Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC 4C 1 KESHAR VIHAR NEAR NSF INTER COLLEGE BALAJI PURAM SHAHGANJ AGRA 282010 | AGRA | UTTAR PRADESH | 282010 | L1 | Accepted-AOC Lowest tender accepted | |
| 2 | L2₹25.3 L+₹3.6 L (16.5%)Rejected-Finance 1 2 NAGARIA IDGAH AGRA 282001 UP | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹28.4 L+₹6.6 L (30.4%)Rejected-Finance 439 D DEFENCE COLONY JAJMAU KANPUR 208010 | KANPUR NAGAR | UTTAR PRADESH | 208010 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹32.1 L+₹10.3 L (47.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
16 May 2022, 6:00 pmClosed
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
REPAIR TO ALL TYPE OF WOODEN FURNITURE AND RECANNING OF CHAIRS ISSUED TO OTM AND MD ACCOMMODATION UNDER GE AF ADM AREA AT AF STATION AGRA
2022_MES_520170_1
8000-1952/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
AF Station Agra
Class E
Cat d i
8 documents required · 8 mandatory
₹500
GE AF Adm Area Kheria Agra
₹50,000
Yes
10 Jun 2022
26 Apr 2022
18 May 2022
26 Apr 2022
16 May 2022
11 May 2022
26 Apr 2022 - 9 May 2022
Amount
BED WITH PLY TOP (WOODEN), DRG No. FD-246, 247 Taking out old existing unserviceable plywood top and S&F new top made of 12 mm thick (No. of ply- 07), ply wood, BWR grade, commercial type of required size in single piece made to shape & size as per drawing and fixed to bed frame with suitable size steel screws with cup washers complete all as specified & directed.
Taking out old existing unserviceable wooden long rail and S&F new long rail made out of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
Description all as per item 2.00 here-in-before but replacement of of short rail
Taking out old existing unserviceable head board frame and S&F new head board frame made out of 1st class seasoned hard wood (teak) consisting of 60 x 30 x 260 mm vertical size and 30 x 60 x 400 mm horizontal size including legs of size 400 mm long, 60 x 60 mm in section at top and 30 x 30 mm at bottom complete all as shown on drg and as directed.
All as per item No. 4 above but foot board frame consisting of 22 x 75 mm in section teak battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails shall be of size 30 x 60 mm and vertical legs above horizontal rail shall be of size 30 x 60 mm complete all as shown on drg and as directed.
Taking out old existing unserviceable wooden stiffner and S&F new stiffner of size 40 x 60 mm made out of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
Taking out old existing unserviceable plywood of head board and S&F new 4 mm thick one side teak face plywood (one side teak face and another side commercial), of size 780 x 340 mm incl 12 mm dia half round teak wood beading all round on both sides of head board complete all as specified and shown on drg.
Taking out old existing unserviceable plywood of foot board and S&F new 4 mm thick one side teak face plywood (one side teak face and another side commercial), of size 780 x 180 mm incl 12 mm dia half round teak wood beading all round on both sides of foot board complete all as specified and shown on drg.
Taking down existing bracket and S&F new bracket made out of 35 mm x 5 mm mild steel flat iron bend to right angle complete all as specified and directed.
CHAIR DINING, DRG NO. FD-228, 279 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair dining & S&F in position new rear leg made out of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture content complete all as specified and directed.
Description all as per item No 10.00 here-in-before but front leg (left or right).
Description all as per item No. 10.00 here-in-before but replacement of back rest.
Description all as per item No. 10.00 here-in-before but replacement of front rail made to shape including drilling holes at 12.50 mm C/C
Description all as per item No. 10.00 here-in-before but replacement of rear rail made to shape including drilling holes at 12.50 mm C/C
Description all as per item No. 10.00 here-in-before but replacement of side rail made to shape including drilling holes at 12.50 mm C/C
Taking down old existing unserviceable plastic cane and re-caning of chair dining with plastic cane 1.8 mm x 0.46 mm in centre and 3 mm x 0.60 mm cane in border of white or ivory colour complete all as specified and shown on drg.
CHAIR WRITING, DRG NO. FD-202, 250, 280 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair dining & S&F in position new rear leg made out of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture content complete all as specified and directed.
Description all as per item No 17.00 here-in-before but front leg (left or right).
Description all as per item No. 17.00 here-in-before but replacement of back rest.
Description all as per item No. 17.00 here-in-before but replacement of front rail made to shape including drilling holes at 12.50 mm C/C
Description all as per item No. 17.00 here-in-before but replacement of rear rail made to shape including drilling holes at 12.50 mm C/C
Description all as per item No. 17.00 here-in-before but replacement of side rail made to shape including drilling holes at 12.50 mm C/C
Description all as per item No. 17.00 here-in-before but replacement of arm rest
Taking down old existing unserviceable plastic cane and re-caning of chair writing with plastic cane 1.8 mm x 0.46 mm in centre and 3 mm x 0.60 mm cane in border of white or ivory colour complete all as specified and shown on drg.
CHAIR EASY, DRG NO. FD-203, 229 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair dining & S&F in position new rear leg made out of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture content complete all as specified and directed.
Description all as per item No 25.00 here-in-before but front leg (left or right).
Description all as per item No. 25.00 here-in-before but replacement of arm rest
Description all as per item No. 25.00 here-in-before but replacement of front frame made to shape including drilling holes at 12.50 mm C/C
Description all as per item No. 25.00 here-in-before but replacement of front/back rail
Description all as per item No. 25.00 here-in-before but replacement of side rails
Taking down old existing unserviceable plastic cane and re-caning of chair easy seat and back with plastic cane 1.8 mm x 0.46 mm in centre and 3 mm x 0.60 mm cane in border of white or ivory colour complete all as specified and shown on drg.
COMMON ITEMS FOR CHAIR DINING/ CHAIR WRITING/ CHAIR EASY Taking out old existing unserviceable wooden stiffner and S&F new stiffner made out of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
Removing old worn out shoe and S&F new hard rubber shoe of best quality 25 mm dia fixed with 30 mm long screwcomplete all as shown on drg and as directed.
BOOK CASE DRG NO. FD-237 Removing of unserviceable shutter and S&F new shutter made of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all around including hinges, lock and handle complete all as specified, directed and as shown on drg.
Taking down old unserviceable back and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size made to shape & size as per drawing, complete all as specified & directed.
HAT STAND WITH MIRROR, Drg No. FD-233 Taking down old unserviceable mirror of hat stand and S&F new mirror 5mm thick as per existing shape and size including beading complete all as specified and directed. Make : Saint Gobain/ Modi Guard / Swastik/ Atul
Taking down old unserviceable back and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size made to shape & size as per drawing, complete all as specified & directed.
Taking down old unserviceable peg of hat stand and S&F new brass peg of existing shape and size, fixed with required size brass screws complete all as specified and directed.
SIDE BOARD, Drg No. FD-241, 1112 Taking out carefully old existing broken top and S&F new top made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white all as shown on drawing, specified and directed.
Taking out carefully old existing broken side and S&F new side made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white all as shown on drawing, specified and directed.
Taking down existing back and S&F new back made of 6 mm thick commercial plywood, BWR grade fixed with screws complete all specified and as directed.
Taking out old top drawer and S&F new top drawer with base of 6 mm thick ply, sides and back made of 12 mm thick plywood both commercial type, BWR grade and front made of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white as per shape and size compelete all as specified and shown on drawing .
Taking out old drawer (other than top) and S&F new drawer(other than top) with base of 6 mm thick ply, sides and back made of 12 mm thick plywood both commercial type, BWR grade and front made of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white as per shape and size compelete all as specified and shown on drawing .
Taking out carefully old existing broken shutter and S&F new shutter made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white including hinges, handle and lock all as shown on drawing, specified and directed.
Taking out carefully old existing broken bottom and S&F new bottom made of 18 mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white complete all as shown on drawing, specified and directed. NOTE FOR ITEM NO. 39 TO 45 : TW beading 4 mm thick duly polished shall be provided to edges of prelaminated particle board wherever shown on drawing and as required at site.
Taking down old unserviceable leg frame and S&F new leg frame made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
Taking down old unserviceable legs and S&F new leg of size 45 x 45 x 125 mm tapered to 25 x 25 mm at bottom made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
Taking out old unserviceable openable hinges and S&F new openable stainless steel hinge 75 mm long all as directed.
Removing of existing unserviceable lock and S&F new brass 6 lever lock iron body with two keys suitable for side board all as specified and shown on drawing.
TABLE DINING 8 PERSONS FD-273 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
All as per item No 51 here-in-before but replacement of wooden side short rail (left / right).
All as per item No 51 here-in-before but replacement of wooden front / rear long rails .
TABLE DINING 6 PERSONS FD-273 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
All as per item No 55 here-in-before but replacement of wooden side short rail (left / right).
All as per item No 55 here-in-before but replacement of wooden front / rear long rails .
COMMON ITEMS FOR TABLE DINING 6/8 persons Taking down existing bracket and provision of Konia (Triangular wooden Bracket) of size 100 x 100 x 20 mm made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
TABLE 900MM x 600 x 760 MM WITH/ WITHOUT DRAWER Drg No. FD- 224, 283 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
All as per item No. 60 here-in-before but replacement of wooden side rail (left / right).
All as per item No. 60 here-in-before but replacement of wooden front / rear long rails .
All as per item No 60 here-in-before but replacement of side (Short/ long) stiffener.
Taking out old unserviceable drawer and S&F new drawer made of 1st class seasoned hard wood (teak) as per shape and size and provided with 6 mm thick commercial plywood n the bottom complete all as specified and shown on drawing
TABLE 900MM x 900 MM Drg No. FD- 291 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
All as per item No. 66 here-in-before but replacement of wooden side rail (left / right).
All as per item No. 66 here-in-before but replacement of wooden front / rear long rails .
All as per item No 66 here-in-before but replacement of side (Short/ long) stiffener.
TABLE 120MM x 900 MM Drg No. FD- 273 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
All as per item No. 71 here-in-before but replacement of wooden side rail (left / right).
All as per item No. 71 here-in-before but replacement of wooden front / rear long rails .
All as per item No 71 here-in-before but replacement of side (Short/ long) stiffener.
COMMON ITEMS FOR TABLES (Item No. 59 to 74) Taking down existing bracket and provision of Konia (Triangular wooden Bracket) of size 100 x 100 x 20 mm made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
TEAPOY FD-34(M), 278 & 382 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
All as per item No 77 here-in-before but replacement of side (Short/ long) stiffener.
TABLE CENTRE FD- 235, 274 Removing of unserviceable top and S&F new top of 18 mm thick pre-laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg (front/rear) made of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .
All as per item No. 80 here-in-before but replacement of bottom(Short/ long) stiffener.
TABLE WRITING/MEDIUM/STUDY, Drg No. FD-33 (M), 275 Removing of unserviceable top and S&F new top made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
Description all as per item No 83.00 here-in-before but replacement of wooden foot rest
Description all as per item No 83.00 here-in-before but replacement of wooden stiffner.
Removing of unserviceable cabinet side and S&F new side made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white complete all as specified, directed and as shown on drg.
Removing of unserviceable cabinet shutter and S&F new shutter made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading on three sides complete all as specified, directed and as shown on drg.
TABLE PEG, Drg No. FD-236, 277 Removing of unserviceable top and S&F new top made of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Taking down old unserviceable legs and S&F new leg made of 1st class seasoned hard wood (teak) as per shape and size compelete all as specified and shown on drawing .
Description all as per item No 89.00 here-in-before but replacement of wooden top rail
Description all as per item No 89.00 here-in-before but replacement of wooden bottom rail
TABLE BED SIDE FD- 248, 265 & 276 Taking down old unserviceable back and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size made to shape & size as per drawing, complete all as specified & directed.
Removing of unserviceable top and S&F new top of made of 18/19 mm thick particle board BWP, ISI marked, with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.
Removing of unserviceable shelf and S&F new shelf of made of 12 mm thick particle board BWP, ISI marked, with 4 mm thick TW beading on front side complete all as specified, directed and as shown on drg.
TABLE DRESSING GENTS WITH MIRROR, Drg No. FD-230 Taking out old drawer and S&F new drawer with base of 6 mm thick ply, sides and back made of 12 mm thick plywood both commercial type, BWR grade and front made of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white as per shape and size and providing TW beading 4 mm thick wherever required compelete all as specified and shown on drawing .
Taking down old broken mirror and S&F new looking mirror 5 mm thick all as specified and directed. Make : Saint Gobain/ Modi Guard / Swastik/ Atul
Dismantling/ taking out carefully old existing broken top of table and S&F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white and providing TW beading 4 mm thick wherever required all as shown on drawing, specified and directed.
TABLE DRESSING LADIES, Drg No. FD-251 Dismantling/ taking out carefully old existing broken top of table dressing and S&F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white and providing TW beading 4 mm thick wherever required all as shown on drawing, specified and directed.
Taking down old broken sliding glass and S&F new sliding glass 5 mm thick all as specified and directed.
Taking down old aluminium channel and S&F new aluminium channel all as specified and directed.
Replacement of back support and S&F new back support of 6mm commercial plywood, BWR grade as per shape and size compelete all as specified and shown on drawing .
Taking down old broken mirror and S&F new looking mirror 5 mm thick all as specified and directed. Make : Saint Gobain/ Modi Guard / Swastik/ Atul
Replacement of aluminium anodized knob dark brown shade, best quality and as approved fixed in Side board, Table 900 x 600 mm with drawer, Table wriding/ medium/ Study, Table dressing gents, Table dressing Ladies complete all as directed.
M&L for preparation of old wood surfaces of following furniture articles by scrapping and filling bores, holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two or more coats of french polish over a coat of wax to the derpressed surface for smooth finishing comlepete all as specified and as directed. (a) Bed Ply Top/ Bed Newar FD-246, 247
(b) Chair dining FD-228, 279
(c) Chair writing FD-202, 250, 280
(d) Chair Easy FD-203, 229
(e) Book Case FD-237
(f) Hat Stand with mirror FD-233
(g) Side Board FD-241, 1112
(h) Table dining 6/8 persons FD-273
(j) Table without drawer 900 x 600 x 760 mm FD-231, 284
(k) Table with drawer 900 x 600 x 760 mm FD-224, 283
(l) Table 900 x 900 mm FD-291
(m) Table 1200 x 900 mm FD-273
(n) Teapoy FD-278, 34, 382
(o) Table centre FD-274, 235
(p) Table writing FD-33(M), 275
(q) Peg table FD-236, 277
(r) Table bed side FD-248, 265, 276
(s) Table dresssing Gents with mirror FD-230
(t) Table dresssing ladies with mirror FD-251
M/s Laxmi Associate
Anand Construction
m/s tripurari enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .