Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC VILLAGE DUMERKHA KALAN POST OFFICE DUMERKHA KALAN TEHSIL UCHANA DISTRICT JIND 126115 HARYANA | DUMERKHA KALAN | JIND | HARYANA | 126115 | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.0 LSame as L1Rejected-AOC HOUSE NO 1310 SECTOR 4 URBAN ESTATE GURUGRAM 122001 | GURUGRAM | HARYANA | 122001 | L2 | Rejected-AOC L2 | |
| 3 | L3₹25.9 L+₹1.9 L (7.88%)Rejected-AOC PLOT NO 172 22 GALI NO 09 GANDHI NAGAR GURGAON 122001 | GURGAON | GURUGRAM | HARYANA | 122001 | L3 | Rejected-AOC L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical B 85 1 NEAR SECTOR 4 BLOCK B SURYA VIHAR GURUGRAM HARYANA 122001 | GURUGRAM | GURUGRAM | HARYANA | 122001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹23.1 L
EMD Value
₹46,150
Closing Date
19 Nov 2021, 5:00 pmClosed
Parveen Kumar
Sector-34, Gurugram.
Providing and Fiixng of 2 Nos of High Mast and Decorative Park light in village Sarhaul and sector-17, ward No-5, under the limit of Municipal Corporation Gurugram.
2021_HRY_195576_1
EE-EEELCT.2/MCG/2021/35939
Open Tender
Electrical Works
Works
90 days
Providing and Fiixng of 2 Nos of High Mast and Dec
Providing and Fiixng of 2 Nos of High Mast and Decorative Park light in village Sarhaul and sector-17, ward No-5, under the limit of Municipal Corporation Gurugram.
2 documents required · 2 mandatory
₹1,000
₹46,150
2 Jun 2022
12 Nov 2021
20 Nov 2021
12 Nov 2021
19 Nov 2021
12 Nov 2021
Amount
Providing and Fiixng of 2 Nos of High Mast and Decorative Park light in village Sarhaul and sector-17, ward No-5, under the limit of Municipal Corporation Gurugram.
Supply, Erection, testing and commissioning of 3 phase automatic timer AMSON's make on/off the street lights on different fixed timing maintainable on street lights pedestal, pillar, wall M.S pedestal where on\off point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection on/off from bottom of the cabinet, 3 contractor 32 Amp, 24 volts D.C each transformer, rectifier system, switching system, bakelite contractor 32 Amp, MCB 32 Amp L&T digital timer Auto/Manual system, time setter, fibber sheet, rubber and plastic component, wiring and component fitting, chemical (Epoxy) including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.--(EEE)
Providing trench less cutting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road crossing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.
Casting and Laying of making of foundation 1:1.5:3 for foundation of size 0.4 m x 0.4 m x 1 m minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4 nos 8 mm dia for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work
Supply, Installation Testing and commissioning of 12.5M. long High Mast of make Philips/ G. E. India/Vipin S.T. pole/ Valmont/ Crompton/Surya Roshni High Mast Manufactured from B.S.E.N. 10025 or equivalent grade material in two sections hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 part 3 suitable for 6 Nos. luminaries loading fully motorized (power tool) with starter and cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect up to entire satisfaction of Engineer-in-Charge. (i) Thickness of top section = 3mm ( minimum) Bottom section = 3 mm(minimum) (ii) Top dia = 150mm Bottom dia= 360mm (iii) Thickness of Galvanized Top = 65 micron (min) Bottom = 85 micron (min.)
Supply and Erection of 150/160 Watt LED Flood Light (IP66) with lens 120 lux 3000K Light fixture is painted with multiple coats of weather resistant Polyurethane paint min and including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make Philips, Bajaj, Crompton, Helonix.
Supply and erection of under ground Armoured cable loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 2 Core Cable .
Restoring the road cut, in level with the existing road surface, including preparation of subgrade laying and relaying of soiling and laying and consolidation of wearing coats to water bound macadam specification and laying 20mm thick premix carpet, on top including cost of tack and sealcoat complete in all respects.
Providing trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work.
Supply and Erection of Decorative Pole of GI Pipe Section of 3Mtr long with lower section 1Mtr Long -114mm Outer Dia, Upper section 2Mtr long -60mm outer dia. The pole shall be provided with 340mm dia and 45mm height of base arrangement at bottom. The pole shall have service window of size 130mm (W) x 300mm (H) comprising 4 way connectors of 60Amp and 1 MCB of 6Amp including internal wiring in pole with 1.5 mm 2 core PVC insluated copper wire. Diecasted Decorative casting is provided at the joint of Pole. Pole is painted with multiple coats of weather resistant Polyurethane paint having minimum coating thickness 85microns with approved color with all labour & material required including suitable foundation bolts with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. GL-PL-Flox -MS -03M -60 . Make Glowmac or equivalent, Crompton, Philips,
Supply and erection of 40Watt LED Decorative Post Top Fixture(IP65) made with corrosion resistant Die Cast Aluminium, height of Light Fixture is 425mm with hat of Dia 550mm with die cast base of dia 60mm, rubber gaskets are provided at appropriate location for water resistant(IP65). 4 no of pipe support to Opal Diffuser and canopy Opal Diffuser is made of unbreakable PC material. Led to be mounted on vertical square aluminium exclusion top to bottom height on diffuser. Light fixture is painted with multiple coats of weather resistant Polyurethane paint min. 85 microns including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make Glowmac GL-PT ASTOR or equivalent, Crompton, Philips.
Casting, Laying and covering of Gap Base plate (Pole) between foundation suitable c.c. mixture and pole marking with yellow reflector stricker with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work
Supply and erection of under ground Armoured cable loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 4 Core Cable.
Bidder Name
Amount
Bharat Pumps and Projects(GSTN-06AAFFB8981N1ZT)
DHEERAJ ENTERPRISES(GSTN-06AAKFD3784C1ZI)
Fortune Enterprises(GSTN-NA)
Fortune Enterprises
Bharat Pumps and Projects
Fortune Enterprises
Bharat Pumps and Projects
Bidder Name
Bharat Pumps and Projects
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .