Repairs /replacement to joinery, false ceiling, wall panneling, cup-board, mosquito proofing, kitchen platform, aluminium door, window and other misc works to OTM/Md accn at CQA(V) and DAD complex under GE(S) Ahmednagar

Amount

Taking down shutters of any description n. exc 1.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n. exc 2 sq.m. each complete all as specified and directed.

Taking down shutters of any description exc 2.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) exc 1.50 sqm but not exc 4 sqm each and removing from and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

2nd class hard wood, plain, solid, straight chowkats and frames ,wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

2nd class hard wood plain fillets square, rectanular in section clean sawn, securred with nails of sectional area exc 3 Sqcm but nexc 6 Sqcm complete all as specified and directed.

2nd class hard wood plain fillets square, rectangular, sectinal area exc 6 & n exc 13 sq cm, wrought, bullnosed, splayed, chamfered or rounded on one edge or face, secured with nails etc complete all as specified and directed.

2nd class hard wood plain fillets square, rectangular, sectinal area exc 13 & n exc 25 sq cm, wrought, bullnosed, splayed, chamfered or rounded on one edge or face, secured with nails etc complete all as specified and directed.

All as per serial item no.08 here-in-before but except fillets.

Factory made, plain framed, panelled shutter (two panel), 35 mm thick,with 2nd class hard wood with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003(Part I), Kiln seasoned and chemically pressure treated, fitted to chowkhats complete all as specified and directed.

Glazed and skelton shutters 35 mm thick in 2nd class hard wood, open rebated and prepared to receive glass, gauze etc without sash bars, edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt-I sections 8 and clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

2nd class Hard wood, Glazed and skelton shutters 35 mm thick for window in open rebated and prepared to receive glass, gauze etc without sash bars, edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt-I sections 8 and clause 8.24 (b) supplied and fitted to chowkats complete all as specified and directed.

Taking down wall panelling and similar work of any type complete all as specified and directed.

Taking down PVC Chowkats or frame with PVC shutters (without taking off shutters from the frame) not exc 1.50 Sqm each complete as specified and directed.

Factory made PVC solid, single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2010 Section-8, clause 8B.3 complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, including all accessories (like handle, tower bolt, sliding door bolt, hinges etc) all as specified and directed.

Galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperature 1.40 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame,fixed in repairs, complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description), from wooden/steel frames stone concrete or brick surrounds glazed putty or fixed with beads including punching or drilling out old glazing pines/spring clips complete all as specified and directed.

3 mm thick sheet glass ordinary quality & glazing with oil putty in square n.exc 0.50 sqm each pane complete all as specified and directed.

Butt hinges medium weight cold rolled mild steel 75 mm long, ISI marked, complete all as specified and directed.

Butt hinges medium weight cold rolled mild steel 100 mm long, ISI marked, complete all as specified and directed.

Continuous (Piano) hinges, stainless steel, bright finish or electro galvanized of 40 mm width of flaps (when opened) complete all as specified and directed.

Aluminium anodised tower bolt of extruded section of 150 mm size, fixed in repairs complete all as specified and directed.

Aluminium sliding door bolts 300 mm long, plate type , stove enamelled black , with bright bolt not less than 12 mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple,fixed complete all as specified and directed.

Aluminium handle fabricated type anodised, 150 mm size, fixed complete all as specified and directed.

300 mm long mild steel, ordinary rat tail rod pattern helical door spring including roller and roller plate ,, fixed in repairs complete all as specified and directed.

Aluminum floor door stopper with aluminium alloy body and tongue ISI Mark anodised with hard drawn steel spring fixed in floors, overall length of cover plate 150 mm, fixed in repairs complete all as specified and directed.

Aluminium anodised tower bolt of extruded section of 200 mm size, fixed in repairs complete all as specified and directed.

Hasps and staple safety type aluminium with mild steel hinge pin including bolt to hinge plate,fixed with screws, of 100 mm size, fixed in repairs complete all as specified and directed.

Taking down aluminium door /ventilator shutters with frame of any size and description, in at any location complete all as specified and diercted.

Anodised aluminium frame for doors , windows , ventilators with aluminium section size minimum 63 mm x 35 mm x 1.5 mm , with one or more rebates including joining cleat for fixing etc complete all as speccified ( Make of section: Jindal Hindalco )

Anodised aluminium glazed door, double/ single leaf , and shutter fixed with stainless steel hinges to frames by providing Ist class hard wood small pieces in side of frame at hinges portion / screws and aluminium anodised shutter with middle rail and bottom ril of size 90 mm x 40 mm x1.5 mm thick and styles of size 40x40x1.5 mm thick , aluminium tower bolts 150 mm long 2 Nos per each leaf including, 3.5mm thick sheet glass or 12 mm thick prelaminated particle board or the both) filled in panels (2 Nos)with necessary jointing cleats, glazing clips, rubber pack/ beading aluminium beading screws etc complete all as specified and directed. (Aluminium section shall be of Make: Jindal/Hindalco and Tinted Glass: Modi or Saint Gobain or Kohinoor, Prelaminated Particle Board:Kitply/Bhutan Board or equivalent). Rate quoted shall include cost of Glass and prelaminated particle board panels.

Powder coated aluminium frame and shutters for three track sliding window of standard aluminium section of make Jindal/ Hindalco or its equivalent incl necessary joints, cleats, glazing clips, rubber gasket, anodized aluminium fittings such as handles, locking arrangement, latches etc all as specified incl provision of coloured/tinted, 5.5 mm thick glass (Make of Glass Kohinoor or Modi Guard/Sant Goven in best quality) and stainless steel wire cloth of 0.30 nominal dia and average width of aperature 1.40 mm all as specified and directed by Engineer-in-Charge. Note : Aluminium sections will be as under :- For Frame Bottom : Section No 8911, 0.739 Kg/m, Top & side of frame : Section No 8689, 0.933 Kg/m, Shutter top & Bottom/sides : Section No : 8663, 0.417 Kg/m, Shutter handle : Section No 8665, 0.417 Kg/m and Shutter interlock : Section No : 8117, 0.346 Kg/m).(Two shutters shall be Glazed & one shutter shall be wire gauged complete all as specified and directed) .Rate quoted shall include cost of Glass and stainless steel wire gauge. (Aluminium section shall be of Make: Jindal/Hindalco and Tinted Glass: Modi or Saint Gobain or Kohinoor).

Double action floor spring hydrulicaly regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover , governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Aluminium (Die cast body) door closer hydraulically regulated universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Aluminium (Die cast body) door closer hydraulically regulated universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed in repairs complete all as specified and directed.

Repair to shutters of exsiting aluminium door , window , including changing glazing clips, neoprene , and make it functional all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Steel rolling shutters 1.00 mm thick laths with ball bearing as specified including top cover, anchoring rod and staple and one shop coat of primer erected in position as indicated complete push pull or manual type complete all as specified and directed

Preparation of new wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specifiedand directed.

Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed and directed.

Dismantling of wall & ceiling boards (Fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and directed.

Providing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

Interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38 mm X 25 mm X1.5 mm spaced 1200 mm c/c and cross Tee of size 25 mm X25 mm X 1.5mm ,1200 mm long spaced between the main Tee at 600 mm c/c to form a grid of 1200 mm X 600 mm and provide a secondary cross tee 25 mm X25 mm X1.4 mm (of length 600 mm) to be interlocked of the centre of 1200 mm X600 mm panel to form a grid of 600 mm X 600mm and wall angle 25 mm X25 mm X2 mm as per manufactureres instructions as reqd as per site conditions with GI level clip and level adjuster, GI wire suspenders 4mm dia fixed to roof at 1200 mm centre to centre complete all as directed including necessary fixing/ repair /replacement of existing elecrical fittings as required at site to make the functional).

Taking down old steel windows /ventilators of any size & type and making good the disturbed portion complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay complete without glazing bar with & including fixing flat iron for securing wire mesh complete all as specified and directed..

Factory made steel ventilator with top hung shutter including hinges, steel peg stays etc complete all as specified & directed.

18/19mm thick prelaminated particle board, interior grade , prelaminated on one side with decorative choice lamination & other side balancing with lamination,fixed wih screws to timber frame work complete all as specified and directed.

First class soft wood beads straight (any size ) for gauged joinery incl mitres and removing old beads after tightening & nailing of wire mesh including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge , thickness in roof covering complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or ridge, fixed with self tapping screws complete all specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 25 mm bore pipe complete all as specified and directed.

15 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

20 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

25 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

Refixing old GI steel tubing 15 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

Refixing old GI steel tubing 20 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

Refixing old GI steel tubing 25 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

500 litres capacity rotational moulded polythene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position in repairs, including connecting to inlet and outlet pipes complete all as specified and as directed.

Ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 15 mm bore iron pipe (minimum weight 142 gms), fixed in repairs complete all as specified and directed.

Ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (minimum weight 210 gm),fixed in repairs complete all as specified and directed.

Taking down carefully exising bituminous felt including cement plaster as levelling courese of any thickness and cleaning surface of roof , terrace including flushing and junction of parapets , kerbs walls , PCC Fillets , benching etc with wire brush and removing of the rubbish out side MD Land complete all as directed .

Water proofing treatment Over RCC slab by applying bitumen primer @ 0.25Kg/Sqm and laying 4 mm thick APP membrane weighing not less than 3.50Kg/Sqm , reinforced with non woven polyester core , having soften point not less than 150 degree celcius , longitudinal tensile strength not less than 650N/5cm , tearing strength of 180 N/5 cm , applied by torch application and applying a coat of solar reflective aluminium paint @ 0.11 KG /Sqm on membrane surface all as per manufacturers direction.(Note:Water proofing work shall be carried out by Autorised applicator of APP manufacturer).Ponding test shall be carried out to establish water tightness pf roof as per directed.

PCC 1:2:4, type B0,using 12.5 mm graded stone aggregate mixed with water proofing compound as per manufacturer instructions, as in concrete padding, 25 mm average thickness, laid to required slope including finishing the concrete surface fair and even complete all as specified and directed.(Water proofing compound shall be measured and paid for separately).

Supply only water proofing compound, ISI Marked, complete all as diercted.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and disposing of the rubbish complete all as specified and diercted.

Dismantling floor .hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.

Cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate,75 mm thick as in sub base of floors and pavings complete all as specified and directed.

Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 60 mm thick ,hydraulically pressed cemented tiles of grey colour with pigments,(glossy finish/ rubber mat finish) factory made, M-35 grade conforming to IS-15658-2006, as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed by Engineer-in-charge. Note Size, shape & pattern of tiles shall be as decided by Engineer-in-charge.

AMAR CONSTRUCTION

S.k ENTERPRISES

m/s shivam tools and equipment

Vinod Enterprises

PRADIPKUMAR POPATRAO THUBE

Chandrama Construction

MS. A.S. CONSTRUCTION

Ms. M.D. Auty