RENOVATION OF VILLAGE PANCHAYAT SERVICE CENTRE BUILDING AT MAIPPARAI VILLAGE PANCHAYAT KURUVIKULAM BLOCK TENKASI DISTRICT

RENOVATION OF VILLAGE PANCHAYAT SERVICE CENTRE BUILDING AT MAIPPARAI VILLAGE PANCHAYAT IN KURUVIKULAM BLOCK _ TENKASI DISTRICT

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls - Pressed Tiles.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls - Ceramic Tiles.

Paving the floor with best quality Vetrified (Such as Morbonite - Stain Free Nano Vetrified Tiles) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Weathering course with brick jelly lime concrete using 20mm size Brick Jelly with pure Slacked Lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with Cement mortor 1:4 mix -20mm thick plastering including cost and conveyance of all materials to site and all labour charges for mixing, laying to proper gradient/ slope for water drain and curing etc complete

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same mortar mixed with water proofing compoud etc., complete

White washing two coats using Shell lime including cost and conveyance of all materials to site and all labour charges etc complete.

Distembering two coats Oil Bound Distember over priming coat inculding cost and conveyance of all materials to site and all labour charges for preparing the surface, scrapping, attaining smooth finish etc., complete (Inner wall)

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over Old Iron work such as doors, windows, ventilators, windows bars, balustrades etc., with best approved best quality of synthetic enamal paint of approved colour over the existing priming coat etc., complete.

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator) SD 25.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 88.

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") SD 106.

Supply and fixing of Rain water PVC pipe of 110mm dia with necessary Shoes, Bends, Tee, Clamps including glues and thread for joining the pipes and fixtures, labour charges etc., complete.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}