CONSTRUCTION OF REPAIR AND RENOVATION OF TARAVA HOSPITAL AT TARAVA UNDER AMA HOSPITAL SCHEME DURING 2025 26

Earth work in excavation of foundation in hard soil or gravelly soil within 50 m initial loead and initieal lift, including dressing and levelling the bed etc. complete

Drain+Compound Wall Supplying and filling foundation and plinth with sand wall watered and rammed with cost conveyance and royality, taxes of all materials and labour (T&P) etc. complete.

Drain+Compound Wall Cement Concrete (1:3:6) in Foundation using 4 cm size bhg metal including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

Drain+Compound Wall Cement concrete work (1:2:4) using 12 mm to 20 mm size black hard crusher broken granite stone chips of approved quality from approved quarry including hoisting,lowering , laying and compacting concrete watering and curing for 28 days including finishing the exposed surface including cost , conveyance, royalties and taxes of all the materials and cost of all labour, T&P required for the work etc. complete in all respect including 1% cess as per direction of the Engineer-in-charge.

Fly Ash Brick masonry with CM (1:6) in Foundation & Plinth including watering, curing with cost, conveyance, royalty and taxes of all materials & labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

Compound Wall Fly Ash Brick masonry with C.M. (1:6) in Superstructure using Fly Ash Bricks including watering and curing with cost, conveyance, royalty and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge.

Ground floor+First floor+Compound Wall 16 mm (5/8") thick cement plaster (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.

Ground floor+First floor+Compound Wall 12mm thick C.P. (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.

Ground floor+First floor+Compound Wall R.C.C. M-25 using 20 mm & down size b.h.g.c.b chips including watering, curing with cost, conveyance, taxes and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. A) Column Base

B) Plinth Band Column / Beam

Plinth Beam

1st Floor Lintel

First floor+Chajja

R.C.C. Shelves+Stair Case Roof Slab

Cutting, Bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

Ground Floor+First Floor+Approach road+Compound wall 6mm thick C.P. (1:4) as ceiling plaster including watering, curing, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. Finishing wall surface to weather coats I.S.I. Two coats Finishing wall surface to weather coats I.S.I. Two coats

Supplying fitting fixing MS Gate as per approved design & quality as per the direction of EIC

Supplying, fitting, fixing of Ceramic Glazed Wall tile in walls on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. Painting 2 coats over a coat of primer to iron workwith all cost complete. two coats with shell lime over a coat of white wash

Finishing wall with Weather coats of approved shade on new work two coats to give even shade including cost, conveyance, taxes with all labour and T&P required for the work etc. complete as per direction of the EIC.

Finishing wall surface with Weather Coat (I.S.I) two coats over a coat of primer with approved shade including cost of all materials and labour (T&P) etc. complete.

Providing of M.S. Door / Window / Grill gates made out of M.S. Angle, flat, sheet etc. including cost, conveyance, taxes of all materials and labour (T&P) etc. complete.

Labour for fitting, fixing of M.S. Door / Window / Grill gates with C.C. (1:2:4) including cost of all labour (T&P) etc. complete.

Providing & laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregate to water bound macadam specification including spreading in uniform thickness, hand packing , rolling with 3 wheeled steel /vibratory roller 8-10 tonnes in stages to proper grade and camber

Construction of granular sub-base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

Wall Priming one coat with any approved primer on New Plastered surface of with any approved primer including cost of primer

Removing old grading plaster from roof slab,clearing the surface,lowering and removing the debries within 50m lead

Providing and laying water proofs with polymeric bituminous mambers(Plastic felt) of 2.25kg/sqm and 2mm thickness etc complete.

Structural Steel work riveted, bolted or welded in built-up section, trusses and framed work including cutting, hoisting fixing in position and applying a primer coat of approved steel primer etc. complete.

Supplying, fitting, fixing of Bhusan colour sheets 0.50mm in roofing including drilling holes in wind ties and fixing with "J" or "L" hooks, fixing of ridges, valleys, wind ties etc. including cost, conveyance and taxes of all materials and labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-Charge.

Supplying, fitting, fixing of Bhusan colour sheets 50mm in roofing puff panel top 0.4 mm and bottom 0.3mm GI colour coated sheet use for slope roof area including drilling holes in wind ties and fixing with "J" or "L" hooks, fixing of ridges, valleys, wind ties etc. including cost, conveyance and taxes of all materials and labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-Charge.

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles ( CHEQUIRED TILES )

Providing, fitting, fixing of double skinned partition walling made out of OEL Al. Section No. 9210 as single groove as horizontal & vertical member placed at 1200 mm C/C and fixing of 9 mm thick BWR ply to both side and covered with 4 mm thick Sonear make sycamore veneer to both side with PU polishing and jointing angle no. 1855 including cost of all materials and labour etc complete excluding GST

Supplying, fitting & fixing of Storage Cabinet made out of 19 mm BWR Block Board and pested with 1 mm thick sunmica of approved shade to all sides, the front shutter is with 19 mm BWR Block Board with both side sunmica and with all fitting & fixing all exposed edge is fixed with 1 mm sunmica at all sides necessary locking arrangement with cost of all materials and labours etc complete excluding cost of GST.

Fixing tiles (Granite Tiles)in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete.

Supplying and fixing LED letter board including cost of all accessories, materials and Labors & T & P Etc complete exculding GST

Supplying and fixing Steel Site Map and signage including cost of all accessories, materials and Labors & T & P Etc complete exculding GST

Supplying and fixing Name plate including cost of all accessories, materials and Labors & T & P Etc complete exculding GST

Add for fitting fixing of Cupboard and laboratory L.S

Filling foundation & plinth with excavated earth including cost of labour, T&P etc. complete.

Hot/Cold Water Provision

Plantation, Soil Filling and Grass Turfing

Supply, Installation, Testing & Commissioning of 7 Mtr longGalvanized PU painted octagonal pole with solar pannel of 150watt / 165 watt / 12 v poly (make - luminous) with suitableangel pannel holder and bracket on top of pole with 60 wattsolar LED light (2 IN 1) battery inbuilt in light, fully concretefoundation base with stell rods of jindal, 8 SWG aluminium wirefor earthing of pole, with all other wiring material (3 core 4 sqmm flexible copper DC cable 5 mtr), MC 4 Connector, PoleThickness-3.1mm with foundation nuts and bolts and bracketof suitable for holding 1 No of 60 Watt LED DC light (2 in 1).pole Make (Bajaj or equivalent of Klite/Valmount) with 60 WLED solar DC light with(2 in 1) and battery in built. (Make:-Bajaj/Philips/panasonic)

Video Processor Y21 / USB Drive for Use Pan drive

LAN Card for the use Video Automatic processing by Internet

Audio Spikier 18 Watts & Audio Card

Frame Structure for Sign Board: Supply and Fixing of Steel Frame Structure for Supporting of LED Sign Board made out of 40x40mm, including required Fabrication, 2 cots Gray Painting Asian Paint M.S.Pipe:- 12"X12" Inch

Concrete pillar including cost of sand, cement, chips & Labors etc. 500X450X450 mm size for pedestal of complete unit of sign board. (Including labors & materials)

Installation, testing, Commissioning, Transporting, Labor charges on signboard.

Touch screen based token dispenser - upto 32 services

Token calling unit with LCD display - keys'PREV' and 'NEXT', one CALL'key, one 'RETAIN' key and a 'CLOSE' key

Token hub- 20 ports for Conneting All Devices.

Tolen display unit- single line ; 6 digits; 4 digit for token no, 2 digits for counter no

TV interface unit (model name : LAN_TV_MBD)

32 inch LCD screen for waiting hall

HDMI cable 2 metres

Supply of D-Link CAT6 cable and PVC conduit

Installation testing and commissioning

Supply, Installation, Testing & Commissioning of 55 INCH (139 ml ultra HD (4K) LED smart TV, with launch year must be 2023 inbuilt speaker of minium 40 watt, inbuilt storage memory of minium 8 GB, support ios, android, inbuilt wifi, bluetooth connection port for external USB drive (Make:-SONY /LG/ SAMSUNG)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 16Amp socket outlet and 16Amp Modular switches connection (Make of Modular Switch- Schineider cripsal x panasonic europa/Legrand myrius / L&T englaze or eq or eq)

Supply and fixing of modular 6Amp plug with 6Amp switch on existing board (Make of Modular Switch- Schineider cripsal x panasonic europa/Legrand myrius /L&T englaze or eq

Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire- Finolex /L&T / Havells / polycab) 2x4.0 sq.mm + 1 x 1.5 sq.mm

Electrical Wiring to light/ Fan/Call bell/ Exhaust fan (1.5 + 1.5 Earth) Modular Type (Gr.A) (1.1.1)

-do- (Gr.B) (1.1.2)

-do- (Gr.C) (1.1.3)

S/F of M.S. Box for 2 Module 18 swg (1.24.2)

S/F of M.S. Box for 4 Module 18 swg (1.24.3)

S/F of M.S. Box for 6 Module 18 swg (1.24.4)

S/F of M.S. Box for 8 Module 18 swg (1.24.5)

S/F of 5 amp switch and 5A. Socket outlet of ISI marked on existing board (1.25.1 + 1.25.4)(Modular Type)

S/F of 15/16A. F.T. Power Plug & Socket (Modular type) (1.2.7)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.4)

Supply, Installation and commissioning of63 Amp. I.C.D.P. Main Switches (Sl.No. 1502) (IS 13940 Part 3/ 1993) on existing surface complete with H.R.C. fuse links, interconnections, earthing etc. as requiredas per direction of Engineer in- charge (Make Siemens/ HPL/Anchor/L&T/ Havels/ C&S/ R,K,) 2.15.1A

Supply of250 mm x 300 mm x100 mm deep(1.24.13) for fixing 63 Amp ICDP Main Switch.

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of following 4 way single pole and neutral sheet steel MCB 250 V on recessed complete with tinned coper bus bar , neutral bar, earth bar,din bar, detachable gland plate, inter connections, phospatized and powder painted including earthing etc. as required(but without MCB)4 way double door(2.3.5)

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

Earthing with G.I. earthpipe 3 mtr long. including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.2 +3.3)

Supply andlaying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of 4 sqmm S/C wire ISI marked with No.10 G.I. wire duly clipped

Invertor wiring (1x 1.5 sqmm) copper wire (1.19.1)

S/F fo 48" A.C.Cilling fan without regulator including all conections (Model:Havells (Velocity/Spark)/ Usha (Striker Millenium)/ Crompton (Jura)/ Orient (Summer Pride)/ Polycab (Vital)/ Anchor-XL Turbo)

S/F of electronic step type ceiling fan regulator in existing switch board including connection with1.5sqmm FR PVC(1.25*)

S/F of Fan Hook (M-22)

S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton/ HPL/ Havells / Polycab

Supply of instalation, Testing commissioning of 15 Watt. LED bulb

S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required .(1.30)

Supply of 180 mm x 100 mm x 60mm deep (1.24.5) for fixing call bell

S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator

S/F of 2000 VA Inverter with 2 nos. 150 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous)

S/F of 60 watt. Energy efficient LED street light fittingss. (Make- Crompton/Phillips/ HPL/ Havells/ Poly cab

S/F of 2 Ton 5 star Inverter type split A.C. M/C with 5 KVA Voltage Stabilizer (Make - Microtek, V-Guard) with all accessories and connections (Make - HITACHI- R410A-RSOS518HCEPA/ Bluestar- IC524 DATU/ Carrier - Durafresh- Neo-X))

Supply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard)

External Electrical Work

Water Purifier

Please Enable Macros to View BoQ information