Loading
Loading…
Loading…
Tender Value
₹8.0 L
EMD Value
₹16,000
Closing Date
10 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
63 days
Expenditure
Capital (Works)
TENDER ELG
13 conditions · 4 needing a document upload
The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Scanned copy of valid GST (Goods & Service Tax)Registration Certificate.
The following documents should be attached with the tender ( Annexure-V (A) certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. & Scanned copy POA/Partnership deed is to be uploaded Duly filled up by the bidder
Partnership deeds, power of Attorney etc. (if any) : The tender shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of partnership concern he should submit the certified copy of the partnership deed along with the tender authorisation to sign the documents on behalf of the partnership firm. If these documents are not enclosed along with the tender document, the tender will be treated as hearing lease submitted by the individual signing the tender documents. The Railway will not consider any power of Attorney granted by the tender or any changes in the composition of the firm made subsequent to the execution of the contract. It may however recognize such power of Attorney and change after obtaining proper legal advice, the cost of which will be chargeable to the contract.(Scanned copy POA/Partnership deed is to be uploaded Duly filled up by the bidder. As per clause no. 14(e) of GCC'22, the following documents to be uploaded in terms of Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Scanned copy of valid Trade license or Propitorship Certificate.
List of the Works completed in the last three financial years giving description of work. Organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and date of payment and final value of contract should also be given. (Supportive documents/ certificates from the organization with whom worked/are working should be enclosed) (Please attach scanned copy of Annexure-I duly filled up).
List of works in hand indicating Supportive documents/certificates from the organization with whom worked/are working should be enclosed) description of work, contract value, approximate value of balance work yet to be done and date of award. (Supportive documents/certificates form the organization with whom worked/are working should be enclosed).(Please attach scanned copy of Annexure-IV duly filled up)
Option for receiving payment through Letter of Credit . (Please attach scannedcopy of ANNEXURE 1 LC & ANNEXURE 2 LC duly filled up by the firm if optedfor)
The following documents should be attached with the tender: (i)Scanned copy of Pan Card. (ii)Scanned Copy of EFTMANDATE FORM Duly filled up by the bidder(iii)Tender Document (duly digitally signed by the bidder)
Railway Officers Associated with tenderer:RAILWAY OFFICERS ASSOCIATED WITH TENDERER 1. ExRailway Officer as tenderer: Should tenderer be a retired Gazetted Officer working before his retirement on any of the Railways owned and administered by the President of India, or should the tenderer being partnership firm have as one of its partners a retired Gazetted Officer as aforesaid, or should the tenderer being an incorporated company have any such retired Officer as one of its Directors, or should the tenderer have in his employment any retired Gazetted Officer as aforesaid, full information of such person shall be submitted along with his tender in the format given in annexure-VI to this chapter of this tender document. (Authority: ACS No.3 to GCC July,2014vide Boards letter No.2014/CEI/CT/O/9/RET dt.22.01.2015)(please attach scanned copy of Annexure-VI duly filled up by the firm).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Contractor/(firm) must go through the entire tender document along with all attachment for any kind of guidance regarding execution of the job & payment there after. In case any thing is left out or not clear then they should consult the General Condition of Contract & standard Specification as attached (uploaded ).The bidders are also advised to preserve a copy of entire tender document/ (Set) for their convenience.
Electrical (General) work in connection with Harinsingh - Shifting of X-over point No. 53A/B at Dumka end and relocated beyond X-over point No. 54A/B for increasing CAL/CSR of Line No. 2 (main line).
EL-HWH-25-21-3376-R~ER
EL-HWH-25-21-3376-R
Open
Works - General
180 Days
Howrah, West Bengal
₹0
₹16,000
20 Aug 2026
20 Aug 2026
27 Aug 2026
45 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 7,98,473 | ||
| — | — | — | Above/ 43758.00 Below/P | ||
| Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum sheet thickness - 3mm ) Pole of overall length 5 M with single / double arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya ) | — | 6.00 | — | — | |
| — | — | — | Above/ 19998.00 Below/P | ||
| RCC foundation, erection and commissioning of above GI polewith construction of cement concrete muffing ( Cement : Stone :Sand = 1 : 2 : 4 ) with foundation accessories including earthingof pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection frompipe to pole by GI Strip / GI wire | — | 6.00 | — | — | |
| — | — | — | Above/ 652.00 Below/P | ||
| Dismantling / Cutting of existing pole and make goodof surface including transportation from site to stores | — | 2.00 | — | — | |
| — | — | — | Above/ 1260.00 Below/P | ||
| Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps madeof GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall( LED Street light fitting will be supplied by Railway ) | — | 5.00 | — | — | |
| — | — | — | Above/ 5880.00 Below/P | ||
| Fixing, connection and commissioning of out doorLED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement.( LED outdoor light fitting will be supplied by Railway ) | — | 30.00 | — | — | |
| — | — | — | Above/ 3800.00 Below/P | ||
| Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt poleJunction Box's porcelain fuse kit-kat / MCB to light fitting alongwith 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade forEarth Continuity Conductor ( ECC ).( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 20.00 | — | — | |
| — | — | — | Above/ 159300.00 Below/P | ||
| Laying of cable underground through 100 mm diameterHDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway ) | — | 100.00 | — | — | |
| — | — | — | Above/ 160000.00 Below/P | ||
| Trenching and laying of cable under ground by soil cutting through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway ) | — | 1000.00 | — | — | |
| — | — | — | Above/ 10800.00 Below/P | ||
| Trenching, laying under road / track through 50 mm dia GIpipe ( medium gauge ) including supply of GI pipe and commi-ssioning of cable including back filling of trench with excavatedsoil after laying of cable ( Cable will be supplied by Railway ) | — | 50.00 | — | — | |
| — | — | — | Above/ 26050.00 Below/P | ||
| Trenching, laying under road / track through 100 mm dia GIpipe ( medium gauge ) including supply of GI pipe and commi-ssioning of cable including back filling of trench with excavatedsoil after laying of cable ( Cable will be supplied by Railway ) | — | 50.00 | — | — | |
| — | — | — | Above/ 37600.00 Below/P | ||
| Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make goodof floor surface as its original condition after laying of cable( Cable will be supplied by Railway ) | — | 50.00 | — | — | |
| — | — | — | Above/ 55200.00 Below/P | ||
| Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable( Cable will be supplied by Railway ) | — | 600.00 | — | — | |
| — | — | — | Above/ 5160.00 Below/P | ||
| Drawing of cable on wall / structure with suitable sizeand shape GI clamps including supply of suitable size GI Clampand GI nut-bolts and commissioning of cable( Cable will be supplied by Railway ) | — | 120.00 | — | — | |
| — | — | — | Above/ 8630.00 Below/P | ||
| Drawing of cable through one no. 2" dia, 3.0 Mtrs. longGI pipe ( Make - Tata / Jindal / Bansal ) for protectionof cable on pole with proper GI clamps and GI nuts & boltsincluding supply of GI pipe | — | 10.00 | — | — | |
| — | — | — | Above/ 2396.00 Below/P | ||
| Supply of Junction Box made of 14 SWG GI sheet of size450 mm x 300 mm x 250 mm consisting with 2 nos. 63Aporcelain fuse units (kitkats) conforming to IS:2086 -1993complete with hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro-sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No.MISC / E / 2 / 05 including fixing, connection and commi-ssioning of above Junction Box on AT Mast with GI clampsmade of GI flat of size 40mm x 6mm with GI nuts-bolts. | — | 2.00 | — | — | |
| — | — | — | Above/ 5445.00 Below/P | ||
| Construction of concrete ( Cement : Stone : Sand = 1 : 2 : 4 )muffing on pole of size 450 mm x 450 mm x 600 mm | — | 15.00 | — | — | |
| — | — | — | Above/ 10305.00 Below/P | ||
| Supply of Junction Box made of GI sheet, complete with hinged door and lock incorporated with 4 nos. porcelain insulator, copper bar, hylam sheet for cable termination and fuse kit-kat / MCB of capacity 16A, 240V alongwith fixing on pole by suitable size and shape GI clamp / GI nut-bolt and commissioning of Junction Box | — | 15.00 | — | — | |
| — | — | — | Above/ 85223.00 Below/P | ||
| Supply of LT cubicle type indoor wall / floor mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following :a) MCCB with Microprocessor Release of breaking capacity36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication suitable for Release Range ( 25-63 ) Amp, 4 Pole - 1 no.b) MCB, 4 Pole, 32Amp, 415V, 50Hz, 10kA ( C-curve ) - 2 nos.c) MCB, 2 Pole, 10Amp, 240V, 50Hz, 10kA ( C-curve ) - 2 nos.d) Power Contactor, 3 Pole, 12A, 415V, 50Hz - 2 nos.e) Astronomical Timer Switch - 2 nos.f) Tinned Copper Busbar ( 4 Bar ) each of capacity 100 Amps., 415V, 50 Hz - 1 setg) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 1 no.h) CT of ratio 100/5A for MFM - 3 nos.i) LED indication lamp for Phases and "ON & OFF" indication for operating status of breakers - 6 nos.complete with all other accessories, internal wiring by single coreFRLS grade copper conductor cable of suitable size and 1100V grade along with fabrication work, cable glanding, socketing etc.( Make - LK(L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )( Make for Energy Meter - Secure / LK(L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec / Rishabh / C&S ) | — | 1.00 | — | — | |
| — | — | — | Above/ 4261.00 Below/P | ||
| Fixing, connection, testing and commissioning of above panelincluding all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundationor suitable wall hanging arrangement as per site condition withall associated accessories | — | 1.00 | — | — | |
| — | — | — | Above/ 25480.00 Below/P | ||
| Earthing of pole with 1 no. of 50 mm dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) with necessaryearth connection from pipe to pole by suitable GalvanizedIron ( GI ) strip. ( For details not covered in this specifications,Indian Standard Code of Practice for earthing IS : 3043 - 1987,Reaffirmed - 1996 should be followed ) | — | 20.00 | — | — | |
| — | — | — | Above/ 5474.00 Below/P | ||
| Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip.( For details not covered in this specifications, IndianStandard Code of Practice for earthing IS : 3043 - 1987,Reaffirmed - 1996 should be followed ) | — | 2.00 | — | — | |
| — | — | — | Above/ 121801.00 Below/P | ||
| Goods & Services Tax ( at present @ 18% ) | Lumpsum 121801.00 | 1.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-VA.pdf
ATTACHMENT
Advancecorrectionslipsupto11.pdf Advance Correction Slip
ATTACHMENT
3376-RClause_1.pdf
ATTACHMENT
Advancecorrectionslips.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
TenderFormandAnnexuresnew.pdf Tender form and annexure
ATTACHMENT
HTLTstandardspecification.pdf
ATTACHMENT
TenderBooklet.pdf
ATTACHMENT
TenderFormandAnnexuresnew.pdf
ATTACHMENT
Advancecorrectionslipsupto11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].