C x 10 Sq. mm Cu. XLPE Cable

4C x 6 Sq. mm Cu. XLPE Cable

4C x4Sq. mm Cu. XLPE Cable

4C x2.5Sq. mm Cu. XLPE Cable

3C x2.5Sq. mm Cu. XLPE Cable

Earthing SITC of 600 x600 x6mm GI Earthing Plate type as per BIS 3043, with specifically prepared earth pit of 3.0 mtrs deep. With alternale layers of charcoal & salt, 50X6mm GI. Earth Strip from eath plate up to surface with Plated Nut Bolts. Earth Strip shall have two holes at the top to provided good earthing continuity for the earth strip connectd to earth pit. CI Funnel,Rigid PVC Rectangular inspection chamber approximately 1'X11/2' with removable cover (Jain irrigation Make) etc complete. Earth pits to be marked with paint for earth pit numbering. (Consider Hard Murum Soil Strata) (provisional Quantity)

GI Strip 50x6mm

GI Strip 25x3mm

8 SWG G.I Rope Wire with Lugs (for DB's)

Lighting Protections

AIR TERMINATION Supply, Installation ,Testing and commissioning ofControlled early stremer emmission(CESE) lighting conductor, equiped with a tined copper central pick up rod , full electrical continuity between the tip and earth point , fully autonoumus ( no battery, no exeternal power supply required), collect ambient energy through a lower series of electrodes, timing of the steamer emmission controlled with an electronic device that detects the lighting and triggers a streamer (3.5KV and 20 A), manufactured as per NFC 17-102 with dedicated tester available for maintenance purpose, tested in high voltage laboratory (CPRI) as well as in real lighting conditions including all necessary accessories etc. Radius protection at 5Mts height with level II protection-100m

GI Elevation Pole Supply & Installation of GI Elevation pole with a reducer to fix the LA unit ,Base Plate, Clamps and all required fixing accessories.

Down Conductor 25X5mm copper Strip with Insulator or 35 sq. mm copper cable flexible type

Down Conductor Supply of test clamp to connect the down conductor to the earth termination and disconnect the down conductor from the earth termination for regular checks of the earth termination resistance value.

Performance Recording Equipment Supply & Installation of Lighting flash counter, electonically controlled, register every strike between 1000A to 100kA for 8/20 microsecond peak current, tested in high voltage laboratory (CPRI).

Cable Trays Supply,installation of 2MM hot dip galvanised, heavy duty,Ladder /perforatedtype cable tray as mentioned below. The rate shall include following. (a)Supply of required sized cable trays made from minimum 2 MM M.S.sheet with cross, tees, bends, reducers, coupler fittings etc. (80-100 MICRON) LADDER/PERFORATED type cable tray & 5 mm rod electro zink for wire mash cable tray with jointing plate & hardware (b)Fixing of cable tray on G.I. hangers , suspension hooks/ rod or 12 mm full theared , clamps, clips etc.with anchor fashner size of anchor fashner as per wieght of cable tray +cable support every 1500- 2000 mm (c)Fixing of cable tray on the support, brackets, hangers, with all necessary G.I. hardwares like bolt, nut, washers, etc. The rate shall include the cost of all necessary tools, hardwares, materials, labour, etc. but shall not include the cost of supply of M.S. angle/channel supports. The work shall be carried out as per the standered practice and as per the guide line given by cable tray manufacturers and to the satisfaction of engineer incharge or consultants.

450x50mm Perforated Type Tray

300x50mm Perforated Type Tray

150x50mm Perforated Type Tray

75x25mm Perforated Type Tray with cover 1.6MM

Point Wiring and Lightings

Light point wiring using mms grade quality PVC conduits along with all required accessories mounted on ceiling with required spacers & saddles along with 2 runs of 2.5 sq mm copper flexible wire as per approved make and 1.5 sqmm copper flexible green colur wire for earthing complete with termination of wires at light fittings.

Circuit wiring from MCBDB up to first point consisting of 2 runs of 2.5 sq.mm. copper flexible wires & 1 run of 1.5 sq.mm copper flexible wire for earthing in 20/25 mm MMS grade PVC conduit of approved make complete including fixing of conduit on ceiling.

Supply ,Installation and commissioning of 18Watt Tube light Fittings

Supply ,Installation and commissioning of 150Watt High bay Lights