REPAIR/ MAINT OF VT/ CENTRIFUGAL PUMP/ SUBMERSIBLE PUMP, STARTER,MCCBS, WATER SUPPLY LINE (CI/GI/DI/PPR), RAISING MAINS, DELIVERY LINES, SLUICE VALVE, NON RETURN VALVE, CLEANING OF OVERHEAD TANK AND CONNECTED WORKS UNDER GE(N) MAMUN

Amount

Excavation in trenches n.exc 1.5mtr wide and n.exc 1.5mtr deep in any type of soil and getting out for laying of pipes complete all as specified and directed.

Returning, filling in trenches including , spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as spd and directed.

Taking out CI/DI/MS pipe 200 mm bore including fittings, control valves from the trenches/on pillars or in any condition complete all as specified and directed (Excavation and earth work shall be measured and paid for separately).

All as per Srl item No 04 but size of pipe 150mm bore

All as per Srl item No 04 but size of pipe 100 mm bore

Taking out existing unserviceable/serviceable GI Pipe 80mm bore from the trenches including disconnecting branch connections, fittings and control valves complete all as specified and directed (Excavation and earth work shall be measured and paid for separately).

All as per srl item No 07 but 50 mm bore

All as per srl item No 07 but 40 mm bore

All as per srl item No 07 but 25mm bore

All as per srl item No 07 but 20mm bore

All as per srl item No 07 but 15 mm bore

Re-laying in trenches cast iron pipe 200 mm bore with socket and spigot ends complete with all new fittings after cleaning throughly and removal of all blockages by using splitted bamboos/steel rod effectively (pipe taken out/obtained from item No 4 here as above) and including complete jointing materials all specified and directed .

All as per Srl item No 13 but 150mm bore

All as per srl item No 13 but 100mm bore

Re-laying only old serviceable GI Pipe 80mm bore including new GI fittings as per site requirement complete all as specified and directed.

All as per Srl item No 16 but 50 mm bore

All as per Srl item No 16 but 40 mm bore

All as per Srl item No 16 but 25 mm bore

All as per Srl item No 16 but 20 mm bore

All as per Srl item No 16 but 15 mm bore

Supply and laying in trenches or on pillars DI pipe 200 mm bore centrifuglly cast class K7 including Tyton joints in any length laid in trenches complete all as specified and as directed. (Make :- Electrosteel/ Rashmi/TATA) (Excavation/earth work if required, joints fittings shall be measured and paid for separately).

All as per Srl item No 22 but 150 mm bore.

All as per Srl item No 22 but 100 mm bore .

Supply and laying in trenches/on piller GI Pipe 80 mm bore medium grade ISI marked including all fitting laid in trenches/pillar/on wall complete as per site requirement complete. (Make: Jindal/Parkash Surya/Oswal)

All as per Srl item No 25 but 50 mm bore

All as per Srl item No 25 but 40 mm bore

All as per Srl item No 25 but 25 mm bore

All as per Srl item No 25 but 20mm bore

All as per Srl item No 25 but 15 mm bore

M&L in replacement of GI fittings of Tee, elbow, plug, bend, reducer socket and union socket or nipple socket etc of size from 15 mm to 80 mm bore all as specified and directed .

S&F DI/CI fittings such as bends, tees, tapers, tail pieces, flanges, collars etc of any size and shape as per site requirement confirming to IS-1538 upto 200 mm laid in trenches/on pillers complete all as specified and directed.

Taking out existing unserviceable/serviceable PPR Pipe 50mm bore from the trenches including disconnecting branch connections, fittings and control valves complete all as specified and directed (Excavation and earth work shall be measured and paid for separately).

All as per srl item No 33 but 40mm bore

All as per srl item No 33 but 25mm bore

All as per srl item No 33 but 20mm bore

Supply and laying 3-layer PP-R Polypropylene random copolymer concealed pipes 50 mm bore SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings laid in trenches complete all as specified and directed. Note : Joints of PP-R pipes, fittings etc shall be made by machine without any extra cost.

All as per srl item No 37 but 40mm bore

All as per srl item No 37 but 25mm bore

All as per srl item No 37 but 20mm bore

S&F cast iron sluice valve 200 mm borewith steel spendle PN 1.6 CI wheel flanged ends drilled holes including jointing material such as rubber gaskets, bolts, nuts & washers of suitable size including taking out unserviceable valve complete all as specifed and directed.

All as per Srl item No 41 but 150mm bore

All as per Srl item No 41 but 100mm bore

All as per Srl item No 41 but 80mm bore

S&F Gun metal gate valve 50mm bore with iron wheel head, screwed both ends for iron pipe fixing heavy duty including taking out unserviceable valve complete all as specified and directed.

All as per srl item 45 but 40 mm bore

All as per srl item 45 but 25 mm bore

All as per srl item 45 but 20 mm bore

All as per srl item 45 but 15 mm bore

Supply and fix in replacement PP-R Gate valves 25 mm bore(brass insert) complete all as spd and directed .

All as per srl item No 50 but 20 mm bore

All as per srl item No 50 but 40mm bore

Repair Non Return Valve 200 mm bore in position by replacement of UNSV Parts such as brass ring packing/Rubber packing, nuts,bolts, washers, rubber insertion sheet complete all as as specified and directed.

All as per Srl No 53 but 150 mm bore

Opening of stuffing box of sluice valve 200 mm bore and S&F in repair of U/S parts i.e. Stainless steel spindle, check nut fabricated out of superior quality all as per sample as required at site including replacement of unserviceable bolts, nuts & washers gaskets etc complete all as specified and directed.

All as per Srl item No 55 but 150mm bore

All as per Srl item No 55 but 100mm bore

All as per Srl item No 55 but 80mm bore

M & L for repair to leaking lead/tyton/flanged joint of any dia, CI/DI pipe line by cocking and inserting extra lead/tyton/gasket/nut bolts if required and making good leakless the existing joint, including necessary excavation and earth work (returning filling will be done after testing the joint) complete all as specified and directed.

M & L for repair to leaking fusion joint of PP-R pipe 3-layer of any dia including providing PP-R fittings as required at site, making good leakless the existing joint, excavation and earth work (returning filling will be done after testing the joint) complete all as specified and directed. Note: Joints of PP-R pipes, fittings etc shall be made by machine without any extra cost.

M & L for repair to leaking/block/broken joints, any dia GI pipe line by using (extra) new fittings/nut bolts if required and making good the joint leakless, including necessary excavation and earth work (returning filling will be done after testing the joint) complete all as specified and directed.

M&L for brick masonary valve pit of size 1200x1200x1200 mm (internal dimensions of chamber) including 23cm thick wall built in CM 1:6, 15mm thick plain cement plaster internally in CM 1:4 and flush pointing externally as the work proceeds, PCC 1:5:10 type E2 in foundation 156x156cm size 40mm thick PCC 1:2:4 type B-1 in floor, 50mm thick PCC 1:2:4 as coping over brick work, MS sheet cover with locking arrangement including lock of size 112x112cmx3 mm thick fixed to angle frame made out of 40x40x3mm angle iron, MS handle to sheet cover, MS hinges welded to frame and sheet cover, painted with two coats of synthetic black paint over a coat of red oxide primer on steel work, two coats of white wash on plaster work including excavation and earth work in any type of soil complete all as specified and directed internal and externally on steel work incl excavation and earth work complete all as specified and directed.

All as per Srl item No 62 but size 900x900x900 mm.

All as per srl item No 62 but internal size 600x600x600 mm.

M &L for cleaning to RCC semi under ground sump/RCC OH water storage reservoir 18 mtr staging or above of any type of capacity 25000glns by following process as under complete all as specified and direced :- (a) Dewatering the tank/sump with including all dirt dust and mud. (b) Desilting and removal of dirty water and sludge with wire brush inside wall and floor surfaces to remove impurities. (c) Cleaning of walls, ceiling and bottom of tank by high pressure water jet and bleaching powder. (d) Removing mud/impured material to a distance 10m away from sump. (e) Writing capacity and date of cleaning (Cleaned on___) with white and black synthetic enamel paint.

All as per item 65 but RCC OHR capacity 50000 glns

All as per item 65 but RCC OHR capacity 75000 glns

All as per item 65 but capacity 100000 glns

All as per item 65 but RCC Semi UG Sump capacity 100000 glns

S&F in repairs rolled Mild steel plates of FE 410 -10 (Gde-E 250) quality-A (Plain) thickness not less than 3mm (UG Sump/OHT/valve chamber cover) as required size including cover welded around with MS flat iron of required size with locking arrangements including painting with two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

M&L for opening of Gun metal gate valve, S&F in replacement of U/S parts i.e. spindle, iron wheel head, screwed both ends, check nut & washers suitable size out fabricated of superior quality etc. all as per sample as required at site for 50mm bore size of gate valves complete all as specified.

All as per srl item 71 but 40 mm bore.

All as per srl item 71 but 25 mm bore.

All as per srl item 71 but 15/20 mm bore.

Cleaning the vegetation including grass, bushes, small trees and all vegetation growth complete including digging out the root of bushes and small trees around the installation/sump/OH reservoir, valve chamber, including chamber etc filling the rough holes with earth and levelling the surfaces by removing all debris to a distance n.exc 50m complete all as specified and directed

M&L for Cutting and trimming of tree branches of girth upto 50 mm bore and 3 mtr all around of any size over head tank/UG sump including removing trimmed tree branches complete all as specified and directed. Note :- Each cut shall be measured and paid.

Supply and filling in dozing plant calcium based, high strength chlorination chemical for water disinfectant in granular form in factory sealed HDPE container (40 to 50 Kg each), chlorine concentration level 65-70% complete all as specified and directed.

M&L for bacteriological and chemical analysis of water (sample of borewell water) from DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot NOTE : (a) The water sample shall be carried in sterilised bottle/watercan which will be issued by DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot (b) The rate quoted shall be deemed to including transportation cost & cost of sterilised bottle.

Dismantling of mild steel work of any description including cutting, welding etc and S&F (welded) mild steel framed work such as ladders, walkways, railings, framework of water suplly installation and similar work confirming to FE-290, Grade E-165 including necessary welding, fixing with necessary cement work, including painting with two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

M & L for painting to valve chamber of any size (not more than 1200x1200mm) with two coats of antifungal exterior emulsion paint inside and outside of chamber, two coats of synthetic enamel paint over one coat of red oxide primer on chamber cover, cleanign/removing small bushes and grass inside & outside of valve chamber complete all as specified and directed.

S&F in replacement aviation obstruction light on top of Overhead Tanks yellow painted die-cast aluminium alloy hosing Integral LED aviation light including necessary electric connection and testing complete all as specified and directed. Make :- Bajaj cat part no. BGAV 302LED or equivalent as approved.

S&F in replacement for Sheet metal enclosure, factory made suitable for DB's 240 Volts single pole and neutral 2 Ways with 200 Amps without bus bar, complete all as specified and directed.

S&F in replacement MCB single pole & neutral 240 volts 20 to 40Amps complete all as specified and directed.

S&F in replacement weather proof PVC flat twin core aluminium conductor cable of size 10 sqmm 2 core complete all as specified and directed.

S&F in replacement 25 mm bore rigid non-metalic PVC conduit ISI marked medium grade exclusive of boxes (junction/terminal boxes) but inclusive all fittings such as tees, bends, elbows, reducers, bell mouth tube ends, fixing accessories such as couplers, lock nuts, saddles, pipe hootks etc (for telephone wiring) complete all as specified and directed.

M&L for preparation old painted steel surface and painting with one coat of synthetic enamel paint to sluice valve, NRV and suction and delivery pipe line (of any size/capacity, length n exc 5 meter) as per the existing colour code (blue/black) complete all as specified and directed.

M&L for overhauling and repair of multistage VT pump of any make/capacity by disconnecting electrical/ mechanical connection, taking out pump from existing bore well approx depth varying from 45 mtr to 80 mtr with all accessories such as column pipe, top/line shaft, bushes, spiders and bowl assembly, transporting to workshop to carry out repair work, replacement of minor unserviceable components/spares like nuts, bolts, washer & suitable size the like with new, reassemble all the parts/portions (as elaborated under "supply only" items hereafter), refix at same location, position, re-lowering in same bore well, re-connection, re-commissioning and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. Note : 1. Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only.

Supply only 30mm bore stainless steel top shaft in multiple length each not exceeding 3m as per sample.

Supply only 25mm bore stainless steel top shaft in multiple length each not exceeding 3m as per sample.

Supply only 30mm bore stainless steel line shaft threaded on both ends in multiple length each not exceeding 3m as per sample.

Supply only 25mm bore stainless steel line shaft threaded on both ends in multiple length each not exceeding 3m as per sample.

Supply only 30mm bore stainless steel line shaft coupling as per sample.

Supply only 25mm bore stainless steel line shaft coupling as per sample.

Supply only 30mm bore stainless steel line shaft sleeve as per sample.

Supply only 25mm bore stainless steel line shaft sleeve as per sample.

Supply only 150mm bore, 150mm long heavy duty MS socket fully threaded as per sample.

Supply only 100mm bore, 150mm long heavy duty MS socket fully threaded as per sample.

Supply only gun metal bearing retainer of size 150mmx30mm as per sample.

Supply only gun metal bearing retainer of size 100mmx25mm as per sample.

Supply only 30mm bore bearing retainer synthetic rubber bush of size 150mm as per sample.

Supply only 25mm bore bearing retainer synthetic rubber bush of size 100mm as per sample. .

Supply only gun matel split type gland including 02 Nos studs suitable for 25 to 38 mm bore pump shaft including provision of gland packing as per sample.

Supply only gun metal plated stuffing box bush suitable for 25 to 38mm bore shafts as per sample. .

Cutting worn out portion of stainless steel top/line shaft of 25 to 30mm bore including threading on plain surface to match with existing threading of coupling etc complete all as specified and directed.

Supply only gun metal impeller suitable for 150mm bore bowl assembly as per sample.

Supply only gun metal impeller suitable for 100mm bore bowl assembly as per sample.

Supply only gun metal/bronze intermediate bowl case bush bearing suitable for 150mm bore bowl assembly as per sample.

Supply only gun metal/bronze intermediate bowl case bush bearing suitable for 100mm bore bowl assembly as per sample.

Supply only CI neck ring for bowl assembly of any make/type/model for suction discharge and intermediate suitable for 150mm bore bowl assembly as per sample.

Supply only CI neck ring for bowl assembly of any make/type/model for suction discharge and intermediate suitable for 100mm bore bowl assembly as per sample.

Supply only gun metal/bronze suction/discharge bowl case bush bearing of any type/make/model suitable for 150mm bore bowl assembly as per sample.

Supply only gun metal/bronze suction/discharge bowl case bush bearing of any type/make/model suitable for 100mm bore bowl assembly as per sample.

Supply only intermediate bowl case bush bearing rubber suitable for 150mm bore delivery bowl assy as per sample.

Supply only intermediate bowl case bush bearing rubber suitable for 100mm bore delivery bowl assy as per sample.

Supply only nuts bolts/washer/stud of appropriate size/type suitable for bowl assembly/column pipe/clamp.

Supply only 30mm bore stainless steel pump shaft suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m as per sample.

Supply only 38mm bore stainless steel pump shaft suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m as per sample.

Supply only intermediate/suction/discharge bowl case suitable for 150mm bore column pipe bowl assembly as per sample. .

Supply only intermediate/suction/discharge bowl case suitable for 100mm bore column pipe bowl assembly as per sample. .

Supply only rubber gasket of 100/150/200mm bore suitable for sluice valve/NRV/column pipe.

Dismantlimng all parts of 3 phase 415 volts unserviceable electric motor (VT) of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces including assembling, commissioning and testing after complete repair complete all as specified and directed. Note :- Cost of rewinding shall be measured and paid seperately under relevant item.

M&L for rewinding of 3 phase electric motor of 30/40 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, varnish , tape and including suitable size of leads from starter to terminal plate, etc complete all as specified and directed.

M&L for rewinding of 3 phase electric motor of 50 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, lathorised fibre glass, varnish , tape and including suitable size of leads from stater to terminal plate, etc complete all as specified and directed.

M&L for rewinding of 3 phase electric motor of 60 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, lathorised fibre glass, varnish , tape and including suitable size of leads from stater to terminal plate, etc complete all as specified and directed.

Supply only Top shaft nut for 3 phase electric motor of VT pump of capacity 25 to 60 HP as per sample.

Supply only terminal plate of bakelite type including nut & bolt suitable for 3 phase electric motor of VT pump of capacity 40 to 60HP as per sample.

Supply only terminal box cover suitable for 3 phase electric motor of VT pump of capacity 40 to 60HP as per sample.

Supply only ball bearing suitable for 3 phase electric motor of VT pump capacity 30 HP to 60 HP any number, any type as per sample. Make :- NBC/TATA/SKF

Supply only ball/thrust bearing suitable for 3 phase electric motor of VT pump pump capacity 40 HP to 60 HP any number, any type as per sample. Make : NBC/TATA/SKF

Supply only ratchet plate for 3 phase electric motor for VT pump suitable for 40 to 60 HP capacity as per sample.

Supply only ratchet pully for 3 phase electric motor for VT pump suitable for 40 to 60 HP capacity as per sample.

M&L for overhauling and repair of 3 Phase, 30 to 60 HP centrifugal pump set of any make by disconnecting electrical/mechanical connection, taking up motor from foundation, transporting to workshop to carry out repairs, replacement of minor unserviceable components/spares like suction/discharge nozzle, oil rings, casing wear ring, shuffing box, throttle bushing, wear rings, nuts, bolts, washer etc including necessary lathe work, welding, metaling, turning, polishing, repair of housing case of DE/NDE side, reassemble all the parts/ componants, refix at same position in alignment, reconnection, re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump complete all as specified and directed. Note: Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only.

Supply only ball bearing of DE/NDE of any type any number as per existing (as per sample ) suitable for centrifugal pump of capacity 30 HP to 40 HP. Make NBC/SKF/TATA.

All as per item 133 but for centrifugal pump 50 HP to 60 HP

Supply only high carbon steel shaft for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only heavy duty shaft sleeve with bush for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only bearing housing DE for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only bearing housing NDE for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only shaft end bushes for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only bearing housing sleeves for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only check nuts & impeller key for centrifugal pump of capacity 40HP to 60 HP as per sample.

Supply only gland packing for centrifugal pump of capacity 40HP to 60 HPas per sample .

Supply only rubber gasket set for centrifugal pump of capacity 40HP to 60 HP as per sample.

Supply only rubber seal for centrifugal pump of capacity 40HP to 60 HPas per sample

Supply only CI impeller suitable for centrifugal pump of capacity 40HP to 60 HP as per sample

Supply only bearing housing studs for centrifugal pump of capacity 40HP to 60 HP as per sample

M&L for rewinding of 3 phase electric motor of 30 to 40 HP Centrifugal pump with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, varnish and tape, etc complete all as specified and directed.

All as per item 147 but for capacity of motor 40 HP.

All as per item 147 but for capacity of motor 50 to 60 HP.

M&L for overhauling and repair of 3 Phase, submersible pump set of any make/capacity by disconnecting electrical/ mechanical connection, taking out pump from existing bore well approx depth varying from 60 mtr to 90 mtr with all accessories such as column pipe, transporting to authorized workshop to carry out repair work including replacement of minor unserviceable components/spares like nuts, bolts, washer, suitable size of gas cut for flanged colum pipe, reassemble all the parts/components, refix at same location/position, re-lowering in same bore well with all accessories, reconnecting and making connection with starter, commissioning and testing to ensure efficient and smooth functioning to obtain required discharge complete all as specified and directed. Note:Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only.

Supply only stainless steel shaft for submersible pump of capacity 20 HP to 40 HP as per sample.

Supply only gun metal impeller suitable for submersible pump of capacity 20 HP to 40 HP as per sample.

Supply only stainless sleeves for submersible pump of capacity 20 HP to 40 HP as per sample.

Supply only gun metal bush suitable for submersible pump as per sample.

Supply only rubber bush suitable for submersible pump as per sample.

Supply only CI intermediate suction/discharge case suitable for 125/100mm bore of submersible pump as per sample.

Supply only pump motor coupling of submersible pump as per sample.

Supply only thrust plate for submersible pump set of capacity 15 HP to 40 HP as per sample.

M&L for Rewinding of 3 Phase, 20 to 25 HP submersible electric motor with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, fibre glass, varnish , tape and including suitable size of leads from stater to terminal plate, etc complete all as specified and directed

All as per item 159 but for submersible electric motor of capacity 30 HP to 40 HP.

M&L for 10 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump, making connection to motor including taking out existing unservicable cable complete all as specified and directed. Make :- Finolex/Plaza/Polycab/L&T

M&L for 16 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump, making connection to motor including taking out existing unservicable cable complete all as specified and directed. Make :- Finolex/Plaza/Polycab/L&T

Cutting and removing worn out threaded portion of 100 /150 mm bore MS column pipe, making threads to required length to match with existing connecting system etc complete all as specified and directed.

Supply only 150mm bore 7mm thick MS column pipe, threaded both ends with one full threaded MS coupling in multiple length, each not exceeding 3m, including nuts, bolts and gasket complete all as specified and directed. Make : Jindal/Prakash Surya/TATA

All as per item 164 but 100mm bore

All as per item 164 but 125mm bore column pipe flanged both ends

All as per item 164 but 100mm bore 5mm thick MS column pipe flanged both ends

All as per item 164 but 80mm bore 5mm thick MS column pipe flanged both ends

Disconnecting all electric/water supply connection from the suction sweepper machine/mono block pump set of capacity 3HP to 5.5HP electric driven AC single/three phase, 230 /415 Volts of any make/model from any installation, transporting to workshop dismantling, removing the burnt out windings, cleaning the stator slots and rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing, returned from workshop and re-installation at same position including commissioning and testing complete all as specified.

Repair overhauling of suction swipper machine/mono block pump up to 2 to 5 HP by replacing worn out gland packing, gasket, bearing bushes, scraping out of pump casing, bolts, nuts, washers etc, cleaning greasing tightening of bolts, nuts incl painting with one coat of synthetic enamelled paint to pump only, re-installation incl alignment with motor, testing and all as specified and directed .

Disconnecting to all electric connections from LT panel and motor for repair to motor starter of any make/any capacities 30 HP to 60 HP, star-delta starter, automatic type suitable for submersible pumps, transportation to workshop and re-installation the same at site after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, minor spare parts such as copper wire, lubricants and transportation to workshop shall be deemed included in quoted rate.

Supply only following new spare parts required for replacement for repair of motor starter capacities 30 HP to 60 HP, star-delta starter, automatic type suitable for submersible pumps :- Contactor ML type, triple pole, capacities 40 amps to 70 amps, 415 Volts, 50Hz. Make :- L&T/ABB

Globe indicator set (RYB)

Overload relay

Single phase protection relay.

Push button having on/ off position

MO 50 - 70 / MOC 40 - 60 Spreader Link Kit

Supply and fixed MCCB 125/160 amps 3 pole 25 KA adjustable type. Make :- L&T/Indoasian/HPL/Havells

Supply and fixed MCCB 200 amps 3 pole 36 KA adjustable type. Make :- L&T/Indoasian/HPL/Havells

Supply and fixed MCCB 250 amps 4 pole 36 KA adjustable type. Make :- L&T/Indoasian/HPL/Havells

Supply and fixed MCCB 400 amps 4 pole 35 KA adjustable type. Make :- L&T/Indoasian/HPL/Havells

Development of borewell untill sand free water obtained/required yield by means of pumping by Air Compressor of minimum pressure 10 Kg/sqcm (compressor shall be arranged by contractor at his own without any extra cost) complete all as directed.

Supply, installation, commissioning and testing star delta starter suitable for 30 HP motor relay range 30 to 50 Amp, including single phase preventor fully automatic in sheet metal enclosure type AC, 3 phase, 415 volts, 50HZ including taking out old unsv starter complete all as specified and directed. Make: L&T MU-G30 / FASD cat part No96008COGO/ HAVELLS /ABB

All as per item 183 but suitable for 40 HP motor relay range 36 to 60 Amp Make: L&T MU-G40 / FASD cat part No CS90908LOTO

All as per item 183 but suitable for 50 HP motor relay range 45 to 75 Amp Make: L&T MU-G50 / FASD cat part No CS96009COJO

Supply and fix 3 phase shunt capicitor 15 KVAR for VT electric motor 3 phse, 415 volts including electric connection clamp nut and bolts complete all as specified and directed.

All as per srl item 186 but shunt capicitor 25 KVAR

Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 2,50,827.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

KULBHUSHAN AGGARWAL

Shiva Builders