ELECTRIC WORK UNDER TN-162

Excavation of pit in ordinary rock which does not require blasting/murrad (in Jodhpur discom) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit.

(A) Height of poles/R.S.Joist/M.S. Rail /Size of pit

9 Mtr/ 1.2mx0.6mx1.50 m deep

(B) Lattice Tower /Size of pit

11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep

12.8/12.6 Mtr/ 1.5mx1.5m x2.10 m deep

Safe carriage of PCC poles including loading / un-loading

a) 9 Mtr. Long-400 Kg /11 Mtr. PCC pole

Within 10 Kms.

Above 10 Kms. & upto 30 Kms. Add for each Km.or part [email protected]/km

Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site

Within 10 Kms.

Above 10 Kms. & upto 30 Kms. Add for each Km.or part [email protected]/km

Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc.

Within 10 Kms.

Above 10 Kms. & upto 30 Kms. Add for each Km.or part [email protected]/km

Safe carriage of fabricated lattice towers structures and sub-station structures type AB, AB beams, isolators structures etc. including loading/unloading and stacking in the Nigam. Stores / at work site.

Within 10 Kms.

Above 10 Kms. & upto 30 Kms. Add for each Km.or part [email protected]/km

Erection of all type of steel supports in the excavated pit in alignment after checking the same with plumb line including fixing of cross arms and top hamper before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the remaining portion of the pit will be back filled with soil. The nuts & bolts will be provided by the contractor as per Nigam's specification for which payment will be made at the prevailing store issue rates. The cost muffing and grouting will be paid extra.

Lattice Structure

Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates.

(B) IN RURAL AREA

PCC Poles 9 Mtr. Long (400 Kg)

Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base.

Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station.

Fixing of cross arms with clamp on erected support as per design. The nuts &bolts will be supplied by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates.

33 KV cross arms

Fixing and assembly of disc.point channel pair with pilot plates&clamps on erected double pole structure as per design. The nuts &bolts are to be provided by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates.

33 KV line

Fixing of 33kv pin insulator with pins.

Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. The nuts and bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates.

(A)G.O. switch . with earthing blade.

33kv G.O.switch

Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate.

(B) IN RURAL AREA

ACSR DOG

Supply of MS nuts & bolts

Please Enable Macros to View BoQ information