Providing 100KVA UPS system for operation theatre No one two three four five six seven and eight at Surgical block C at IGMC Shimla

Amount

Supplying, installation, testing and commissioning of modular 100 KVA / 100 KW online double covertor UPS suitable for AC three phase input 415 volt 15% + 10% and AC 3 phase output 400 volt, 50 Hz + -1%. Pure signwave output for low noise and smooth operation, SMD based design, 7" touch LCD display, thermal protection, 200 KW static by pass switch with batter 150 AH / 12V 40 Nos. battery rack and interlinks. The cabinet sizing is 125KW cabinet with 4X25 Kw modules as required complete in all respects.

100 KVA on the line UPS

Motorised changeover switch 250 Amp. 4 pole 1No.

MCCB 250 Amp 4 pole alongwith extended terminal 1 No.

Outgoing

MCCB 100 A 4P 25KA alongwith extended terminal 6 No.

Spreader link 100A 4P 6 Set

The Cost shall include all charges for fixing of panel at site including cost of termination of cables and cost of platform for fixing the panel.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way

Double door-4 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

250 Amp. -35 KA

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x6.0 Sq. mm.

2x10 Sq. mm.

Supplying and fixing L & T make enclosure for 250 Amp L & T make MCCB as required complete in all respects.

Supplying and fiixng LG / Havells make split AC 2.5 ton complete with outer and inner units for cooling purpose as required complete in all respects.

Elsan Electricals Eneterprises