Provision of Street light from OERC Square to New Mayfair Sanctuary and OERC Lane

Supply & fixing of 8 Mtr long internally and externally HotDip Galvanized Octagonal pole made up of top dia 90 mm & bottom dia 190 mm and 3.1 mm thick HTSteel sheet conforming to grade S355JO, E350withweather proof and vandal resistant pole. BasePlate Size 300 X 300 X 20 mm thick shall be welded (Inside& outside) with pole shaft, 4 Nos M24 X 850 mm long J Bolt along with Temp plate, 3 Nos Nut &washer, including inbuild JB, containing (SP MCB,Terminal Stud, Backlite Sheet, SS hardwire Etc) (Make- Bajaj/ Utkarsh/ Utkal Galvanizers/ Crompton or reputed company only)

Supply & fixing of 8mtr long Hot Dip Galvanized swagedtype steel tubular pole with MS base plate 300X300X6 mm and having pole dimensions: - Bottom: - 114.3 OD X5.40mmX4.5mtr long, Middle: 88.9 OD X 4.85 mm thickness X 1.75mtr long, Top: - 76.1 OD X 3.25 mm thickness X 1.75mtr long.(Make- Bajaj/ Utkarsh/ Utkal Galvanizers/ Crompton or reputed company only)

Supply & fixing of 50mm dia Detachable Single arm (1mtr long) bracket for Tubular Pole

Supply & fixing of Hot dip Galvanized 1 Mtr. Long Double arm 50mm bracket suitable for carrying diff erentwattage Street light for Octagonal pole

Supply & fixing of 48.4MM OD HDG ROUND Arm (1 Mtr Long) for Triple arm bracket suitable for carryingdiff erent wattage Street light for Octagonal pole

Construction of R.C.C foundation for errection of 8Mtr / 9 Mtr Street light pole (Detailed specification given by EIC before start the work)

Labour charges towards installation of steel tubular pole including concreting of pole base and cooping (As per direction of engineer in charge).

Supply & Fixing of Coil earthing for existing pole.

Supply & Installation of 120W LED Street light Specification- with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year & the company should be maintain 7 year spare in Bhubaneswar service centre. (BMC should be printed on the lights along with month/ year of manufacturing)(Make- E-Smart/ NEEV/ Crompton/ Bajaj/ Panasonic/ WIPRO/ Havells/ Philips/Surya or equivalent make of reputed company only)

Supply and stringing of 1x35+1x25 mm2 LT x LPE AB Cable with all accessories. As per site requirement.