REPAIR/MAINT TO JOINERY, KITCHEN HARDWARE, CUPBOARD, ROOFING, PLUMBING, FLOORING, SANITARY FITTING, SUNKEN TREATMENT, INTERNAL WATER SUPPLY AND OTHER CONNECTED WORKS AT OTM ACCN OF SRC, MES AND TA FATEHGARH CANTT

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6 including demolition old brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work (except bricks) with old size sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6 including demolition old brick work built in cement mortar or cement lime mortar complete all as specified and directed. Note : Serviceable bricks retrieved from demolition under Item No 1 & 2 shall be re-used

Taking down cement or cement lime plaster on brick or stone walls or concrete surfaces etc (any thickness) including raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish off the premises, complete all as specified and as directed

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and applying two coats of oil bound distemper of approved shade over a coat of primer over & including 1mm thick wall care putty complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement and applying two coats of cement based paint over a coat of alkali resistant primer over and including 1 mm thick exterior wall care putty, complete all as specified and directed

M & L for rendering 5 mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement, including preparation of surfaces and applying three coats of whitewash, complete all as specified and directed

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling of existing tiles, mortar bedding and rubbish off the premises, complete all as specified and directed.

M & L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed or bedding layer in cement mortar 1:6, including dismantling of existing tiles, mortar bedding and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e. 450 x 300 mm or 600 x 300 mm or as directed by Engineer-in-charge) on vertical surfaces such as dado, skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4, including dismantling of existing tiles, mortar bedding and rubbish off the premises, complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed