Providing a new PCC Retaining wall with chain link fencing and metal filling

Amount

Clearing scrub jungles and disposed from the site as per the direction of site Engineer including cost of all labour, lead, lift, etc., complete

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m. for foundation as instructed by the Engineer incharge for the following items including cost of labour , etc.complete.

Supplying and filling the basement and foundation, with M.Sand, watering ,consolidation ,etc.,as instructed by the Engineer incharge. including cost of material, labour, lead, lift etc., complete

PCC 1:2:4 using 12 to 20mm (machine crushed) metal for fencining without formwork including cost of all materials, labour lead, litf, etc., complete.

Supply and fixing of 50 Sq.mm GI Chain link fencing of 10 gauge with standard width and 2.45m height with 50x5mm GI Flat joint including cost of all material, labour for fixing, transportion, lead, lift, etc., complete.

Supplying and fixing in position GI Angles 75x75x6 mm over for corner fence post and MS flat 65x65x6mm width for intermediate post including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of GI 175x16mm size bolt, nut and washers of required sizes for holding chain link fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Site Engineer.

Supply and spreading of quarry dust inside the yard as per standard specification including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Supply and apreading of 20mm of HB stone inside the yard as per standard specification including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all albou, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone with steel mould, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

supply,fabrication and placing reinforcements of RTS rods in position as per drawing for all RCC works including cost of all materials, binding wire, labour for bending, tying, placing in position, lead, lift, etc. complete.

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc complete

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, lead, lift, etc. complete.

Colour washing two coats with approved qulity of APEX paint over one coat of white cement including cost of all materials , labour,lead and lift etc complete.

Shuruthi Engineering

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED