CERTAIN REPAIR AND POLISHING TO WOODEN FURNITURE OF BSO, UNDER GE(MCTE) MHOW

Amount

CENTRE TABLE (DRG FD-235,274,267)

Removing unserviceable top and supply & fixing new top size 900mm x 450mm of 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour of size and shape with including 4 mm thick teak wood edging all round as shown on drawing. Make of board : Centuryply/Greenply/Action Tesa

Removing unserviceable legs and S&F new legs made of 1st class hard wood (MP) teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drawing and directed by Engr-in-charge.

All as per item NO. 1.02 above but top long rail.

All as per item NO. 1.02 above but top short rail.

All as per item NO. 1.02 above but center stiffner.

All as per item NO. 1.02 above but side stiffner.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.

Preparation of surface with sand paper after scrubbing and French polishing to table centre, with and including to the parts repaired/replaced under item No 1.02 to 1.07 , to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

PEG TABLE (DRG FD-384, 236, 277)

Removing unserviceable top and supply & fixing new top of 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour of size and shape with including 4 mm thick teak wood edging all round as shown on drawing. Make of board : Centuryply/Greenply/Action Tesa

All as per item NO. 1.02 above but leg of peg table

All as per item NO. 1.02 above but top long rail of peg table

All as per item NO. 1.02 above but top short rail of peg table.

All as per item NO. 1.02 above but side stiffner.

Preparation of surface with sand paper after scrubbing and French polishing to peg table , with and including to the parts repaired/replaced under item No 2.02 to 2.05 , to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

TABLE DINNING 6 PERSONS (DRG FD-239, 273, 376)

(b ) Removing unserviceable top and supply & fixing new top size 1500mm x 900mm, 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour of size and shape with including 4 mm thick teak wood edging all round as shown on drawing. Make of board : Centuryply/Greenply/Action Tesa

All as per item NO. 1.02 above but leg of table dining.

All as per item NO. 1.02 above but top long rail of table dining.

All as per item NO. 1.02 above but top short rail of table dining.

Provision of Konia (wooden Bracket) of size 3"x3" hard wood (MP) teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.

Preparation of surface with sand paper after scrubbing and French polishing to table dining , with and including to the parts repaired/replaced under item No 3.02 to 3.05 , to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

CHAIR DINNING (DRG MAPFD/E6/MAP/10 &FD/MAP/II/04)

Removing unserviceable fornt legs and S&F new legs made of 1st class hard wood (MP) teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drawing and directed by Engr-in-charge.

All as per item NO. 4.01 above but rear legs of chair dining .

All as per item NO. 4.01 above but side/front/rear rail of chair dining.

All as per item NO. 4.01 above but back verticle strips of chair dining

All as per item NO. 4.01 above but side sttiffener of chair dining.

All as per item NO. 4.01 above but centre stiffener of of chair dining.

All as per item NO. 4.01 above but back rest rail of chair dining.

Provision of Konia (wooden Bracket) of size 3"x3" hard wood (MP) teak wood 1" thick in between leg and side rail of the chair dining fixed with screw to provide more strength all as directed by Engr-in-Charge.

Removing unservicable seat and supply and fixing in new seat made out of 12 mm thick plywood, 75 mm thick cushion 32 density covered with leatherized rexine of approved colour and pattern complete all as specified, shown on drawing and as directed. Make of ply :- Geenply/Centuryply/Kitply and Make of cushion- Sleepwell/Feather foam Note : Leatherized rexine not less then Rs 250/- Per meter

Preparation of surface with sand paper after scrubbing and French polishing to table dining , with and including to the parts repaired/replaced under item No 4.01 to 4.08 , to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

TABLE WRITING (DRG FD-275,33)

Removing unserviceable top and supply & foxing new top 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour of size and shape with 4 mm thick teak wood edging all round as shown on drawing. Make of board : Centuryply/Greenply/Action Tesa

All as per item NO. 1.02 above but leg of table writing.

All as per item NO. 1.02 above but side stiffener of table writing.

All as per item NO. 1.02 above but centre stiffener of table writing.

(c) Removing unserviceable drawer and supply & fixing new drawer made out of 12 mm thick teak wood plank at side and 6 mm ply at bottom and back side as per existing size and pattern complete all as per drawing. Make of ply :- Geenply/Centuryply/ Kitply

(e) All as per item NO. 1.02 above but side rail of table writing.

Preparation of surface with sand paper after scrubbing and French polishing to table dining , with and including to the parts repaired/replaced under item No 5.02 to 5.06 , to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

TABLE DRESSING GENTS WITH MIRROR (DRG MAPFD/E6/MAP/16)

Removing the unserviceable mirror and supply & fix new mirror of 5 mm thick all as specified and shown on drgs. Make- Ajanta/Modi guard/Atul

Preparation of surface with sand paper after scrubbing and French polishing to table dressing gents , with and including to the parts repaired/replaced under to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

CHAIR EASY (DRG FD- 229, 17, 201)

All as per item NO. 4.01 above but front legs of chair easy

All as per item NO. 4.01 above but rear legs of chair easy

All as per item NO. 4.01 above but side rail of chair easy

All as per item NO. 4.01 above but front rail of chair easy

All as per item NO. 4.01 above but rear rail of chair easy.

All as per item NO. 4.01 above but arm rest of chair easy.

Removing the existing unserviceable/broken seat frame side rail and S & F new teak wood seat frame side rail including drilling holes @ 12.5 mm c/c complete and as directed and shown on drawings and as directed.

Removing the existing unserviceable/broken back frame side rail and S & F new teak wood back frame side rail including drilling holes @ 12.5 mm c/c complete and as directed and shown on drawings and as directed.

Taking down old cane from chair easy and re-canning with 2.5 mm wide half round newplastic cane in Godrej pattern with three stands into central holes both way (In place of two another holes) using minimum weight of cane complete all as per drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish asian /nerolac confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

SIDE BOARD (DRG FD-241,372 & 371)

Removing the existing unserviceable top and supply & fix with new top made of 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour as shown on drgs and directed by Engr-in-charge.Make of board - Centuryply/Greenply/Action Tesa.

Removing the existing unserviceable/broken sides and supply & fix new side made of 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour as shown on drgs and directed by Engr-in-charge.Make of board - Centuryply/Greenply/Action Tesa. NOTE : Each side will be measured as one unit.

Removing the existing unserviceable/broken shutter and supply & fix with new shutter made of 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour of duly providing 6mm thick TW edging alround including brass ball spring Catch as shown on drgs and as directed. NOTE : Each shutter

Removing the existing unserviceable/wooden drawer and supply & fix new drawers all as per drgs and as directed.. NOTE : Each drawer will be measured as one unit.

Removing the existing unserviceable/broken back and supply and fix new back made of 6mm thick commercial plywood as shown in drg and as directed. Make of ply :- Geenply/Centuryply/Kitply

Removing the existing unserviceable hinge and supply & fix new metal continuous piano type hinge upto full height of shutter all as specifed and shown on drgs and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish asian /nerolac confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

CHAIR WRITING (DRG FD- 250, 280)

All as per item NO. 4.01 above but front legs of chair writing

All as per item NO. 4.01 above but rear legs of chair writing

All as per item NO. 4.01 above but side rail of chair writing

All as per item NO. 4.01 above but front rail of chair writing

All as per item NO. 4.01 above but stiffner of chair writing

All as per item NO. 4.01 above but arms rest of chair writing

Taking down old cane from chairs chair writing and re-canning with 2.5 mm wide half round newplastic cane in Godrej pattern with three stands into central holes both way (In place of two another holes) using minimum weight of cane complete all as per drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of Shellac French polish confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

TABLE DRESSING LADIES (DRG FD-32, 251)

Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour with including 4 mm teak wood edging all round as shown on drgs and directed by Engr-in-charge.Make of board - Centuryply/Greenply/Action Tesa.

Removing unserviceable drawer and supply and fixing new drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed. Make of ply :- Geenply/Centuryply/Kitply

Removing existing unserviceable looking mirror and supply and fixing new 5.0mm thick looking mirror as per existing size and pattern complete all as specified, shown on drawing and as directed. Make- Ajanta/Modi guard/Atul

Removing unserviceable channel aluminum alongwith plane glass 4mm thick and supply and fixing new of channel aluminum alongwith plane glass 4mm thick as per existing size and pattern complete all as specifed, shown on drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish asian /nerolac confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

CHAIR DINNING (DRG FD-, 228, 279)

All as per item NO. 4.01 above but front legs of chair dining

All as per item NO. 4.01 above but rear legs of chair dining.

All as per item NO. 4.01 above but side/front/ rear rail of chair dining.

All as per item NO. 4.01 above but back support of chair dining.

All as per item NO. 4.01 above but side sttiffener of chair dining.

All as per item NO. 4.01 above but certre sttiffener of chair dining.

Taking down old cane from chairs chair writing and re-canning with 2.5 mm wide half round newplastic cane in Godrej pattern with three stands into central holes both way (In place of two another holes) using minimum weight of cane complete all as per drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish confirming to relavent IS to achieve glossy finish complete all as specified and directed.

Hat stand with mirror (DRG FD-233,362)

Removing existing unserviceable mirror 5.00mm thick and supply & fixing new mirror 5.00mm Thick of existing size and shape / pattern as shown on drawing including 1st class teak wood beading with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge. Make- Ajanta/Modi guard/Atul

Removing unserviceable stainless steel pegs size of 120mmx75mm with screw and supply & fixing new stainless steel pegs size of 120mmx75mm with screw and shape/ pattern as shown on drawing preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.

Removing the existing unserviceable of 18mm thick pre-laminated particle board of size 1000mmx710mm edging alround 1st class teak wood beading all as shown as per drawing.Make of board - Centuryply/Greenply/Action Tesa.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish confirming to relavent IS to achieve glossy finish complete all as specified and directed.

TEAPOY (DRG FD- 34 , 232, 278)

Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade -II both side teak colour with including 4mm thick teak wood edging all round of top shape and size as shown on drg and as directed by Engineer-in- Charge.Make of board - Centuryply/Greenply/Action Tesa.

All as per item NO. 1.02 above but leg of teapoy.

All as per item NO. 1.02 above but top long rail.

All as per item NO. 1.02 above but top short rail.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.

Preparation of surface with sand paper after scrubbing and French polishing to table centre, with and including to the parts repaired/replaced under item No 1.02 to 1.05 , to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

Table 3'x2' with drawer (DRG FD-224)

Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade - II both side teak colour with including 4mm thick teak wood edging all round of top shape and size as shown on drg and as directed by Engineer-in- Charge.Make of board - Centuryply/Greenply/Action Tesa.

All as per item NO. 1.02 above but leg of teapoy.

Removing unserviceable complete drawer and supply & fixing new complete drawer with knob made out of 12 mm thick pre-lamineted partical board exterior grade -II both side teak colour and 6 mm ply at bottom and back side as per existing size and pattern complete all as per drawing and directed by Engr-in-charge. Make of ply :- Geenply/Centuryply/Kitply

Removing unserviceable knobs, supply & fix new knobs to drawer as directed.

Removing unserviceable stiffner and supply and fixing new stiffner first class hard wood all as specifed, shown on drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish asian /nerolac confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

CHAIR DINNING LONG BACK (DRG FD-357)

Supply and Fixing in replacement of side rail of seat frame made out of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.

Supply and Fixing in replacement of supporting batten of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.

Supply and Fixing in replacement of long supporter batten of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement of seat made out of 12 mm thick plywood, 75 mm thick cushion 32 density covered with leatherized rexine of approved colour and pattern complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement of back made out of 6mm thick plywood ,50mm thick cushion 32 density covered with leatherized rexine of approved colour and pattern complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement of front leg made out of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish asian /nerolac confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

SOFA SET 5 SEATER (DRGFD-281/373)

Taking out old broken/unserviceable arm of sofa set 5 seater and supply & fixing new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete.

All as per item No. 16.01 above but broken front leg complete.

All as per item No 16.01 above but broken rear leg complete.

All as per item No. 16.01 above but broken long rail complete.

All as per item No 16.01 above but broken back rail of back pieces complete.

All as per item No 16.01 above but broken wooden battons complete.

All as per item No. 16.01 above but broken wooden bearers complete.

Preparation of surface with sand paper after scrubbing and French polishing to table dining, with and including to the parts repaired/replaced under item No 20.01 to 20.07, to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

SOFA SET 4 SEATER (DRG FD-281/373)

All as per item No. 16.01 above but broken arm complete.

All as per item No. 16.01 above but broken front leg complete.

All as per item No. 16.01 above but broken rear leg complete.

All as per item No. 16.01 above but broken bottom rail complete.

All as per item No. 16.01 above but broken back rail complete.

All as per item No. 16.01 above but broken wooden bearers complete.

Preparation of surface with sand paper after scrubbing and French polishing to table dining, with and including to the parts repaired/replaced under item No 16.01 to 16.07, to the required gloss to match with the existing complete all as specified and directed by Engr-in-charge.

Matress cover

Removing of unserviceable/torn mattress cold cover with zipper/chain cotton coir and supply and fixing new mattress cold cover with cotton coir of size 1800 x 900 x 100 mm duly stitching as per size and tepestry cloth shade & colour as approved complete all as directed by Engineer - in-Charge and GE. The rate of tapestry cloth shall not be less then Rs 300/- per meter.

Pillows cover

Removing of unserviceable/torn pillows cover and supply & fixing new pillows cover duly stitching as per size and tepestry cloth shade & colour as approved complete all as directed by Engineer - in-Charge and GE.

TABLE BED SIDE (DRG FD-260, 240, 276)

Removing the existing unserviceable top and supply & fix with new top made of 12mm thick pre-laminated particle board all as shown on drgs and as directed.

Removing the existing unserviceable leg frame and supply & fix with new leg frame made of 1st class teak wood all as shown in drawing and as directed.

Removing the existing unserviceable/broken sides and supply & fix new sides made of 12mm thick pre-laminated particle board all as shown in drawing and as directed.NOTE : Each side will be measured as one unit.

Removing the existing unserviceable/broken back and supply and fix new back made of 6mm thick commercial plywood as shown in drg and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of French polish asian /nerolac confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

TABLE DRESSING GENTS WITH MIRROR (DRG FD-230, 31, 379)

Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed.Make of ply :- Geenply/Centuryply/Kitply

Removing unserviceable mirror with frame and Supply and fixing in replacement 5.5mm thick looking mirror Make - Modi Guard with frame as per existing size and pattern complete all as specified, shown on drawing and as directed.

M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste smoothen dry surface by rubbing with sand paper & finally applying one or more coat of Shellac French polish confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.

M/S chandra enterprises