REPAIR TO ROOF OF CERTAIN BLDGS AT OTHER THAN BASISTHA AREA UNDER GE GUWAHATI

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,tarfelt bituminous compound and brushing neat cement slurry with 3kg of cement per sqm complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Material and Labour for Cement concrete type B0, (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in floor, roof padding for roof surfaces finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

Material and Labour for 10 mm thick rendering in CM (1:3) mixed with liquid water proofing compound as per manufacturers instructions over RCC roof slabs for laying water proofing treatment and surface finished even and smooth complete all as specified and as directed. Note :-(WPC will be measured and paid separately)

Material and Labour for water proofing treatment to flat roofs and edges, applying 3mm thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester fabric weight not less than 150gms per Sqm over a coat of bituminous primer @ 0.3Kg/Sqm, after necessary cleaning the surfaces. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing, complete all as specified and as directed. Note : (i) Cover fillets in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregateof radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of grade 30/40 conforming to IS-73,applied @1.2 kg/sqm over a coat of bituminous primer conforming to IS-3384 appled @0.40 kg/sqm. (ii) Polymeric membrane shall be taken to a height of 45 cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The water proofing treatment shall be got carried out by authorised applicator of approved manufacturer. (iv) In case of stone masonry parapet wall etc a groove of size 25mm x 25mm (minimum) shall be made in cover fillet at the junction of roof and parapet wall / mumpty/ other vertical surfaces and polymeric membrane inserted in groove and sealed with paving bitumen. (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 100gms/sqm (vi) Contractor shall submit approved company generated 10 years warranty card at the time of submission of RAR & Final Bill (vii) The primer and membrane shall be of same manufacturer.

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Suppy and Fixing of 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugation side lap, fixed with ‘L’ or ‘J’ type hooks or cranked hook bolts and washers in roof, wallsetc. With grade of zinc coating 120 gm/sqm complete all as specified and as directed.

Suppy and Fixing of 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 gm/sqm fixed in any pattern complete all as specified and as directed.

Suppy and Fixing of 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

Suppy and Fixing of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Suppy and Fixing of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

- Ditto- but plain steel sheet as in eaves boarding with necessary fixing arrangement, protective cover for crumple joint, fixed with screws duly grouted to concrete surfaces complete all as directed.

Material and labour for preparation of RCC roof slab by removing all loose gravel, dirt, oil, grease and foreign matter and applying two coats of BTD (Benzothi Adiazole) for water proofing (high solid water based, cold applied, single component elastomeric in situ liquid membrane) @ 1 Kg/sqm by brush/roller/airless spray over a coat of primer @ BTD with water in (1:1) ratio @ 400gm/m² including taking down old APP membrane complete all as specified and directed. Note: It shall be carried out by authorised applicator of approved manufacturer. Contractor shall submit company generated warranty card at the time of submission of RAR & Final bill.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed.

Supply and Fixing of 110 mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and Fixing of 110 mm bore dia PVC (SWR) bends complete all as specified and as directed.

Disconnecting existing 500 litres tanks, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing 1000 litres tanks, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position complete all as specified and as directed.

Refixing 20 mm steel water Tubing and connections in existing position of floor, wall or ceiling complete all as specified and as directed.

Material and labour for 20 mm Tubes, 'Medium grad', galvanised, with all fitting and fixed complete to wall and ceiling or l;aid in floors including taking down old pipe complete all as specified and as directed

Taking down cement plaster from brick or stone walls, etc including raking out joints, haking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in two layers (10mm + 5mm) externally in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @200ml/50kg of cement on top layer of 5mm thick as per manufacturer’s instructions and finishing the surfaces fair and even without using extra cement complete all as specified and as directed. (Note : WPC measured and paid separately as ‘Supply only’)

Supply only liquid water proofing compound complete all as specified and as directed.

Material and labour for preparation of new surfaces of wall, Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M/S M.S. ENTERPRISE

Goswami Traders

M.G. ENTERPRISE

SHANKAR ENTERPRISE

M/s Dhani Enterprise

DEEP CONSTRUCTION

M/s JK Jangid and Company

M/S SEWAK SINGH