SPL REAPIRS OF FURNITURE AGAINST BER AT BSO W COLABA UNDER GE W COLABA MUMBAI

Amount

PEG TABLE DRG NO :FD-384 All as shown on drg. Overall size shall be 450 mm long, 300 mm wide and 380 mm high. Legs shall be of teak wood of section 30 mm x 50 mm. The legs shall be 362 mm high, 5 mm x 5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. Two numbers top rails on section 20 mm x 40mm of teak wood shall be provided connecting legs. The length of top rails shall be 380 mm. Two numbers bottom rails of section 20 mm x 40mm of teak wood shall be provided connecting legs in short sides. Bottom rails shall be fixed at 100 mm from the bottom of legs. Top shall be of 18 mm thick Pre-laminated MDF Board. 4mm thick teak wood edging shall be provided al-round the top edge of table. All wood surfaces exposed to view when placed in position shall be Melamine polished with high gloss finish. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asian/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

STOOL DRRESSING DRG NO : FD/E6/MAP/14 (a) Stool Dressing with cushion MAP shall be made to the shape, size and design as shown on drg. (b) The seat/ back shall be made out of 75mm thick polyurethane foam with 40 density (Make: Sleep well (Primo cool)/ Godrej pasted with adhesive on 12mm thick BWP Grade plywood covered with tapestry cloth sample held in BSO Yard (Colour and shade to be be approved by GE) of cost not less than Rs 250/- per RM. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asian/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

TABLE WRITING DRG NO : FD-275 Overall size shall be 1145 mm long 600mm wide and 760mm high. All wood shall be of first class hard wood teak (MP) except top and right hand side drawer with cabinet. Legs shall be of 35mm x 55mm in section and 717mm high having 5mm x 5mm in section groove at the top of legs at the portion visible when placed in position. Top of table shall be of 18mm thick particle board with exterior grade over which 1.5mm thick plastic laminated sheet shall be fixed with fevicol. Teak wood top rails 25mm x 50mm in section shall be provided as shown on drawing. Top of table shall be fixed with 50mm long screws from underside of top rails. 4mm thick teak wood edging shall be provided at round the top edges of the table. Two short stiffeners of teak wood with 25mm x 50mm in section shall be provided between legs at 100mm from bottom of legs. One long stiffener of teak wood between short stiffeners 25mm x 50mm in section shall be provided at 100mm from bottom of legs Sides of box wich house the drawer and cabinet shall be of 18mm thick particle board exterior grade. A shelf of 18mm thick particle board exterior grade shall be fixed over teak wood bearrs of section 25mm x 20mm. Teak wood bars of section 25mm x 20mm shall be provided between drawer and cabinet towards the front of drawer and cabinet. Teak wood bearers of seciton 25mmx20mm shall be provided a bottom of drawer so that the drawer shall run smoothly over the bearers sides and back of drawer shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6mm thick plywood BWR grade. The back of box which house the drawer and cabinet shall be of 6mm thick plywood one side teak face with BWR Grade. 25mmx 20mm in section teak wood stopper shall be provided at the back of box for the drawer. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Front of drawer and shutter shall be of 18mm thck particle board with teak face on one side and other commercial 4mm thick teak wood edging shall be provided al-round the front of drawer and front of shutter of cabinet. Shutter for cabinet shall be fixed with piano typecontinuous hinges. All fitting shall be provided to drawer and shutter as per drawing. Locks shall be provided to drawer and shutter. Recessed haldle shall be fixed to bottom of legs of table with screws. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asian/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

TEAPOY DRG NO : FD-278 Overall size shall be 600mm long, 450mm wide 540mm high. The legs shall be 60mm x 30 mm in section and 497mm high and shall be of teak wood. 5mm x 5mm in seciton groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs. Bottom rails of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs, width wise at 100mm above the bottom of the legs. 25mm thick and 25mm dia hard rubber/ PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Top of table shall be of 18mm thick particle board exterior grade over which 1.5mm thick plastic laminated sheet shall be fixed. 4mm thick teak wood edging shall be provided al-round the edges of top of table. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asian/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

CHAIR EASY FD-229 All wood shall be of seasoned first class hard wood teak (MP). Legs of chair shall be of 55mm x 25mm in section at laced under side arm rest tapering to the bottom of legs to 25mm x 25mm in section. Front legs shall be joined by 50mmx25mm in section rails provided below seat frame for the suppport of frame. Rear legs shall be 55mmx25mm in section below arm rest and 25mm x 25mm in section at the bottom of legs. Rear legs shall be joined together by rear rails of 50mmx 25mm in section provided at the bottom of seat frame. Seat frame shall have rear horizontal out of section 70mm x 40mm joining the sides of frame which shall be 70mm x 40mm at the back and 25mm x 25mm in seciton near the front rails. The front rail of seat frame shall be out of 55mm x 25mm in section teak wood. The seat frame shall be of size 510mm long in front and 480mm long at rear and 575 mm deep. The top horizontal rail of back rest shall be of 55mm x 40mm and shall be 50mmx20mm. The bottom horizontal frame of back rest shall be 55mm x 20mm mm in section. The sides of back rest frame shall join the seat of chair and shall be out of 70mm x 25mm made to shape as shown drawing. The arm rests out of 65mm x 25mm in section and 610mm long shall be provided. Seat and back shall be woven with plastic cane of 2mm wide 0.4mm thick Shah or Premier brand in Godrej patter. Hard rubber rings/ PVC toes shall be provided to bottom of all legs with screws. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asian/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

Description of Work / Item(s)

Amount

TABLE CENTRE DRG NO : FD-375 Overall size shall be 1200mm long, 600mm wide and 400 mm high. Legs shall be 40mm dia anodized brass legs, four in numbers in one piece. The legs shall be joined in short and long sides with two numbers 25mm dia brass pipes of wall thickness 2mmm. The top pipe shall be fixe at 150mm from top and the lower pipe shall be at 100 from bottom of top pipe. The brass frame shall be 900mm long and 450mm wide. Vacuum rubbers shoes shall be provided at top of legs, which shall be closed with brass sheet of 1.6mm thick sheet. The bottom of legs shall have PVC shoes. The top shall be of 10mm thick plate tinted glass (white colour) with corners rounded . The edges of top of table shall be rounded off All as shown on drawing.

TABLE 900 x 600MM W/O DRAWER STEEL DRG NO : FD-1007 Overall size shall be 900mm x 600mm x 760mm. Steel frame shall be of 800mm x 500mm x 742mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.60mm. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.60mm top rails on long and short sides. Two short stifferners joining legs in short sides at 100mm from bottom shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.60mm at 100mm from bottom of legs. Top of table shall be of 18mm thick pre-laminated MDF board with teak wood edging al-round the top of table. The edges of the top fixed with headless nails and adhesive, irrespective of what is shown and specified in drawing. PVC/ hard rubber toes shall be provided to the bottom of legs. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation of surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac).

TABLE BED SIDE DRG NO : FD/E6/MAP/15 DESCRIPTION: The overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. Front, two sides and top shall be made up of 18mm thick marine ply of Make : Century/ Green Ply/ Archid Ply with both side laminated sheet of Make : Century/ Green Ply/ Archid Plyof approved shade as directed by Engg-in-Charge/GE. The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood of Make: Archid Ply/ Green Ply/Century Ply duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood of Make: Archid Ply/ Green Ply/ Cenury Ply irrespective of what is shown on drg. The drawers shall be made functional on telescopic Channel of Make: Hettich/Kaff/Godrej fixed inside the drawer .The drawers of the tables shall be provided with decorative stainless steel handles as per sample approved by GE .Rest all as per drg. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac).

CHAIR VARANDAH DRG NO : FD-359 Dimension :- Overall size shall be 460 x 600 x 760mm Description:-The legs on both sides of chair shall be of 20mm Dia mild Steel conduit of thickness as 1.6mm Make pipe shall be TATA/ JINDAL/SAIL/IISCO. The width at bottom of legs in sides shall be 600mm and at seat portion the width shall be 405mm. Canning shall be done with 4mm wide Nylon cane in mat pattern or as directed. Make of Cane : Shah/Premier/Ajoy/Garware/Maharastra Plastic Cane Industry. by Engr-In-Charge. All steel surface shall be pretreated with epoxy powder coated by 07 tank process and oven dried with following specifications Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). :- (a) Dry film thickness more than 45 microns. (b) Salt spray test to withstand more than 1000 hrs. (c) Adhension as per DN 53152 standards (d) Pencil scratch hardness more than 2H. Colour and tint of coating shall be approved by GE NOTE : Test certificates of powder coating is to be submitted. Rest all as shown on drawing.

SHIV ENTERPRISE (BID ID -3361597)

SHUBH ASHISH ENTERPRISES (BID ID -3362585)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3360480)

swastik industries (BID ID -3361740)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3360480)

Bidder Name

SHUBH ASHISH ENTERPRISES