Provision of RTU at Interlocked LC Gates (OSL) in the section of ASTE/RHA in Sealdah Division.

The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC 2022 (Form-6 of the instant tender document), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note:- Similar nature of work - "Supply, installation & Commissioning of Data Logger or RTUs. Or Any Signal Interlocking works involving EI or RRI or PI or IBS or IBH or LC gate Interlocking or Yard Modification or UFSBI or Track Circuit (AFTC or DC TC) or Axle Counter (SSDAC or MSDAC or HA-SSDAC) or Automatic Signalling."

The participant tenderers are requested to submit the following general information:- (i) The list of personnel / organization on hand and proposed to be engaged for the tendered work vide Annexure - AI. (ii) List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work vide Annexure - AII. (iii) List of works carried out in the past vide Annexure-AIII. (Note :- Certificates and testimonials regarding contracting experience for the type of job for which tender is invited along with certificates which may be an attested Certificate from the client, Audited Balance Sheet duly certified by the Chartered Accountant etc regarding contractual payments received in the past, please be submitted along with the offer). (iv) Details of work with the tenderer presently on hand vide Annexure - AIV. (v) Declaration regarding association of Railway Officers/Engineers with the tenderer vide Annexure- AV. (vi) List of court cases of the tenderer during last five years vide Annexure - AVI. (vii) List of arbitration cases of the tenderer during last five years vide Annexure - AVII. (viii) The participant tenderer should upload the tender document (1st sheet & 2nd sheet duly filled in and signed).

(i) A copy of document verification certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate mandatorily to be submitted by the bidder is enclosed as Annexure- C (Annexure-V of GCC) in the tender document. NOTE:- Non submission of a copy of certificate duly filled and signed vide Annexure-C of tender document/online submission of Annexure-V of GCC in IREPS by the bidder shall result in summarily rejection of his/their bid . (ii) Format for another document verification certificate mandatorily to be submitted/ uploaded by attorney/authorized signatory/each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be vide Annexure-D in tender document/ prescribed format available in IREPS (Annexure-VA of GCC). Note: Non submission of a copy of certificate duly filled and signed (vide Annexure- D in the tender document/Annexure-VA of GCC) by the bidder as stated in tender document/IREPS shall result in summarily rejection of his/their bid.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Make in India Policy:- Provisions of Make in India Policy 2017 issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.

The terms and conditions in details along with additional information relating to this e-Tender, the tender document uploaded herewith is to be referred.

The firm should read the various conditions to tender document attached hereto and agree to abide by the said conditions.

The provision of General Condition of Contract (G.C.C. April-2022 with upto date correction slips) for works as amended from time to time, will govern this contract and the firm should agree to abide by the Indian Railway's said standard General Conditions of Contract.

Once the tender is awarded, all the conditions of contract are to be met by the contractor and none of the conditions can be denied by the contractor later on.

The cable route marker to be kept at the interval of 30 mtr and at the location of quad cable joints as mentioned in the schedule. The cable route marker to be provided as per Technical circular no. 108. As per Technical circular no. 110, the twisting of Quad/PIJF cables to be done before termination at location boxes/CT rack/OFC room/SM Room/CT boxes. Soldering/Tinkering of armour earthing to be done. Physical separation of quad and earth wires at location boxes/CT rack/OFC room/SM room/CT boxes. The colour of the duct should be as per the Technical Circular-124-A (Modified). The colour of the duct is to be confirmed by the in-charge of the work before supply of HDPE duct. OFC cable, if any supplied from railway is to be laid with proper protection by the successful tenderer alongwith quad cable as per directive of railway official. All the technical circulars mentioned here and any other document may be collected from the Incharge of the work/office of Sr. DSTE/SDAH.

Three years guarantee shall be ensured for all supply equipments, materials & workmanship of the work from the date of completion of the work. During the guarantee period tenderer will be responsible for any repairs/replacement of any defective materials or defective installation free of cost.

For any further queries, you can mail to our official mail ID: [email protected]