REPAIR TO CONCERTINA COIL BARBED WIRE FENCING BRICK WORK EARTH FILLING IN TRAVERSES AND OTHER MISC WORKS AT 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD

S&F in repairs circular concertina coil punched tape (incl spikes and handle) with 50turns and loop dia 750mm, width of barbed 9mm dia and spacing clips 23.5mm to 24.5mm c/c and weight of coil not less than 10 to 14 kg without packing, coil length will be 6meter when opened up etc, fixing at any position / at any height, binding with angle iron ground pickets and binding of coils with clips and binding wire as per manufacturer's instructions & sample as approved by Engr-in-Charge complete all as specified and directed

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed complete all as specified and directed

Restraining resecuring including making good staples etc, of galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire including dismantling old line wire fencing complete all as specified and directed

Supply only chain link MS galvanised fencing (wire dia 4mm, mesh size 50x50mm) complete all as specified and directed

S & F in repair posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 including two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of old posts complete all as specified and directed

S & F in repair Tie bars with screwed ends nuts, washers and mild steel plates for walls, chimneys, roofs arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 etc complete all as specified and directed.