REPAIRS TO CERTAIN MISC BR WORK SEWAGE CLEANING PERIODICAL SERVICES FENCING GATE FOOT PATH AT VARIOUS ASCON NODES JALIPA SIHANI BAYTU KKB SHIV DHAND AND CHOUTAN UNDER AGE BR AGE EM UNDER GE ARMY BARMER

Amount

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness ( below or above ground level) of any description and removing rubbish to out side MD land complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish to out side MD land complete all as specified and as directed.

Demolition floor hearth or wall tiling including cement mortar bedding and backing coat and removing rubbish to out side MD land complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed .

Taking down shutters of any description not exceeding 1.00 Sq.m each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

S&F 30 mm thick flush shutter, plain, framed, Ist class, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-charge.

Preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks complete all as specified and as directed.

Rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks complete all as specified and as directed.

M&L PCC 1:3:6 type C -1 using 20 mm graded stone aggregate, 75 mm thick laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified and as directed.

Rendering internally 10 mm thick in cement mortar1:6 on block / concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

Rendering externally 5 mm thick in cement mortar1:4 mixing with water proofing compound ( WPC) as per manufacturer instructions over & including 10 mm thick in cement mortar1:6 on block / concrete surfaces finished fair and even with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces of concrete, finished even and smooth without using extra cement complete all as specified and as directed.

Supply only water proofing compound

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed.

Preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Preparation newly plastered surfaces of ceiling and and applying three coat of white wash complete all as specified and as directed.

M & L coloured glazed ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

M&L non skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L joint free non skid ceramic tiles, coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as directed .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or screws J-type or cranked hook bolts including dismentling of old u/s asbestos cement, corrugated or semi-corrugated sheet complete all as specified and as directed by Engg-in-charge.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Preparation of old decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

Complete removal of existing treatment of any description on walls and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern, size 580 x 440mm white, with integral foot rest (Excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe,lime/cement concretebedding and making good to the floor to mach with existing complete all as specified and as directed. Make:- Cera Cat. No. CLOVIS S3010106 or techno commercially equivalent model of make Jaquar / M/s Hindustan Sanitary Ware, Parryware, Prayag, Jaguar, Hindware, Johnson.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), CONVENTIONAL with built in jet 520 x 360 x 390 mm, white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor and making good of floor, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making good, complete all as specified and as directed. Make:- Cera Cat. No. S1056101 for EWC and Cat. No. B1510119 Carina for Deluxe Seat Cover or techno commercially equivalent model of make Jaquar / M/s Hindustan Sanitary Ware, Parryware, Prayag, Jaguar, Hindware, Johnson.

S&F in repairs 10 ltrs capacity PVC valve less, CIENA PREMIUM with Anti Bacterial Knob syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. Make:- Cera Cat. No. B1010102 or techno commercially equivalent model of make Jaquar / M/s Hindustan Sanitary Ware, Parryware, Prayag, Jaguar, Hindware, Johnson.

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and as directed. Make:- Cera Cat. No. S2040102 CANON or techno commercially equivalent model of make Jaquar / M/s Hindustan Sanitary Ware, Parryware, Prayag, Jaguar, Hindware, Johnson.

S&F in repair, viterous china bowl urinal flat back, of size 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. Make:- Cera Cat. No. S4020103 CHRYS or techno commercially equivalent model of make Jaquar / M/s Hindustan Sanitary Ware, Parryware, Prayag, Jaguar, Hindware, Johnson.

S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repair, bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair, stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and as directed.

S&F in repair, stop valve, fancy type CP, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and as directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed .

S&F in repairs, PVC connections 300mm long, 15mm size with PTMT nuts on both ends complete all as specified and as directed.

S&F in repairs 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F 63mm bore PVC [SWR] Floor Trap with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore (SWR) PVC bends any radius complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore (SWR) PVC bends any radius complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed .

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing coping including earth wire complete all as specified and directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including PVC casing & caping on wall / roof / floor etc, ISI marked with PVC terminal box fixed with cadmium plated screws with washers for mounting of switches, sockets and fan regulators etc, with and inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch 5Amps complete all as specified and directed .

All as per Serial Item No.64.00 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per serial Item No. 64.00 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per serial Item No.64.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. through existing conduit / casing & caping with PVC terminal box fixed with cadmium plated screws with washers for mounting of switches, sockets and fan regulators etc, with and inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan / bell point controlled by one, one way switch 5Amps including taking down old conductor complete all as specified and directed .

All as per Serial Item No. 68.00 above for one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per Serial Item No. 68.00 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per serial Item No. 68.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

S&F switch piano, flush button, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed.

Switch socket outlet, multipurpose, 2 in 1, 5 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

Socket outlet 5 Amps 2-in-1, 3 pin 230V AC , complete all as specified and directed.

Switch socket outlet, multipurpose, 2 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

S&F ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 230 Volts complete all as specified and as directed.

S&F electronic fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing phenolic laminated sheet complete all as directed.

S&F MCB SP ‘C’ Curve 10KA, 6 - 32amps, 240 volt complete all as specified and directed .

S&F MCB SPN ‘C’ Curve 10KA, 6 - 32amps, 240 volt complete all as specified and directed .

S&F factory made distribution board in sheet metal enclosure in double door, SPN 4 way, with 200 Amps bus bar, 240V, made out CRCA sheet flushed in wall, IP-43 Protection, for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door, SPN 8 way, with 200 Amps bus bar, 240V for fixing MCB's complete all as specified and as directed.

M&L submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC conduit , on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

M&L submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded casing & caping copper conductor, single core cable conforming to IS 694 drawn through exising conduit and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement.

S&F LED Downlight 12W surface mounted slim panel round / square type with integrated electronic driver of operating voltage 110 to 265 volts, including connecting up and incld 11 watt CFL light fitting and incld taking down old fitting complete all as specified and as directed Make : CG Cat Part No. LCDSPLN-S-12-CDL or techno commercially equivalent model of make Bajaj / Philips / Havells / Wipro

S&F LED light fitting 9W, 2 feet long, with batten ( integrated driver), 6500K colour temp, operating voltage 110 to 265 volts, lumen output not less than 1800 lm, decorative type with all accessories internally pre wired including tube rod and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting (surface / celing mounted) complete all as specified and as directed Make : Havells Cat Part No. LUMILINEBS9WLED865SPCWH or techno commercially equivalent model of make Bajaj /Philips / CG

S&F LED light fitting 20W, 4 feet long with batten ( integrated driver), 6500K colour temp, operating voltage 110 to 265 volts, lumen output not less than 1800 lm, decorative type with all accessories internally pre wired including tube rod and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting (surface / celing mounted) complete all as specified and as directed Make : Havells Cat Part No. LUMILINEBS20WLED865SPCWH or techno commercially equivalent model of make Bajaj /Philips / CG

S&F LED light fitting 18W, 4 feet long with batten ( integrated driver), 6500K colour temp, operating voltage 110 to 265 volts, lumen output not less than 1800 lm, decorative type with all accessories internally pre wired including tube rod and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting (surface / celing mounted) complete all as specified and as directed Make : Havells Cat Part No. LUMILINEBS18WLED865SPCWH or techno commercially equivalent model of make Bajaj /Philips / CG

S&F in repairs Switch socket outlet, multipurpose, 2 in 1, 5 Amps, flush type, universal ,230 Volts controlled by one switch, incld taking down old u/s existing switch socket combination complete all as specified and as directed.

S&F in repairs Switch socket outlet, multipurpose, 2 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch incld taking down old u/s existing switch socket combinationcomplete all as specified and as directed.

S&F in repairs Switch piano, 5 Amps, flush type, single pole, incld taking down old u/s existing switch complete all as specified and as directed.

S&F in repairs LED bulb 9W of base type B22/E27 in the existing lampholders with electronic driver, CCT 6500K input voltage of 90 V to 300V, beam angle 270 degree, high power factor, elegant structure designed to dissipate heat and reflector to give soft & uniform light incld taking down old u/s existing bulb complete all as specified and as directed.

S&F in repairs LED bulb 15W of base type B22/E27 in the existing lampholders with electronic driver, CCT 6500K input voltage of 90 V to 300V, beam angle 270 degree, high power factor, elegant structure designed to dissipate heat and reflector to give soft & uniform light incld taking down old u/s existing bulb complete all as specified and as directed.

Taking down ceiling fan / wall mounting fan ,1200/1400 mm sweep from its position and transport to workshop for servicing,dismantling for servicing, rewinding the same with super enameled copper winding wire as per original pattern, including removal of bearing,bushes,condenser, connector, flaxible cord,split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing, re- assamble the same and transporting from workshop to any location and fixing to position / location as directed, connecting to electric system, testing of the ceiling fan on load two hours etc complete all as specified and as directed . Note : -(i)) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (ii) Quoted rate is deemed to be inclusive of replacement of Item such as nuts bolt washers, bearings etc .

All as per Sl item no. 93 here-in-above, but Exaust fan of sweep 230 to 300 mm

S&F in repair capacitor of rating 2.5/3.15 mfd 230 V, including taking down old one complete all as specified and as directed.

S&F in repair, electronic fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing phenolic laminated sheet including taking down old regulator complete all as directed.

M/S PRASHANT BENIWAL

National Rewinding Works

m/s jogaram sujaram