Loading
Loading…
Loading…
Tender Value
₹80.6 L
EMD Value
₹1.6 L
Closing Date
19 Aug 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
15 conditions · 4 needing a document upload
Clause Regarding GST: (a) All the Bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure are as per GST LAW.(b) Tenderer Should Furnish their GSTIN numbers representing the States in Which they are registered GST, along with address of Registered Office.(c)The Contract is under GST Act and rules as applicable time to time.
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Annual Contractual Turnover Data for the Previous 3/4 Years should be submitted as per Annexure-IX.(AnnexureVIB of Tender Documents)
41 conditions · 11 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
AT TSK Division: Furkating Jn- Jorhat Town,Furkating Jn.- New Tinsukia -Dibrugarh & Makum -Ledo -Electrical work for Provision of Machine siding - 02, 05 & 03 stations respectively. (TTB, SFR, NAM, DJG, DBRG, BBGN, JTTN, MJN, DBY and LLO)
LV-T-14-TSK-955
LV-T-14-TSK-955
Open
Works - General
14 Months
Tinsukia, Assam
₹0
₹1.6 L
19 Aug 2026
28 Jul 2026
5 Aug 2026
49 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 80,62,095 | ||
| — | 4600.00 | — | — | ||
| Supply, laying,connection, testing and commissioning of cable size 35 mm.sq. 4 core ,LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured cable having Aluminium Strip, Glavanised Wire Solid Aluminum Conductor, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 38,36,400 | |
| — | 2500.00 | — | — | ||
| Supply, laying,connection, testing and commissioning of cable size 16 mm.sq. 2 core ,LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured cable having Aluminium Strip, Glavanised Wire Solid Aluminum Conductor, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 10,67,500 | |
| — | 60.00 | — | — | ||
| Supplying, testing and commissioning of heat shrinkable LT cable end termination kit conforming to IS/IEC 60502-4, suitable for 35 sq.mm, 4-core, 1.1 kV grade XLPE insulated, armoured aluminium conductor cable conforming to IS 7098 (Part 1), complete with heat shrinkable sleeves, breakout, anti-tracking tubing, sealing mastic, stress control components, insulating materials and all accessories required for complete termination, including installation, testing and commissioning, as directed by the Engineer-in-Charge. | — | — | — | 1,69,200 | |
| — | 60.00 | — | — | ||
| Supplying and making end termination of 35 sq.mm, 4-core, 1.1 kV grade XLPE insulated, aluminium conductor armoured cable with double compression brass cable gland, aluminium crimping lugs, PVC shrouds, nuts, bolts, washers and all accessories, including crimping, dressing, ferruling and testing, complete in all respects as directed by the Engineer-in-Charge. | — | — | — | 22,200 | |
| — | 40.00 | — | — | ||
| a) Supply and erection of single arm type Hot Dip Galvanized in single deep to average 65 micron DFT 7 mtr. long octagonal pole similar to NEZONE cat. No. NZOP7 with sectional dia 130x70 mm, overall sectional thickness 3 mm complete with base plate size 220x220x12 mm, 4 Nos. 700 mm long foundation bolt of 20 mm dia with all other accessories as per direction of Engineer in charge at site. b) Supply and erection of PCC/RCC/shallow foundation of size and depth as per recommendation and drawing of the manufacturer (approx. 1.6 mtr.x 0.6 mtr.x0.6 mtr.) with excavation of earth for foundation of all depth and all places, nature and condition of soil including de-watering, shoring, shuttering, batching, mixing, placing, leveling, carrying etc and re-filling the pit after completion of foundation work from excavated earth or borrowed pit by contractor's own arrangement for octagonal poles. Drawing of foundation details, loading, sectional plan bar bonding schedule etc. should be submitted before execution to get the approval from Rly. competent authority. c) Supply and erection of suitable size galvanized single arm bracket 1.5 mtr. long along with spigot for holding/supporting one no. street light fitting. | — | — | — | 6,39,960 | |
| — | 50.00 | — | — | ||
| Supply & erection of earth by 80 mm dia 3 Mtrs. long (4.5 mm thickness) GI pipe ,8 SWG GI wire, GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with cement concrete plate having locking arrangement. | — | — | — | 1,56,300 | |
| — | 30.00 | — | — | ||
| Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables. | — | — | — | 2,68,170 | |
| — | 150.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of light point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose, GI box with suitable modules for fixing switches. | — | — | — | 74,250 | |
| — | 50.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of Fan Point/Exhaust fan point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A,ceiling rose,Modular GI metal box with suitable modules for fixing switches & Regulators as required and 1.0 sq mm multistrand FRLS copper Cable in green for earth contuinity wire . | — | — | — | 28,550 | |
| — | 60.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 5 A plug point from main/sub-main board to the points by 1.5 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 5 A,GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 25,680 | |
| — | 50.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 15 A plug point from main/sub-main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 15 A , GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 61,500 | |
| — | 900.00 | — | — | ||
| Supply, drawing and connection of single core 4 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 51,030 | |
| — | 2500.00 | — | — | ||
| Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 97,000 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of VTPN Distribution Board System type 4 way double door, IP 43 Protection with MCCB as incomer with the following switchgears and Cement Spill Protector & Door Earthing with the following domestic switchgears:-: (i) MCCB, 4 pole, 100 Amps, 16 KA BC= 1 No (ii) MCB , SP, 63 Amps, 'C' series=4 Nos. (iii) MCB, SP, 32 Amps, 'C' series=3 Nos | — | — | — | 3,10,000 | |
| — | 20.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wall mounted type 6 way double door SPN MCB DB having IP 43 protection,Shrouded Neutral Bar & Bus Bar, Cement Spill Protector & Door Earthing with the following domestic switchgears:- :- i) 240/415V, 50Hz, 10kA BC "C" series SP 32 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 No. ii) 240V, 50Hz, with 10kA BC "C" series SP 16 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 Nos. (iii) 240V, 50Hz, with 10kA BC "C" series SP 10 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 Nos. | — | — | — | 75,000 | |
| — | 70.00 | — | — | ||
| Supply, fitting, fixing of LED Street Light 45 W to be fixed on octagonal pole. Specification of 45 W Street light : Housing: Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistance. Cable gland is used for maintaining ingress protection, Finish: Epoxy powder coated siemens grey after phosphochromate treatment,Light source :High efficiency long life LED chip in modules with lumen efficacy of 110 lm/W with PC lens to ensure better uniformity of light distribution. Cover: Tempered protective toughened glass, thermal, shock and impact-resistant, fixed to the housing with SS screws. Electronic Driver: Built-in potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/Sec 13. | — | — | — | 3,30,400 | |
| — | 150.00 | — | — | ||
| Supply, fitting , fixing of surface mounted LED Batten 20W, 4 Ft, ultra slim co- extruded polycarbonate channel with integrated electronic driver should be as per IEC: 62384/IS:16104( SMPS based constant current output, THD<20%), IP20 protection, color temperature=6500K, rated input voltage=230V AC, 50 Hz, power factor=0.9, view angle>=120°, lumens output not less than 100 lm/Watt, operating voltage range: 140-270 V AC. LED Should be as per LM-80/IS:16105. Fixture Size:(LXWxH=1156x25x35 mm +/-1) . | — | — | — | 37,650 | |
| — | 10.00 | — | — | ||
| Supply, fitting, fixing of exhaust fan 300 mm sweep,230V AC,50Hz metallic louver type | — | — | — | 14,730 | |
| — | 40.00 | — | — | ||
| Supply, installation testing and commissioning of Energy Efficient Ceiling Fan 1200 mm sweep BLDC motor, BEE 5 star rated ceiling fan With regulator enable motor with power of 26 watt with 10% tolerance , motor insulation B type 220-240V 50Hz single phase with Speed minimum 350 rpm minimum air delivery 200 CMM complete set of 3 no's. blade , down rods, 2 nos canopies , shackle kit & all remaining accessories including nut bolts Washers complete as required . | — | — | — | 1,21,520 | |
| — | 10.00 | — | — | ||
| Supply , Fixing and testing of vertical type wall mounted storage Geyser of Capacity 25 Ltrs BEE 5 Star rated , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology for inner tank with incoloy heating element , ABS outer body , 2 units of PVC connector pipe with length of 450mm length for hot and cold water supply with complete accessories including external knob for temp control. | — | — | — | 1,20,630 | |
| — | 450.00 | — | — | ||
| Supplying, laying, fixing and testing of 25 mm dia medium class rigid PVC conduit conforming to IS:9537 (Part-3), complete with all accessories such as bends, elbows, couplers, junction boxes, saddles, inspection boxes, screws, rawl plugs, etc., including fixing on surface with suitable clamps/saddles at required intervals, complete in all respects as directed by the Engineer- in-Charge. | — | — | — | 65,250 | |
| — | 80.00 | — | — | ||
| Supply, installation, testing and commissioning of 10 W LED Bulkhead Luminaire, IP66 protection for Shed Over Pathway, with opal polycarbonate diffuser, suitable for operation on 240 V AC, 50 Hz single-phase supply, having minimum system efficacy of 100 lm/W, complete with integral LED driver, corrosion-resistant housing and all mounting accessories, including fabrication/provision of suitable mounting arrangement (pigeon-hole/bracket as required). Complete in all respects as directed by the Engineer-in-Charge.The luminaire shall conform to IS 10322 (Part 5/Section 1), IS 16102 (Part 1 & Part 2), IS 16107, and shall have an IP65 degree of protection as per IS/IEC 60529. | — | — | — | 1,88,800 | |
| — | 5.00 | — | — | ||
| Supply of Electrician Hand Tool Kit Box comprising of: (i) Hammer Drill Machine, 600 W, 230 V AC, 50 Hz (ii) Assorted Drill Bits, (iii) Measuring Tape, (iv) Chuck Key, (v) Electrician's Knife, (vi) Claw Hammer, 8 oz, (vii) Allen Key Set, (viii) Hex Bit Set, (ix) Adapter with Magnetic Bit Holder, (x) Side Handle, (xi) Screws and Plastic Wall Plugs (Dowels) (xii) Long Nose Plier, complete with durable carrying tool box/case and all standard accessories, conforming to relevant Indian Standards wherever applicable, complete in all respects as directed by the Engineer-in-Charge. | — | — | — | 19,475 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of Pure Sine Wave Inverter, 900 VA capacity, suitable for 230 V AC, 50 Hz single-phase input and output, with inbuilt intelligent battery charger, overload, short-circuit, overcharge and deep discharge protection, complete with all standard accessories, along with 1 No. 12 V, 150 Ah Tall Tubular Lead Acid Battery conforming to IS 13369, including necessary interconnections, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.Warranty: 2 Years,Battery Warranty: 36 Months. | — | — | — | 2,80,900 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11_compressed.pdf
ATTACHMENT
AnexxuresSectionVIINew.pdf
ATTACHMENT
TenderDocumentTSK955.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .