REPAIR/MAINT TO PATH, PLINTH PROTECTION, INTERLOCKING/CHEQUERED TILE AND CONNECTED WKS UNDER AGE B/R-I AT GE JHANSI

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Demolition of plain cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Brickwork with sub class B bricks straight or curved on plan etc 6m mean radius buiilt in CM (1:6) complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on other than fair faces of brick work or concrete surface as in finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in flooring finished even, complete all as specified and directed.

M&L PCC Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for 50mm thick sand cushioning, including watering and consolidation, complete all as specified and directed.

S&F factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of rubber mould with vibrating system, including CM (1:3) in edges of pavers, complete all as specified and directed.

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.

M&L for Providing precast cement concrete louvres and jallies, type B0, 1:2:4 (using 12.5 mm graded agg) 35mm thick (measured solid), including all mouldings but excluding frame and set in cm 1:4 complete all as specified and directed.

M&L for preparation of existing surface of walls and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismantling Asbestos Cement Corrugated or Semi corrugate in Roof covering complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets ,ridges etc as in ceiling complete all as specified and directed.

M&L mild steel (Fe 410W, Gde 250) work as roof trusses (framed) trussed, purlins, crane gantries ,rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) etc complete all as specified and directed .

m/s ramesh saran agarwal (BID ID -3295226)

M/s Jagdish Chandra Arora (BID ID -3295674)

ADARSH ENTERPRISES (BID ID -3295652)

VIJAY BUILDERS (BID ID -3296110)

HARNAM SINGH ANIL SINGH (BID ID -3296245)

Dubey Construction Company (BID ID -3295762)

FTH TRADERS (BID ID -3294817)

M/S Kumar Contractors (BID ID -3295825)