CONSTRUCTION OF CLEANING GRADING UNIT SHED 9.44 X13.54 SQ METER

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Providing and Fixing - Turbo ventilator 24

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Making trenchof suitablewidthanddepth inhard murum / tar roadfor laying provided LT cable up to and including 16 sq.mm. complete as per specification no.CW-EXNCTR

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including16 sq.mm complete as per specification no.CW-EXN

Supplying & erecting mains PVC unarmoured cable1100 Volt grade ISl mark 3 core / 2.5 sq.mm. stranded/solidcoppercompleteerectedonwallwith duly painted G. I.Saddle

Supplying&erectingweatherpraof powder coated distribution board 4 way with 2 X 6/10Amp S.P.M.C.B with industrial two pin plug socket 10 A and 3 pin plug top10Awith topcover necessary

Providing point wiring for street light with PVC unarmoured cable1100 Volt grade ISI mark 3 core 1.5 sq mm stranded /solid copper erected on wall with G.I. Saddleduly painted @ 0,25 m C / Crigidly grouted in thewall with thehelpof plated screw including 4"x 4" M.S. box 2 way with epoxy painting &

Supplying and erecting street light Wall bracket made from 40 mm dia 'B' class G.Ipipe 1.2 min total length.complete as per specification no

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials,testing & recordin the results as per

Providingpipe typeearthingwith40mm. dia. G.l. pipe or 20 mm dia G.l Rod complete with all materials as per specification na EA-EP

Supplying,erecting&markingDPMCE6Ato32AC series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying,erecting&markingSPMCB6Ato32A,B series(for "lighting] in provided distribution board as per specification

Supplying and erecting GIsheet1.6mm(16SWG) to beused for fabrication of box espanelboards etc. Including cutting, bending, drilling, welding, riveting etc and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting marine plywood18/19mm thick fixed towall or onprovided panel board with necessary materials such a sscrews, wall fasteners, supports, nut bolts etc. complete

Supplying & erecting GI pipe 'A' class 25 mm dia erected for enclosing XLPE armoured cable on wall/pole as per specification no CB-CE

Supplying & erecting GI pipe "Aclass 40 mm dia, erected for enclosing XLPE armoured cable on wall/pole as per specification no CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90cm) 75 mm out side dia double wall corrugatedpipes (DWC) of HDPE for enclosing cable below ground/road surface, to

Supplying & erecting18guageM.S. Box powder coated (4"x4") 3 way for mains connection

Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 Sq.mm /2 to 4 core 10 sq mm. for XLPE armoured cable as per specification

Supplying shock proof type hand lampwith lamp holder, bulb / lamp100 Wguarded glassand 30 mtr. core PVC flexible

Point wiring for independent plug in 20mm ISImarked. HMSPVC conduit with 1.5 sq. mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per

Supplying and erecting Street light bracket made from 25 mm diaB' class GI Pipe, 0.6min length along with pole cap of 300 min length and 80mm dia duly welded with provided leads as per specification specification No: WG-PW/SW 1.00 Number 1-9-8/17 496.00 24.80 520.80 520.80 21

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC Insulated wire with 2x1.5 Sq.mm copper PVC wire in PVC casing-caping 20

Supplying & erecting main with 2X4.00 Sq.mm stranded copper PVC Insulated wire with 2 x1.5 Sq.mm copper PVC wire in PVC casing capingon mm on wall/ceiling 1.00 Rn.M. RA 161.00 8.05 169.05 169.0 23

Supplying and erecting double poleswitch surface type/ flushtype 240V,32A with indicator lamp & fuse wall/ceiling. 2.00 Rn.M. RA 192.00 9.60 201.60 403.20 24

Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240 V, 32Aon iron/GI frame as per Specification no. SW-SWR/MDP

Supplying and erecting dingdong / electronic musical type call bell with heavy duty coil suitable to

Supplying and erecting street light Wall bracket made from 25 mm.

Supplying & erecting CRCA sheet metal one way enclosures suitable for DPMCB/TPMCB/FP

Supplying erecting and marking four pole isolators only switch

Other Minerals

Sand- Fineness Modulus,silt and clay content

Aggregate/Crush material a) Carrying out water absorption b)specific gravity c) Impact Valued) Crushing Value

Cement- Cement- Standerd Consistency,fineness, , Setting Time (Initial And Final), compressive strenght, soundness

Concrete M10 Grade- Concrete cube Compressive Strength (set of 3 cubes)

Concrete M20 Grade- Mix design M20 with all tests on besic materials

Concrete M20 Grade- Concrete cube Compressive Strength (set of 3 cubes)

TMT steel bars- Steel - Tensile strength ,Yield stress, ultimate tensile stress, %elongation, weight per running meter, Bend/Rebend test.(Set of 3 Bars) upto 16 mm (set of 3 bar)

Murum plasticity Index, fild density of compacted layer, proctor test

Bricks: Crushing Value, Absorption Value, Specific gravity

ESHS Plan