Electrification work for Diu Water Supply Scheme Premises at Offtake Point, Una

Amount

Works

Point wiring for Light/ Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ ceiling complete with 6A Modular type switch/ bell push & accessories and earth continuity of following type, erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose/ H.D. Connector as directed. with medium class Rigid PVC pipe and accessories erected flushed on wall/ ceiling complete Cat.III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ flushed on wall/ ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected. with necessary ceiling rose/ H.D. Connector as directed. with medium class Rigid PVC pipe and accessories erected flushed on wall/ ceiling complete Cat.III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling with following type accessories Cat.III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling as per pipe erected with following type of accessories. For 6A Plug and 6A switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/ mcb db board with medium class Rigid PVC pipe and accessories erected flushed on wall/ ceiling complete Cat.III

For 16A Plug and 16 Amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC/ Metallic/ Wooden box, single mounting base frame covered with textured/ metallic/ white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/ angle holder or ceiling rose or H.D. Connector as directed. with medium class Rigid PVC pipe and accessories erected flushed on wall/ ceiling complete Cat.III

Providing following type of Modular Type Accessories mounted with PVC/ metallic/ Wooden box, single mounting base frame covered with textured/ metallic/ white front plate, modules erected with necessary connections as per site situation directed by Engineer In charge. Blank Plate Single Cat.III

16 Amp. SP one way switch Cat.III

32 Amps. DP switch with Indicator Cat. III

Providing & erecting ISI marked 3 pin plug top for 15/16A, 240V.

Decorative call bell Ting-tong box type 250 volts complete erected

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in/ flushed on wall/ ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories 2 wire 1.5 Sq. mm.

2 wire 2.5 Sq. mm.

4 wire 1.5 Sq. mm.

4 wire 2.5 Sq. mm.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in/ on wall/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories 2 wire 4 Sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used) suitable for sheet steel double door (IP-43) single phase incoming and horizontal single phase outgoing 8 way

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing and erecting double pole Miniature isolator A.C. 22 duty confirms to IS 13947-3 240V 40A in existing box Cat.III

Providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on 415V A.C., 23A duty With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of following capacities 32 Amp Cat.III

Approved make Iron Clad or metal clad four pole change over switch 415V. confirming to IS of following capacity 400A Cat.III

Erection & connection charges for 400A/ 630A / 800A Change Over Switch as following Erection on New angle iron frame duly painted with red oxide.

Providing and erecting AC-3 duty 3 pole power contactor thermal over load relay (L&T/ BCH/ Siemens/ C&S/ Alstom make) For 48 to 70 Amp.

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with COPPER busbar having current density not more than 1.6 Amp./ sq.mm (Rated current/ cross section area) duly wrapped with colour insulation tape for phase sequence, three phase & neutral each suitable for following current capacity with necessary painting mounted on wall or pedestal frame of required size with necessary connections. Suitable for 63/100 Amp capacity.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/ cadmium plated nut bolts in an approved manner. 16 Sq.mm.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc. for following size of cables 2 to 4 core 16 Sq. mm

2 to 4 core 25 Sq. mm

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.

Providing and supplying in standard length ISI mark high density Polythylene H.D.P.E. Pipes suitable for portable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading unloading, convenyance to the dept. stores etc. comp. 6.0kg/cm2 (Price with GST) 50mm.

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench/ pipe of following size of cables 4 core 16 Sq. mm

4 core 25 Sq. mm

Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench/ pipe of following size of cables 3 1/2 core 300 Sq.mm (150 Sq. mm 1/2 core)

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound) -Resistivity:- 0.2 W/ meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted. For Electrical installation up to 11 KV in normal soil. Length of Pipe: 2.00 mtrs, Back filling Compound:1 no. Bag of 25 Kg.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV. 50 c/s. 1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame 200mm with 1350RPM Cat.II

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification 0.5 H.P. single phase open well motor pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with control panel Cat.II

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size 3 Core x 1.5 Sq.mm.

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to be erected as directed 1.50 Sq.mm 3 core round PVC sheathed.

Providing M-20 /1:2:4 cement concrete foundation & 70% PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. (for 7.5 & 8/8.5 mtr pole) as directed by Engineer-In-charge.

Providing and fixing pole base cover fabricated from 16 SWG M.S. sheet having adequate size to cover pole base and having bend as per curvature of pole base, making the holes to fix the cover to bolt at one. end and other end shall be welded by the hinges fabricated from M.S. strip as per sample both the hinges shall be welded on M.S. strip which shall be drilled to fix on pole base. the complete assembly shall be fixed on pole base by drilling holes on pole base and painting, by one coat of Red oxide and two coats of aluminium paint as directed by Engineer-in-charge.

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approved paint to be erected on / in existing Foundation. The length of poles are as below. 8.5 mtr. Long Swaged Steel tubular pole Pole as per IS code 410-SP-16 with 300 X 300 X 4 mm base plate. (Approximate weight 75 Kg) For burial erection as directed by Engineer-in-charge.

Supplying and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/ require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/ 80mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 2 mtr. with suitable welded stiffener reducer and with lock nut complete painted with one coat of Red oxide/ PU base primer and two coats of Aluminium/ PU paint. Suitable for side entry fitting brackets of following nos of arms. Single Arm bracket 2 Mtr.

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 5way (3P+N+E), DIN rail for mounting mob & hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box. 300mm x 200mm x 100mm [deep] As directed by Engineer-in-charge.

“B” class Galvanised iron pipe having smooth finished bore of the pipe on both ends erected nuts and bolts along the pole/ wall shaping the pipe as per site requirement. Pipe dia as following 40mm dia.

Supplying and erecting Street light pole bracket comprising main “B” Class MS pipe of 4.2 cm/ require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms. length and suitable for 76.5mm/ 80mm/ require size of pole top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length with 110 deg. with vertical plane and suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide/ PU base primer and two coats of Aluminium/ PU paint. paint with following nos of arms. Single Arm bracket 0.5 Mtr.

Supplying LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable LAMP holder 5 to 8 watts Cat. III

Supplying, Installation, Testing & Commissioning of 20W IP20 Linear LED T8 tubular lamp with extruded aluminium body, PC diffuser and inbuilt driver (CW/WW) make: Crompton /Philips/ Bajaj or equivalent as directed by Engineer-In-charge. (incl. GST)

Supplying, Installation, Testing & Commissioning of Batten for LED tube light fixture 1x40w make: Crompton/ Philips/ Bajaj or equivalent as directed by Engineer-In-charge. (incl. GST)

Supplying, Installation, Testing & Commissioning of 10W LED (Bulk Head type design) (CW/WW) make: Crompton/ Philips/ Bajaj or equivalent as directed by Engineer-In-charge. (incl. GST)

Providing & fixing of PVC Meter Box Single phase approved make and as per design of Electricity Department 0.30mt. X 0.30mt. Sintex or equivalent as directed by Engineer-In-charge. (incl. GST)

Providing, erecting, and fixing of 3 phase 6 Way LT Service Pillar having IP33-Double door with Provision of Incomer 3 Pole 400A 50KA MCCB rating, Rated Voltage: 415V, etc. IK 09 rating recessed/ surface mounting heavy duty Vertical type sheet steel 1.6mm thick Distribution board for electrical Works ISI marked conforming to IS-13032 & IS-8623/ conforming to IEC61439-3 with provision of incomer suitable for MCCB and SP/ TPMC outgoing, phosphatised, power painted complete with insulated suitable rating copper bus bar, neutral link, earth link and din bar, masking sheet, including making internal DB terminations with copper lugs and with detachable gland plate, testing, etc. as required complete in all respect, as approved, specified & directed by the Engineer-in-charge. (make: L&T, C&S, Siemens, MDS). (incl. GST)

TECHNO ELECTRICALS (BID ID -8189)