PROVN OF TOILET BLOCK FOR SALVAGE SUB DEPOT OFFICE AT FOD AND CERTAIN MINOR AND REVENUE WORKS AT BB CANTT, SRINAGAR

Amount

Surface dressing n. exc 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, lying of pipes, cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregsate as in foundation, filling and mass concrete complete all as specified and directed.

M & L for brick work sub class B old size brick straight or curved on plan exc 6m mean radius build in CM (1:4), complete all as specified and directed.

M & L for broken stone hard core of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Gde Fe 410-W (Gde- E-250) quality-A complete all as specified and as directed.

S&F mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M & L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) to be finished even and smooth without using extra cement, mixed with and including water proofing compound as per manufacturer's instructions complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to be finished even and smooth without using extra cement, mixed with and including water proofing compound as per manufacturer's instructions complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in sub base of floor complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 40mm graded crushed stone aggregates as in floor finishing the surface even and rough to receive floor finishes complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for preparation of surface and applying two coats of synthetic enamel paint on new steel surface over one coat red oxide primer of any description not otherwise described exc 10cm width or girth, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface such as skirting/dado of size 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering as in backing layer in CM 1:3, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square/ rectangular) polished, area of each tiles exc 0.11sqm but not exc 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM (1:6), complete all as specified and directed.

S&F wash down water closet (Pedestal pattern) white complete all as specified and directed.

S&F 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S&F Vitreous China wash basin, size 580 x 450mm, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including brackets and 15mm bore CP centre hole basin mixer for mixing hot and cold water complete all as specified and directed.

S&F 15 mm bore, Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F 15 mm dia PVC connection pipe 600mm long with PTMT nuts of suitable size complete all as specified and directed.

S&F CP brass soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F CP Towel Ring 200mm dia fixed with and including Chromium plated brass screws complete all as specified and directed.

S&F CP steel grating 75/100mm dia complete all as specified and directed.

S & F tubular towel rail 20mm dia brass chromium plated 'D' type 60cm long between flanges complete all as specified and directed.

S & F 15mm dia galvanised tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F 20mm dia galvanised tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 500 ltrs capacity rotaional moulded polythelene water storage tank (Three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Pt-I complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed

S&F extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150mm and fixed complete all as specified and directed

S&F mild steel butt hinges medium weight cold rolled 100mm long complete all as specified and directed.

S&F false ceiling with pre coated standard Gl angle, Tee and grid suspended with 4mm dia GI wire at 600mm c/c, angle of size 25x25x0.7mm fixed around main and cross Tee of section 38x25x0.7mm with soffits clips, holding and level clips and fixing the gypsum board 12mm thick with white paper layer on face side of size 600x600mm or any size as directed and applying two coats of acrylic emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distempering complete all as specified and directed

S&F 100mm bore RCC pipes, class NP2, laid and jointed complete with collars complete all as specified and directed

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes with concrete after they are laid and tested for 100mm bore of pipes complete all as specified and directed

S&F 35mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed.

M & L for 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete all as specified and directed.

S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as directed.

M&L 75mm thick, PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

M & L for PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregsate as in foundation, filling and mass concrete complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to be finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) to be finished even and smooth without using extra cement, complete all as specified and directed.

S&F rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour, 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment of Gde Fe 410-W (Gde- E-250), quality-A complete all as specified and as directed.

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Removing surplus excavated material from site to a distance not exc 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in sub base of floor complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L for TMT bar 5 to 10mm dia, as in stirrups, spacers and binders etc, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Use and waste of form work to sides of concrete foundation, footings, plinth beam etc, vertical or to batter for rough finished surface complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns for rough finished surface complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc for rough finished surface complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsate as in foundation, footings, foundation beam, plinth beams and bases of columns, basement slabs, and mass concrete complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsateas in pillars, posts, struts, piers, columns complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsateas as in beams, cantilevers , bressummers, lintels over 1.5m clear span complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 20-22mm thick granite stone slab (of any type) machine cut as in skirting/dado, jointed with grey cement slurry and pointed with white cement with admixture or pigment to match the shade of granite stone fixed over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface such as skirting/dado of size 300x200x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering as in backing layer in CM 1:3, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base of floor complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with hard glazed finish rubber topping wiyh grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

S&F 20mm dia decorative powder coated drapry rod with bright finish, including decorative side domes, brackets and minimum 8 Nos curtain rings per RM of length complete all as specified and directed.

M & L for brick work sub class B old size brick straight or curved on plan exc 6m mean radius build in CM (1:6), complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface such as skirting/dado of size 350x450x7mm/350x250x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering as in backing layer in CM 1:3, complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in sub base for lying floor finishes etc complete all as specified and directed.

S&F 40mm dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 32mm dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 25mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or brass ferrule complete all as specified and directed.

Supplying and laying of 32mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated etc. of Gde Fe 410-W (Gde- E-250) quality-A complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, landings and similar work (Horizontal or sloping) for rough finished surface n.exc 200 mm thick complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsate as in slabs supported on walls beam and colums in floors, roofs, landind, deck slabs and shelves and the like complete all as specified and directed.

S&F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwewd both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 15cm and n exc 22.5cm long complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and as directed.

S&F Steel rolling shutters made of 1.25mm thick laths, with out ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutter for rolling shutters complete all as specified and as directed.

S&F 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Excavation over areas not exceeding 1.5M in depth and getting out in any type of soil complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe.410-W Gde-E-250 quality A complete all as specified and as directed.

M & L for 40mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in floor finish the surface even and smooth with using extra cement including 3mm thick 38mm wide glass dividing strips complete all as specified and directed.

S&F suspended false ceiling system using 'E' grid supended ceiling grid system, gridsize 600mm x 600mm with and including GI frame work of main runners 38mmx24mm, cross Tee 38mmx24mm and wall angle 24mmx24mm hot diped galvanised steel with zinc coating not less than 120gm/sqm using 9mm thick high pressure stream cured fibre cement pre primed textured variant 'E' board classic, ISI marked IS-14862-2000 to be placed in grid of E grid suspended ceiling grid system duly suspended by 8mm dia GI bar hangers from existing purlins to roof with butterfly clips complete all as specified and directed.

M&L for point wiring with 1.5sqmm, copper conductor FRLS (standard) PVC insulated ISI marked unsheathed in and including PVC cassing & caping medium grade ISI marked of suitable size with all fittings/accessories and also including PVC ISI marked unsheathed 1.5 sqmm copper multi starandard cable FRLS as earth wire connected to common earth dolly and MS sunk pressed mild steel terminal box suitable for accessories, junctioin box, other boxes made from 1.6mm thick steel sheet of suitable size for mounting of switches, fan regulatores for following:-

One light/fan point controlled by one way switch 5 Amp

One 3 pin socket outlet, 5 Amps on independent board

S&F switch piano flush type 6 Amps 230 Volts one way, single pole complete as specified and directed.

S&F socket 2 in 1, 3 pin, 6 Amps, single pole on way complete all as specified and as directed.

S&F ceiling rose 3 phase PVC/polycarbonate, isolated body complete all as specified and directed.

S&F LED light fitting fixture 1X20W, 6500K, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat shrink, environmental friendly having power factor >0.95, surge protection 2.5KV, energy efficient ready to use complete all as specified and directed.

S&F LED Mirror light fitting 1 x10 W 6500K decorative ultra slim linear LED lighting fixture with extruded aluminium, heat shrink, environmental friendly, energy efficient, complete all as specified and directed.

S&F sheet metal enclosure for mounting MCBs, 240 volts with IP-43 protection, double door with 200 Amps rated busbar, 4 ways , fixed on wall duly grouted in wall and making good disturbed surface with electrical connection complete all as specified and directed.

S&F MCB single pole 6 to 32 Amp , 240 Volt , 50Hz AC, 'C' curve, 10 KA breaking capacity, complete all as directed.

S&F MCB SPN 32 Amp , 240 V , 50 Hz AC made from moulded self extinguishing termostat plastic and suitable for 'C' curve, 10 KA breaking capacity, complete all as directed.

S&F ventilating fan made out of high quality, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply including connecting to ceiling rose complete all as specified and directed.

S&F 6sqmm 1100 Volts grade, heavy duty PVC insulated multistranded solid aluminium conductor cable and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart including 4mm suspension GI wire, one twin core cable flat complete all as specified and directed.

S&F 10 watt, 6000K, LED bulkhead luminaires with opal diffuser and all accessories and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F 10sqmm 1100 Volts grade, heavy duty PVC insulated multistranded solid aluminium conductor cable and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart including 4mm suspension GI wire, one twin core cable flat complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or 4mm dia GI earth wire , procteded by GI medium grade pipe 15 mm bore upto 7.5 mtr including chamber of concrete pit in pcc (1:2:4) type B1 using 20 mm graded stone agg with 40 mm thick cover of RCC 1:2:4 type B-1 reinforced with 8mm dia TMT bars @ 100mm c/c both ways and MS frame of cover of angler iron of size 25 x 25 x 3 mm with lungs 2 Nos made with 6 mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering at bottom 1.75 Mtr long based on top edge of earth plate salt and charcoal filling test point made out of bornze/gun metal fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling and removal of surplus soil to a distance not exc 50 Mtr all as per Electrical Plate No. 3 of SSR Part-I and connected to earthing test point or indicated including testing on complete all as specified and directed.

M/S MAHIR MUNEER

M/S NORTHERN ELECTRICAL WORKS

mirandcompany