REPAIR TO FOOTPATH, WALL, FENCING, GATE AND CERTAIN OTHER MISC WORKS AT KALIMPONG MIL STN UNDER GE 867 EWS

Amount

Dismantling of posts struts (wood,steel or RCC) any section,embeded in concrete, brick work, masonry etc including taking out embeded portion and making good disturbed ground all as directed.

Dismantling fencing wire mesh any type and any descripition all as directed.

Excavating in post holes (or similar holes) in loose / soft soil each n.exc 0.50 cum, getting out, returnining, filling in ramming earth or broken rubble mixed with earth around to layers n.exc 25 cm including removal of surplus soil to a distancen.exc 50 mtr and making good surfaces all as directed.

Supply and fix mild steel angle iron for fencing posts and struts including cutting tops to shape, as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh including all necessary drilling, bolting or revetting etc and similar work like gates etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as directed.

Supply and fix mild steel bolts, 10 mm dia and 65 mm long, purpose / machine made with hexagonal head or square hed one end and crewed on other end, each screwed end to be fitted with washer and on hexagonal or square nut all as directed.

Supply only chain link MS Galvanised fencing size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh,size & type to any type of standards, rails straining bolts etc including provision of binding wire all as directed. (NOTE: Chain link fencing shall be measured and paid as separately as supply only)

Supply and fix in repairs galavanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as directed. (NOTE: Each line of wire to be measured)

Supply and fix 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking, binding cutting all as directed.

M&L for preparation of steel and iron surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed.

Demolition of concrete block walling built in Cement Mortar incl all quions, arches, pillers etc complete all as specified and directed.

M&L Precast cement concrete block masonry with solid blocks of type C-1 (1:3:6) (using 20mm graded stone aggregate) exc 10 cm in width or girth and setting in CM (1:6) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar fencing, dressed stone work and precase concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m straight or curved fly ash bricks built in cement mortar (1:6) complete all as specified and directed.

M&L for PCC (1:3:6) C2, using 40mm graded stone aggregate as in coping incl necessary form work fair finished of exposed surfaces of concrete and making good with existing surfaces complete all as specified and directed.

M&L for taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key srubbing down with water etc., complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for demolition of RCC of any description and in any position not otherwise specifically provided for including cutting of reinfocement as required to faciliate demolition complete all as specified and directed.

M&L for 35mm thick precast cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) jallies (including all moulding but excluding frame setting in cement mortar (1:4) complete all as specified and directed.

M&L for 25mm thick precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) jallies (including all moulding but excluding frame setting in cement mortar 1:4 complete all as specified and directed.

M&L for preparation of newly pastered surfaces and applying three coat of white wash on newly plastered surfaces on wall all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels, bands etc incl demolition of existing RCC and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for formwork to sides and soffits of lintels, bands etc for rough finished surfaces of concrete flat all as specified and directed by Engineer in Charge.

Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not les than 0.90 mm dia all as specified and directed.

All as per item No. 26.00 above but 8 to 10 mm dia in stirrups complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipe for weep holes, incl rubber ring joints to laid in trenches or in floors all as specified and directed.

M&L for 150mm broken stone or boulders, hand packing at back of walls as specified and directed.

Demolition and breaking up old broken, PVC (SWR), Cast Iron, Reinforced concrete pipes, SWG soil waste and vent pipe of 300 mm bore incl accessories set in cement and removing rubbish complete all as specified and directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed completed with collars and 300mm bore complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in sub base all as directed.

Material and labour for 50 mm thick plain cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in sub base all as directed.

M/L cement concrete polished coloured chequered cement concrete tiles of size 30cmX30cm X 25mm set, jointed and pointed in neat cement slurry with grey cement and pigment set jointed and pointed in neat cement slurry over 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M/L machine pressed polished precast concrete interlocking paver block conforming to IS-15658-2006 of 60mm thick, M-35 Grade of any shape or color with mixture of grey cement and pigment over and including 30mm thick sand as cushioning complete all as specified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

APARAJITA GROUP OF CONSTRUCTION (BID ID -3092509)

M/S JAYSHREE CONCERN (BID ID -3092516)

G K SUTHAR (BID ID -3092690)

GYANENDRA THAPA (BID ID -3092674)

DEEP CHANDRA JOSHI (BID ID -3092513)

RAMESH GURUNG (BID ID -3092512)

GEETA CONSTRUCTION (BID ID -3092658)