Road Safety works For Widening and Strengthening of road Ajgain Malihabad Itaunja SH 115 between Km 19.020 to 29.095 in distt Unnao

Providing and laying hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes. (Thermoplastic bar marking)

Providing and laying hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes. (Zebra crossings)

CAUTION BOARD Providing and erecting direction and place identification retro-reffectorised sign as per IRC-67 made of high intensity grade sheeting vide clause801.3 fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75×75×6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45×45×60 cm. below ground level as per approved drawing , complete. (90cm eqvilateral triangle with diff plate size 20 cm x60 cm) .

For Stop Sign Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium shithing, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing(90 cm high octagone)

Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing

Supply, fixing & eraction of built up Cantilever Structure 2.40 m span comprising of one vertical posts of 7.30 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete.

Sheet