Day to day maintenance of BSNL staff quarters in Aliganj (Sector -D, K, Chandralok ) and Vikas Nagar under BSNL Civil Service Centre, Aliganj, Lucknow during the year 2021-22.

Amount

Deduct for not providing hinges in doors, windows or clerestory window shutters with :

Stainless steel butt hinges with stainless steel screws :

For 2nd class teak wood and other class of wood shutters.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

LMR ITEMS

Providing manual assistance for attending petty day-to-day maintenance services as & when required i/c all required T&P and scaffolding etc. (Note: Minimum time shall be reckoned as half day even if the time required for doing the job is less than half a day. Material required for maintenance shall be supplied free of cost.)

Skilled manual Assistance

unskilled manual Assistance

Dismantling and removal of existing broken Indian type/ Orissa pattern WC seat & pedestals etc. carefully at any floor upto floor five level including disposal of malba to the dumping ground.

Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day work at one site shall be taken as one job.)

Making arrangement of double scaffolding system for repair works etc. on the exterior side beyond scafolding cost cosidered in basic items, up to four story height made of bamboos 1.5m centre to centre horizontal & vertical tubes and M.S. tube challies for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. ( Minimum width shall be measured 1.5 Metre and height shall be measured upto repairing height from ground shall be considered for payment )

Providing 50 mm thick PRECAST RCC COVERS of specified sizes with cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) including cost of required finishing with neat cement punning on exposed surfaces but excluding cost of reinforcement steel all complete as per the direction of Engineer-in-charge. ( Per sqm area per cm depth shall be measured for payment )

Supply of fittings & fixtures of approved quality, as & when required for day-to-day works, as per direction of Engineer-in-charge.

PTMT Short Body Bibcock 15mm nominal bore.

PTMT Long Body Bibcock 15mm nominal bore

PTMT Pillar cock 15mm nominal bore.

PTMT Stop cock 15mm nominal bore.

PTMT Grating 100mm dia.

PTMT Ballcock 20mm

PTMT waste jali size 32 mm

PVC Lid/ Cover (white) for Euoropean wc seat.

10 litre capacity low level PVC cistern

PVC Cistern handle lever.

PVC Cistern internal fittings.

PVC Cistern washer

GI Pipe 15 mm nominal bore ( B- class )

GI Pipe 20 mm nominal bore ( B- class )

GI Pipe 25 mm nominal bore ( B- class )

GI Union 15 mm nominal bore

GI Union 20 mm nominal bore

GI Union 25 mm nominal bore

GI nipple 15mm dia 50mm long.

GI nipple 15mm dia 100mm long.

GI nipple 15mm dia 150mm long.

GI nipple 20mm dia 100mm long.

GI socket size 15mm dia.

GI elbow size 15mm dia.

GI Tee 15 dia nominal bore.

GI long screw 15 mm nominal bore.

UPVC pipe of approved make 3240 (40 mm OD) pipe

UPVC pipe of approved make 4050 (50 mm OD) pipe

UPVC fittings for 3240 (40 mm OD) pipe elbows

UPVC fittings for 3240 (40 mm OD) pipe tees,

UPVC fittings for 4050 (50 mm OD) pipe elbows

UPVC fittings for 4050 (50 mm OD) pipe tee

Adhesive for jointing PVC Pipe ( 100 ml )

CP Brass Pillar Cock

CP Brass Bib Cock

CP Brass bib-cock Spindle (L&K or eq.)

SS water jet (flat type) for European seats with PVC lead

Health fauset with 1.5 metre flexible tube and hook

Unplasticised PVC Connection pipe with PTMT union 45 cm long 15 mm nominal bore.

Semi rigid PVC wast pipe for sink and wash basin 32mm dia with length not less than 700mm including PVC waste fittings.

MS Screw 38 x 8mm (Wood works)

MS Screw 20 x 6mm (Wood works)

Nails of different shape & size (1 kg. each)

600x450 mm beveled edge mirror of superior glass (of approved quality) with 6 mm thick hard board , 4 Nos PVC Sleaves C.P. brass screws and washers.

Anodised aluminium sliding door bolt size 250x16mm

Anodised aluminium tower bolt size 150x10mm

Anodised aluminium tower bolt size 100x10mm

Anodised aluminium handle size 125mm

Anodised aluminium handle size 100mm

Anodised aluminium floor door stopper twin type

Door seal 0.91 metre long

Galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm

Stainless Steel A ISI 304 (18/8) kitchen sink without drain board size 610x510 mm bowl depth 200 mm

White vitreous china Flat back wash basin of size 550x400 mm.

White vitreous china pedestal type (European type/ wash down type) water closet pan.

PVC long bend for low level flushing cistern.

Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A 110 mm diametre.

Unplasticised - PVC moulded Single tee with door 110x110x110 mm.

Unplasticised - PVC moulded bend with door 110x110x110 mm.

M.S. clamp 100 mm dia.

Ceremic floor tile 300 x 300 in all colour and shade of approved make.

Cement

Coarse Sand

Dr Fixit URP

Credit of unserviceable fittings and other materials recieved from dismantling:

Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc.

Old rusted (unserviceable) C.I./S.C.I. Pipes and fittings, Mild Steel/ Steel Sections, G.I./M.S. Pipes etc.

Old (unserviceable) wooden Door Shutter (Of area 3 sq. metres and below).

Old (unserviceable) PVC flushing cistern of all sizes.