85813ADDN / ALTN AND SPL REP TO OLD OFFRS/JCOs/OR MD ACCN AT AFMC PUNE UNDER GE (SOUTH) PUNE.

Amount

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m all as directed by Engr-in-Charge

M&L for water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane non woven, polyster weighing not less than 3.5 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each and refixing in same opening complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame n exc 1.5 Sqm each and refixing in same opening complete all as specified and as directed.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh etc complete all as specified and directed. (a) SP 20048 (b) Glazing clips 19352

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall of ISI mark complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed.

S&F factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

S&F 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, etc, filled with PCC 1:3:6 type C-0 complete as specified and as directed.

S&F 165 x 60 mm size Pressed steel frames for doors with two or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., filled with PCC 1:3:6 type C-0 complete as specified and as directed.

S&F 35 mm thick Factory made IInd class hard wood Glazed and skeleton shutters, open rebated divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc ; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (single panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces, complete as specified and as directed.

S&F IInd class hard wood small ffittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, article not exc 200 cucm each, complete as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed by welding to the pressed steel door frame as in repairs, complete as specified and as directed.

S&F 200 mm aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed with steel screws, complete as specified and directed.

S&F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and as directed.

S&F 100 mm butt hinges, extruded aluminium alloy type B-21 with galvanised mild steel hinge pin, anodised and fixed with screws complete as specified and as directed.

S&F Aluminium anodised 150mm handle cast type, complete as specified and directed.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark complete all as specified and directed

M & L for Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. Contd...

Contd.... (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified and as directed.

Demolation of cement concrete (unreinforced) of any decreiption and in any position not otherwise specifically provided for

M&L for 25 mm thick plain cement concrete type B-1 (1:2:4) ( 20 mm graded stone aggregate ) as in floors complete all as specified and directed.

M&L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S&F stainless steel readymade latch type 75mm in size hinges suitable for cupboard shutters etc. complete as per site requirement complete all as specified and as directed.

S&F readymade type ballcatch lock of aluminium and PVC body suitable for CB shutters etc. complete all as specified and as directed.

M&L for 18mm thick PVC Ply board both side decorated choice coloured as approved shade fixed as in kitchen / cupboard shelves and shutters of almirahs including necessary required teak wood, batten frames of size 50 x 30 mm and including teak wood lipping all around the edges and with Stainless steel piano hinges etc complete all as specified and as directed as per site requirement complete all as specified and directed. [Make : Ashish, Rajshree, Sintex]

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick of size 300 x 300 in floor etc set & jointed in neat cement slurry and poited in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 300mm x 600mm x 7 to 8mm thick of colour and pattern as approved by EIC, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM 1:4 including triangular filleting on top in CM 1:4 complete all as specified and as directed.

M&L for Coloured Ceramic tiles 9 to 10mm thick (Square/rectangular) of size 600 x 600 mm in floor etc set & jointed in neat cement slurry and poited in white or coloured cement to match fixed and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for coloured vitrified tiles 600 x 600 x 8 mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for coloured vitrified tiles 600 x 100 x 8 mm as in skirting/dados, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and as directed.

Dismantling unserviceable PVC water storage tank of 1000 Ltr capacity, complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks 1000 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 complete all as spoecified and directed.

Disconnecting existing tanks 1000 lit capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. (Note :- Cleaning repairing, etc. measured separately)

Dismantling unserviceable PVC water storage tank of 500 Ltr capacity, complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks 500 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 complete all as spoecified and directed.

Disconnecting existing tanks 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. (Note :- Cleaning repairing, etc. measured separately)

S&F 20mm bore ball brass valve, high pressure with polythine float and fly nut complete screwed for iron pipe or brass ferule complete all as specified and directed.

All as per Sl. item No. 44.00 above but fixed in repairs complete all as specified and as directed.

Demolition of stone / block masonry /brick masonsy built in CM complete all as specified and as directed.

M&L for Brick work with Fly ash brick, straight or curved on plan exc 6M Mean radius built in type CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone wall etc. incl raking out joints, hacking for key, scrubbing down with water etc

M&L for rendering 10 mm thick in cm 1:3 on fair faces of brick work or concrete surface in ceiling of roof, chhajjas and facia etc complete all as specified and as directed.

M&L for rendering 10mm thick in ready mix in cement mortar (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.(Make:- ACC's"Acco plast" / CK Birla's "Aerocon" / "Magic plast" or equivalent )

Material and labour for 15 mm rendering in ready mix cement mortar (1:4) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately.) (Make:- ACC's"Acco plast" / CK Birla's "Aerocon" / "Magic plast" or equivalent)

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall, applying 3mm thick punning coat with wall care putty and applying two coats of Acrylic distemper on walls over a coat of primer etc all as specified and as directed.

Complete removal of existing treatment, M&L for applying 3mm thick punning coat with wall care putty and applying two coats of Acrylic distemper on walls over a coat of primer etc all as specified and as directed

M&L for Complete removal of existing treatment on walls by scrapping washing rubbing down etc and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L Two coats of Oil bound distamper including prepration of newly plastered wall surface complete all as specified and as directed.

M&L for two coats of Oil bound distempar including prepration of old surface complete all as specified and as directed.

M&L for preparation of newly plasterd surface of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preapration of old surface and applying two coats of white wash on ceiling complete all as specified and as directed.

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

S&F 40mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to edges or edges of landings, steps, cills etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm girth in Brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and as directed.

S&F in repairs GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

M&L for GI tubing 20 mm dia medium grade with all fitting & fixed complete to wall & Ceiling or laid in floor complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed.

S&F bib tap of cast copper alloys with crutch or butter fly handle screwed down screwed for iron pipe or for brass fenule and fixrd for 15mm dia pipe inclduing removing the old unserviceable bib taps fixed in repairs complete all as specified and as directed.

Supply & fix 15mm bore pillar tap fancy type, cast copper alloy with capstan head, chromium plated screwed down, high pressure with or without lettered “hot “ or “cold” with long screwed shanks and fly nut complete all as specified and as directed.

Supply and fix in repair 15mm stop valve fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends of, complete all as specified and as directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified & directed. (Note : pipe will be laid under floor)

S&F in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and direrected.

S&F in repair stop valve chromium plated fancy type with long shank and cup (concealed type) cast copper alloy screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete 15mm dia.complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F vitreous china wash basin white flat back of size 550mm x 400mm including 15mm dia CP pillar tap, bottle trap PTMT waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete in repairs all as specified and as directed.

S&F vitrous china corner wash hand basin white 400x400mm flat back inclduing and providing waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc fixed in repairs all as diected by EIC. (Make : Cera of cat no S2020123 or equivalent model in list of makes.

S&F PVC box type cabinet of size 45 x 35 x 10 cm with 3mm thick mirror mounted on shutter with PVC shelves inside fixed in existing opening of wooden cabinet including taking down existing of make complete all as specified and as directed.

S&F brass CP, Jet Spray assembly complete all as specified and as directed.

S & F in repair CP health faucet with flexible pipe fancy type complete all as specified and as directed.

S&F in repairs CP toilet fitting Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No. CON-269 of "Jaquar" or of Equivalent make specified here in after

S&F in repairs 20mm bore CP, ‘D’ type stainless steel tubular towel rail 60 cm long between flanges complete fixed

S&F stainless steel CP toilet paper holder complete all as specified and as directed.

S&F in repair stainless steel, CP, towel ring square complete all as specified and as directed.

M&L for Soap dish, brass chromium plated complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, coupling, waste pipe and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed.

S&F in repair steel grating 150mm size of ISI mark complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair aluminium powder coated decorative type curtain rod 20mm dia complete all as specified and as directed

S&F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m informal and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and as directed.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth n exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.complete as specified and as directed.

M&L for precast cement concrete 1:2:4, typeB1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4. complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soils complete all as specified and as directed.

S&F for Stainless steel plate rack of size 600x750x25 mm of approved quality complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

Demolition and breaking up existing sewage/drain pipes (Salt glazed ware ,AC or reinforced concrete ) set in cement mortar pipes and the like not exe 150 mm bore set in cement mortar and removing demolished material to a distance exc 50 m and not exc 100 m complete all as specified and as directed.

Supply and fixing (SWR) pipe single socketed in any length with rubber ring joints laid in floor for 110mm bore complete all as specified and as directed.

All as per Sl. item No. 106.00 above but 75mm bore of 6kgf/cm2 capacity. Complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe single socketed in any length with rubber ring jounts fixed to walls for 110mm bore complete all as specified and as directed.

All as per Sl. item No. 108.00 above here-in-before but 75mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) junction single (singleT) equal or unequal nomminal bore in mm joints fixed to walls for 110mm bore complete all as specified and as directed.

Supply and fixing PVC Bends any radius 110mm bore complete all as specified and as directed.

All as per Sl. item No. 111.00 above but 75mm bore complete all as specified and as directed.

S&F PVC vent cowl 110mm bore complete all as specified and as directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out all as specified in (Soft/hard) average soil. complete all as specifed and directed.

M&L for 150mm thick hard core of guage not exc 63 mm broken stone spread and levelled, watered and rammed to a true surface complete all as specified and as directed.

M & L for Moorum / red bajai filling in floors or panings laid in layers not exc 15 cm thick spread levelled & rammed including watering complete all as specified and as directed.

M&L for Cement concrete 1:4:8 typeD- 2,(40 mm graded aggregate)75mm thick as sub base of floor complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on and including 75mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping, on top of wall, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work. complete all as specified and as directed.

Excavation in post holes each n.exc 0.50 cum getting out ,returning filling and ramming of earth or broken rubble mixed with earth around in layers not exc 25 cm ,watering,and removing surplus soil toa distance n.exc 50 m and making good surface in hard dense soil. complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D2 using 40mm graded stone aggregate in foundation filling in mass concrete. complete all as specified and as directed.

M&L for steel work in tubular frame work as in posts & purlins and other connected members etc including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS-1161-1979 gde St 240 of medium duty complete all as specified and as directed.

M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified incl ridge sheet complete all as specified and as directed.

M&L for preparation steel surfaces of any describtion over 10cm in width or girth incl preparation of new untreated surfaces and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.complete all as specified and as directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down of old unserviceable meter box complete all as specified and directed

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light / fan point controlled by one way switch 5 Amps complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified.

One light point controlled by one, two way switch 5 Amps complete all as specified.

One bell point controlled by one, bell switch 5 Amps complete all as specified.

All as per item No 129.00 above for modular socket power point but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with 3mm sunken boxes, switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light / fan point controlled by one, one way switch 5 Amps complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified.

Bell/Buzzer points controlled by one bell push.

One light point controlled by two, 2 way switches 05 / 06 Amps.

All as per item No 131.00 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

S&F modular Bell push modular 6 Amps single module complete all as specified and as directed.

S&F bell push flush type 5 A, 240 volt complete all as specified and as directed.

S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S&F Modular switch one way 6 Amps, 1 module complete all as specified and as directed.

S&F Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified and as directed.

S&F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and as directed.

S&F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S&F Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S&F Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S&F Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and as directed.

S&F switch piano single pole flush type 06 amps 240 volts one way complete all as specified and as directed.

S&F Switch piano flush type, single pole, two way, and 6 Amp complete all as specified and as directed.

S&F socket outlet 06 amps, flush type 240 volts complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin, 5 amps and 15 amps multipurpose flush type complete all as specified and as directed.

S&F Electronic fan regulator step type 2, 120 watt suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S&F City 3 decorative wall light fixture made up of polycarbonate, suitable for upto 15 watt TU retrofit CFL/LED bulb (B-22 base) including 10 watt LED make Havells cat no - LHDL06160099 or equivalant to Crompton/phylips) complete all as specified and as directed

S&F LED batten light fittings wall mounted type Astra high efficiency LED batten luminare with extruded aluminum housing and robust constructionr 1x13 watt with high output diffuser and all fixing arangements Philips Cat Part No - BN150W LED13S 6500 PSE OD GR or equivalant to Bajaj/Crompton) complete all as specified and as directed

S&F LED batten light fittings wall mounted type Astra high efficiency LED batten luminare 1x10 watt with high output diffuser and all fixing arangements Philips Cat Part No - BN021 LED10S 6500 PSU GRS1 or equivalant to Bajaj/Crompton) complete all as specified and as directed

S&F LED street light luminaries with high power LED and unique peanut lens deep drawn aluminium housing anodised inside and acrylic cover complete with 36 Watt in built control gear including twin core copper conductor for connection of street light fitting from ceiling rose and street light bracket made out of 25 mm dia GI pipe light grade,0.90 mtr long bend to shape 130 degree angle fixed to wall by two nos MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed (Make : Crompton cat No LSTS-36-CDL-M or or equivalant to Bajaj/PHILIPS)

S&F LED Endura Bulkhead fittings wall mounted type high efficiency LED Bulkhead luminare 6 watt with high output diffuser and all fixing arangements conforming to Philips Cat Part No - WT202W LED6S CW PSU S2 PC or equivalant to Bajaj/Crompton complete all as specified and as directed

S&F LED mirror light fitting LINNET 2' long wall mounted type high efficiendcy 1 x 14 watt with high output diffuser and all fixing arrangements complete all as specified and as directed. (Make- Crompton cat part no- LCL-14- CDL or equivalent make specified here-in-after)

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed

S&F MCB SPN DB 8 way ,double door, with 200 amp rated busbar 240 V, SPN recess mounted /wall mounted all as specified and as directed.

S&F MCB DB,SPN, sheet metal enclosure, 4 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces,all as specified and as directed.

S&F MCB SP 6-40 Amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F MCB TPN 63 amps,10KA, 240V,'C' series complete all as specified and as directed.

Supply and Fix MCCB 100 Amps, 16 KA, 4 Pole,415V, electronic protection unit complete all as specified and as directed.

S&F MCCB 63 Amps, 16 KA, 4 Pole,415V, electronic protection unit complete all as specified and as directed.

S&F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity,'C' series,240 V complete all as specified and as directed.

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Three runs of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit all as specified and as directed.)

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 6 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc in any type of wall , making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :- One meter of conduit along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length.)

M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Six runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit all as specified and as directed.)

S&F wall mounted LED 20 watt LED BATTEN for surface Mounted, with polycarbonate housing, high transmissitivity diffuser and high lumen output, 230 volts etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed. (Make :- Bajaj Cat part No BCLSB 20 WH or its equavalent in Philips, Wipro, Havells. all as specified and as directed.)

S&F Security light fitting for Energy saving new generation environmental friendly long life versatile presure die cast IP 65 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangementsnd provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape and including taking down old unserviceable existing light fitting of any description complete all as specified and as directed . (Make :- Bajaj Cat No BCLST 25W LED or its equivalent in Wipro/philips all as specified and as directed.)

Taking down Ceiling fans of any size, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations complete all as specified and as directed

S&F in replacement canopy for ceiling fans(Set of two) complete all as specified and as directed

S&F in replacement MS clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200/1400 mm sweep ceiling fan. complete all as specified and as directed

M&L for meter box suitable for three phase meter made out of 2 mm thcik CRCA Sheet with heavy duty SS hinges with door and locking arrangement with Godrej pad lock with suitable visible glass for taking meter reading and with earthing stud- 1 no. and provision of in/out cable and duly powder coated concealed/flushed to wall complete including fixing the electric meter after dismantling from the existing pannel suitable way for easy removale for repair and making good disturbed area complete all as specified and directed.

M&L for meter Box suitable for post paid AMR meter (SMART METER) made out 2 mm tick CRCA sheet with heavy duty SS hinges un removable type with door and locking arrangement and with Godrej pad lock with suitable visible glass for taking meter reading and with earthing stud -1 nos and provision for in/out cable and duly powder coated suitable for for fixing single smart postpaid Meter any size concealed/flush to wall complete including fixing the electric meter after dismantling from the existing pannel suitable way for easy removal for repair and making good disturbed area complete all as specified and directed.

M&L for Brick work with subclass 'B' old size bricks, (clay burnt bricks) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

S&F air fresher fan PVC type soundless 230 volts ISI marks of size 250 mm sweep including fixing arrangement complete all as directed. (Make- Bajaj Cat No- 70049 or equivalent make in Crompton/Orient.)

M&L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

Suma Construction

Samruddhi Construction

KHANDELWAL ASSOCIATES

M/s.BAJRANG CONSTRUCTION

L.K.R.TIWARI CONSTRUCTION

Khanuja Industries

SHAILENDRA B TULSANI

SHAH BUILDERS