Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹19.4 L+₹1.3 L (6.99%)Rejected-Finance C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L2 | Rejected-Finance OTHER THAN L1 RATE | |
| 3 | L3₹19.8 L+₹1.7 L (9.25%)Rejected-Finance HOUSE NO 54 PUBERUN PATH HATIGAON GUWAHATI 781038 KAMRUP M ASSAM | KAMRUP METRO | ASSAM | 781038 | L3 | Rejected-Finance OTHER THAN L1 RATE |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
REPAIRS TO LEAKAGE SEEPAGE AND MISC REPAIRS IN ZONE II, IVA, IVB AND VI AT LEKHAPANI
2023_MES_625603_1
8766/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E Category a (I)
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹40,000
Yes
19 Dec 2023
30 Oct 2023
4 Dec 2023
30 Oct 2023
27 Nov 2023
13 Nov 2023
Amount
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed. by Engineer-in-Charge.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Demolition of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and removing debris beyond the premises,complete all as specified and directed by Eng-in-charge.
M&L for false ceiling with GI frame work for EXPOSED GRID SYSTEM of grid size 600 mm x 600 mm, GI powder coating at bottom and comprising of GI perimeter wall angle with two equal flanges of 25 mm fixed to surrounding wall / partition using nylon sleeves and screws at 450 mm centre to centre. Main Tee 0.55 mm thick having 35 mm wide flange and 25 mm high web suspended from the soffit @ 1200 mm centre to centre with with wire of 2.5 to 3 mm dia from purlin , Cross Tee - 1200, 0.55 mm thick having 35 mm wide flange and 25 mm high web inserted fixed into the slots of Main 'T' @ 600 mm centre to centre to form a grid of 1200 mm x 600 mm, Cross Tee - 600, 0.55 mm thick having 35 mm wide flange and 25 mm high web shall be placed perpendicular to the Cross Tee - 1200 to finally form a grid of 600 mm x 600 mm . complete all as per manufacturer instructions, as specified and directed by Eng-in-charge.
S&F 4mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system with provision of light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc. complete all as per manufacturer instructions, as specified and directed by Eng-in-charge.
S & F 4mm thick Asbestos cement plain building boards, fixed to timber framework an in ceiling with screws complete all as specified and as directed.
M & L 4.5mm thick cover fillets of tempered hard board 40mm wide and fixing with screws complete all as specified and directed.
S & F in repairs 18/19mm thick Prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/Brick work/Angle frame work alongwith 18mmx5mm fillets alround the boards as in built in book shelf and study table etc complete all as specifed and directed
M&L Taking down existing plaster over window chajja and similar location of area n exc 2 Sqm in patch work and applying primer coat of Pidilite 301 URP (@ 4 sqm per ltr of URP)mixed with cement in proportion 1:1 the and and applying 15mm thick cement plaster in CM 1:4 mixed with WPC of Pidilite 101 of 200ML for 50 Kg of cement and applying two coats of Cement Base Paint with and including necessary preparation to match with the existing shade.complete all as specified and directed by Eng-in-charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) exc 250 Ltr and n.exc 500 Ltr complete all as specified and as directed.
Taking down existing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clan and washing down complete all as specified and as directed by Eng-in-charge.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kg of cement per sq. metre.complete all as specified and as directed.
M&L for applying two coats of water proofing coating by using super latest manufactured by pidilite industries limited (or equivalent product manufactured by Sika/fosroc/choksey chemical), water and cement ratio 1:4:7 or the ratio as instructed by manufacturers on sunken floor and wall complete all as specified and as directed by Eng-in-charge.
M & L Rendering 15mm thick CM (1:4) over Roof mixed with water proofing compound as per manufacturers instruction and finished even and smooth complete all as specified and as directed.
M & L for applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3.8 kg/ sqm ± 5 % per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25° C, 0.87-0.89 kg/ litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc. and including applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed.
M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed.
Supply only integral water proofing Liquid, complete all as specified.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Eng-in-charge.
Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.
S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed.
S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls as fixed in repairs complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius as fixed in repairs all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 2.5mm to 3mm thick PVC transparent window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed
S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in steel window by taking down and refixing the steel fillets incl replaceing unserviceable steel screws and nuts complete all as specified and directed.
S & F in repairs Steel window Peg stay fixed to steel window with necessary nut and bolt complete all as specified and as directed.
S & F in repairs Steel window Handle fixed to steel window with necessary nut and bolt complete all as specified and as directed.
S & F MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railing framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed by Engineer-in-Charge.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) including removing debris beyond the premises,complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors apron etc laid and bedded and pointed in any mortar including removing debris beyond the premises,complete all as directed by Engineer-in-Charge.
M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in plinth protection/pavings etc, complete as specified and directed.
M&L for 300mm x 300mm heavy duty out door ceramic tiles 9 to 10mm thick (Capsule , Star or coin Pattern) in floors etc over and including screed bed or bedding layer of mortar 15mm thick in CM (1:6) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including levelling course of 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.
M&L Chequered cement concrete tiles with grey pigment cement and pigments in equal proportions and with pigments 250mm x250mm x 22mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm screed bed of CM (1:6) for laying floor finishes,complete all as specified and as directed.
M&L for PCC (1:2:4), type B1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, coping , benching slightly rounded or chamfered angles & throating etc including necessary use and waste of form work complete all as specified and directed.
ADNEEDS ENTERPRISE
DHIRAJ SAHARIA
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .