Transportation installation commissioning trial run including fabrication(including civil works)of 1,1200mm width, 1x75kW,550V,dual drive PVC belt conveyor for a length of 64mtr 23AD 9L to 22D 9L along 9L,EXTENSION of 636mtr from installed tail end

Amount

Installation, Commissioning & Trial run including necessary fabrication jobs with civil work of one 1200mm width, Ix75KW,550V Dual drive PVC Belt Conveyor fora length of 64 Mtr at 9L in RVI seam at MIC, JPC

Transportation by MUV from surface and Installation or 1200mm wide Ix75KW, 550V, Dual Drive unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Coupling, Bearing Block etc. at 9L/23D

Transportation by MUV from surface and Installation of Discharge Unit Complete with cleaner at 9L/23AD

Transportation and Installation of Loop Take-up Unit Complete, with Fencing after loading it on MUV at 9L/22D

Transportation by MUV from surface and Installation of Tail-end Unit Complete at 9L/22D.

Transportation by MUV from surface and installation of 64 meters of belt structure at site

Transportation laying and lapping of 142m of belting

Laying/placement of starter, ACBs, 1.1KV grade cable, lock out devices, audio system,Pull cord and signalling system etc.

Transportation and installation at site at underground(at 23D of 9L) of motor, gear box base frame for 9L belt conveyor at RVI seam in MIC, Jhanjra Project Colliery

Fabrication at surface of motor, gear box base frame for 9L belt conveyor at surface.

Civil foundation work of drive head, discharge, loop take up and platform for installation for 1200 mm belt conveyor discharge at 9L/23AD, drive head at 9L/23 AD,loop take up15 m behind drive head in RVI seam of MIC, JPC

Recess cutting in hard stone

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level :1:2:4 ( 1 cement : 2 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level :1:4:8 ( 1 cement : 4 coarse sand(zone III)derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Brickwork with flyash bricks 1:6 in foundation

12 mm cement plaster of mix 1:6

Loading material(Stone aggregate and sand) into MUV and loading at UG

Loading material(Cement) into MUV and loading at UG

Loading material(Bricks) into MUV and loading at UG

Extension of 9L belt conveyor for a length of 636 metre from tail end which will be installed initially at 22R/9L

Transportation and Installation of 636 mtr. of belt structure, after loading it on MUV

Transporting, laying, lapping & jointing of 1272 mtr, of belting

Transportation, installation and grouting of tail end frame for 19 times shifting (03 Hds. for one time grouting and tail end to be grouted in every shifting)

Extension of pull cord ,signalling and lock out devices.

Shortening of loop take up unit after every two time extension

Supply of Materials

M.S. Nut & Bolt (M16x40) ( taking 16 nos. in 3 mtr. and 8 nos. in one Kg)

Supply of M16 X 75 H. T. Hex. nut and bolt (Forfitting of 02 sets of F-140 Tyre Couplings)

Cost of M24 X 120 HT. Hex. nut and bolt (Forfitting of 02 sets of FGC-9 Gear Couplings)

Cost of DA Cylinder(1 Nos)

Cost of oxygen Cylinder (3 Nos)

Cost of 89 G 63-88 T/BUCKLE

Cost of tyre F-140 (2 nos)

M.S. Nut & Bolt (M16x40) ( taking 16 nos. in 3 mtr. and 8 nos. in one Kg)

Total impact of GST for the purpose of CTC

K R ENTERPRISE

F.R. ENTERPRISE