15TH FINANCE COMMISSION 2025-2026 UNTIED GRANT IST ALLOTMENT

Amount

Dismantling and Clearing away from this site for exisiting damaged condition of work for including cost for all labour charges etc., Complete as per standard Specification. i) Brick work in Cement Morter:

ii).Cement Plastering work(SOR; SL.NO;74/320,PAGE NO;25)

Steel centering for side and sifits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification. i)Plain surface:

Supply and fabrication of steel using TMT rods for all Reinforced cement concrete works including cost and conveyance of all materials and all labour charges for cutting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete. as per standard specification SS 86 & 86A V,VI, VII (S6) 7,3

M-20 CONCRETE - Providing and laying in position,standarJsed design mix M-20 Grade using 20mm and down graded hard broken granite stone jellr for al! RIC items of works with minimum cement content of 325Kg/m3. and maximum wa\et camant ratio of 0.55 including admixture(pIasticiser/euper plastiCi4eF) in recommended praportioris es per IS:9103 tc accelerate, retard setting of concrete, improve workabiIil:y without imp8iring sbengtti and duisbility with 8bout (5.70 eu.m.)940.50Kg of 20mm machine crushed stone jally and with about (2.80 eu.m.)462.00Kg pf 1Q12mm machina crushed jely and with about (4.25 eu.m.)701.25Kg of sand, bu exc/uding cost of reinforcement grill and fabricating chargas, oenfering and shuttering end also induding laying, vibrating with mechanical vibrators, finishing curing, etc and providing fixtures like fan clamps in the RIC floor/roof slaös wheravar neccessary without clambing extra, etc. oomplate Complying with standard specificafion end as directed by the clepartmental offlcers. me coarse and fine aggregates to be u6e¢t should comply with the requiermante of IS 383•2016 (No separate payment will be made by the dapertmenl

Brick work in cement mortar 1:5 (one part of cement and five part of M.Sand)mix using II Class bricks of size 8 3/4 X 4 3/4X 2 including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.

Supplying and fixing 75 mm Thick RCC Pre cast Slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door:roviding and fixing casementdoors fabricated from unplasticizedpolyvinyl chloride (uPVC) sections.Profiles:The profiles should be three chamber system whichprovideshighinsulation properties with outer frame 60mmx 55mm with an outer wall thickness of 2.4mm.Thewindounit should be designed with all corner joints mitred andfusion welded. Windows should be steel reinforced with 25x 24 x 25mm steel reinforcement with a thickness of 1mmto have dimensional stability. The sash should be of 60 x102mm. The mullion shouldbe of 60 x 74mm. The profilesshould have co-extruded seals.Hardware: All the hardware likefriction stays, handlesshould be screwed with self tapping screws. The handles,locks should be designed so that they cannot be releasedfrom outside.Glazing: The window system should be glazed with 5mmplain float glass / 6mm bison lamInstallation: Theprofiles should be cut to length and welded45 degrees. The window should be designedsuch that thewater drainage does not pass through the reinforcementchamber. The window system should be fixed directly tothe plastered brick wall using self expanding nylon plug anddriving ms electroplated screws into plug. UPVC DOOR M-0673 PAGE108

B) ALUMINIUM TWO TRACK WINDOW SIZE Supplying fabricating and fixing in position of Alumi,Anod natural colour matt finish sliding window in two track in all floors with following sizes . All the three shutters with sliding arrangemenst the bottom section shoulld have gutter arrangements so to drain the water entring and made with extruded aliuminium section for outer frames as shown below with necessary accessories such rubber beading .,Necessary dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as drected by the departmental officers . The Aluminium surfaces should be anodised with matt finish under electrically condition in accordance with IS specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing as directed .

E) LOUVERED VENTILATOR Supplying fabricating and fixing in position of Alumi,Anodised natural colour matt finished LOUVERED VENTILATOR fixed window with three panels using 62*38*[email protected]/m and the louvers with moving arrangement will be made with Aluminium channel of size 60*30*4 mm @ 1.27kg/m with necessary glass panes for louvers 4mm thick Aluminium clips , including all materials,labour,power consumption charges required for fabrication if necessary chipping dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as drected by the departmental officers The Aluminium surfaces should be anodised with matt finish under electrically condition in accordance with IS specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) complete. All the materials should be got approved by the Engineer incharge before fixing as directed .

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Daddoing with glazed titles of size 300x200x6mm of approved make and quality and clour cement mortor 1:2 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification.

B) Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

BE) Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supplying and fixing in position Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mountingswitch box on wall with 6A one way module switch with module front plate with painting of Suitable colourfor Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End SD :18

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin noninter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wireconnection of 14 SWG TC wire for open PVC plug point SD:37

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Painting the walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)

Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 110 mm dia PVC 4 Kg/m² pipe

110 mm dia PVC TEE

110 mm dia PVC Coupling

25 mm dia UPVC Pipe

25 x 20 mm dia UPVC Thereded Elbow

20 mm dia water not Tap

25 mm dia PVC Coupling

25mm dia UPVC TEE

25mm dia UPVC Elbow

Towards labour charges for fixing of PVC ,GI pipe and (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification. 110 mm dia PVC pipe:

25 mm dia UPVC Pipe

Providing and Arrangements for Council Meeting Hall Chairs and Tables ,Wood Furnitures as per quation by Ramanathapuram District Sarvodaya Sangh Charka Works 40 , Railway Feeder Road ,Srivilliputtur-626 125 (Tamil Nadu)

G RAJENDRAN (BID ID -1441488)

GOPALAKRISHNAN S G.R.CONSTRUCTION (BID ID -1441520)

K GNANAGURU (BID ID -1442015)