PROVISION OF CERTAIN REVENUE WORKS AT ARDE UNDER GE (I) RnD PASHAN

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 metre in width as well as 10 sqm on plan including getting out all kinds of soil and disposal of excavated earth upto 50 metre and lift upto 1.5 metre complete all as specified and directed by Engineer-in- Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 metre and including getting out and disposal of excavated earth lead upto 50 m complete all as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 typeD2 (graded stone aggregate 40 mm nominal size) complete all as specified and directed.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in cement mortar 1:6 complete all as specified and directed.

Material and Labour for rendering 15 mm thick in cement mortar 1:4, complete all as specified and directed.

Material and labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Providing and laying ceramic tiles Matt/Antiskid finish of size 300 x 300 mm in floor (thickness not less than 7mm) conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid over and including 20 mm thick cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, complete all as specified and directed within a lead of 50 m and lift upto 1.5 m in all kinds of soil complete all as specified and directed.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets, sunken floor etc., up to floor five level, including the cost of centering, shuttering and finishing with 1:2:4 type B1 using stone aggregate 20 mm nominal size complete all as specified and directed.

Supply and fix structural steel work riveted, bolted or welded in built up section, trusses and frame work including cutting, hoisting, fixing in position complete all as specified and as directed.

Material and labour for Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coats applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed.

Providing corrugated GI sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.00mm thick with zinc coating not less than 275gm/m2 complete all as specified and ditected by Engr-in-Charge.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore complete all as specified and directed.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia nominal bore complete all as specified and directed.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal dia complete all as specified and directed.

Providing and fixing 18 mm thick Granite stone slab gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed.

Material and labour for Machine cut cudappah stone slab 20mm to 25mm thick laid over and including cement screed bed of 15mm thick in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two coats) over and including water thinnable priming coat with cement primer complete all as specified and directed.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado including rendering 10 mm thick in cement mortar 1 :4 as backing coat jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, Complete all as specified and as directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, Complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick back filling for pitching including supplying of required materials and consolidation etc stone aggregate 40mm nominal size complete all as specified and directed by Engr-in-Charge.

Material and labour for providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with line sand etc complete all as specified and directed by Engr-in-Charge.

Material and labour for providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame or metal frame work (aluminium snap grid frame work) for flat and sunk /raised surfaces (frame work to be paid separately) complete all as specified and directed.

Supply and fixing anodised aluminium snap grid frame work for plaster of Paris (Gypsum anhydrous) false ceiling complete all as specified and directed by Engr-in-Charge.

Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling complete all as specified and directed.

Material and labour for supply, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated,with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on one face and polymer (Service) coating on other face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Aluminium frame work for ACP cladding is deemed to be include in the quoted rates. Size of the metal frame shall be executed as per directions of Engr-in-Charge. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per item description, as specified, and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm complete all as specified and directed by Engineer-in-charge

Dismantling old plaster and raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Engr-in-Charge

Material and Labour for 15 mm cement plaster on the rough side of single or half brick wall in CM 1:4 using WPC @ 0.2% by weight of cement as per manufacturer instructions and finished even and fair complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound complete all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed.

Material and labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old preprared surfaces complete all as specified and directed.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead of dia upto 150 mm pipe complete all as specified and directed.

Supplying, assembling, lowering and fixing in vertical position in bldgs unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 110 mm nominal size dia complete all as specified and directed.

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge.

Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with ceiling compound grade A thickness of concrete slab is 100mm complete as per direction of the Engineer-in-Charge.

VENKATESHWARA ENTERPRISES (BID ID -3291085)

M/S NILESH BUILDERS (BID ID -3291132)

Rays Breakers (BID ID -3290857)

S.K.HARAL (BID ID -3289153)

Sunil Constructions (BID ID -3291129)

AJAY ENTERPRISES (BID ID -3290607)

Vipul Enterprises (BID ID -3291297)

M/s S.R lahoti (BID ID -3291207)