Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹15.0 L+₹1.1 L (7.95%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
27 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
REPAIR/REPLACEMENT OF TILES, FLOORING AND CERTAIN MISC REPAIRS TO TOILETS AT VARIOUS BLDGS AT AIR FORCE STATION THOISE UNDER GE(AF) THOISE
2023_MES_587373_1
GEAF/T-08/2023-24
Open Tender
Civil Works
Item Rate
210 days
GARRISON ENGINEER (AF) THOISE
As per tender document
7 documents required · 7 mandatory
₹500
GE AF Thoise
₹36,000
Yes
22 Aug 2023
29 Mar 2023
29 Apr 2023
29 Mar 2023
27 Apr 2023
8 Apr 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premis. complete all as specified and directed by Engr in Charge.
M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set over rendering 10 mm thick in cm 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr in Charge.
M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including15 mm thick screed bed in cm 1:4, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.
M& L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including15 mm thick screed bed in cm 1:4 in floors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.
M&L for Virified Ceramic tiles in light shade10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42sqm,over 15 mm thick screed bed in CM 1:4 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.
M& L Screed bed or bedding layer or layer of 1:4 mortar 20 mm thick for laying floor finishes complete all as specified and directed by Engr in Charge.
S & F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing. complete complete all as specified and directed by Engr in Charge.
M&L Chequered Cement concrete tiles 20 cmx 20 cmx 25 mm thick , set, jointed and pointed in neat cement slurry in floors with grey cement and pigments all as specified and directed.
Demolition of cement concrete (Un Reinforced) any description and in any position not otherwise specifically provided for.
S&F Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment. Complete all as specified and directed by Engr-In-Charge.
M&L Sand cushioning under floors or in foundations including watering and consolidation.
M&L for 50mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.
Dismantling of cast iron or reinforced concrete drain pipes upto 100mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
S & F for PVC (SWR) pipes 110 MM bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S & F for PVC (SWR) pipes 75 MM bore single socketed, in any length with rubber ring joints, fixed on floor complete all as specified and directed.
Demolition of cement concrete (Reinforced) any description and in any position not otherwise specifically provided for.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for Drain cover . complete all as secified and directed by EIC.
M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregete) as in slabs supported on walls and the like complete all as specified and directed.
Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.
M&L 20mm Thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.
Demolition of Pre cast concrete block masonry built in CM incl all quoins arches pillers etc but excluding ashlar facing dressed stone and pre cast concrete article complete all as specified.
M&L for precast cement concrete block masonry with solid block, Type C1 1:3:6 (using 20mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:6 extra complete all as specified.
M/L for External rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.
M/L for Internal rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.
M&L preparing newly plastered or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surface of wall including Chalk whiting, on plastered surfaces etc and applying two coat of white wash on walls, complete all as specifed.
Taking down chowkats or frames exc.1.5 sq.m but n exc 4 sq.m each(without talking off shutters from the frame) including all acessaries complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.
S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.
S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F Extruded Aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed
S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size. complete all as specified and directed.
S&F in repair for Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
S & F in Repair for Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, bottle trap 32mm dia.and waste cupling 32 mm dia. complete all as specified and directed.
Taking down steel tubing dia 15 mm and connections, including cleaning for refixing or removal to store. complete all as specified and directed.
Taking down steel tubing dia 20 mm and connections, including cleaning for refixing or removal to store. complete all as specified and directed.
S&F for Galvanised steel tubes, mediam grade 15 mm dia. complete all as specified and directed.
S&F for Galvanised steel tubes, mediam grade 20 mm dia. complete all as specified and directed.
S & F in Repair Grating doom 100 mm dia with waste hole of PTMT.(Minimum weight 25 gms) complete all as specified and directed.
S & F in Repair Bib taps 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed.
S & F in Repair Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F In Repair for PVC connections 15 mm size with PTMT nuts of length 600mm. Complete all as specified and directed by Engineer Incharge.
S&F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for fixing of WC and making good floor to match the existing surface, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for fixing of WC and making good floor to match the existing surface, complete all as specified and as directed by Engr-in-Charge.
M/S MOHD MUSSA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .