Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-Finance | L1 | Accepted-Finance Lower rate | |
| 2 | L2₹15.6 L+₹82,936.30 (5.63%)Accepted-Finance | L2 | Accepted-Finance Higher rate | |
| 3 | L3₹16.7 L+₹2.0 L (13.5%)Accepted-Finance | L3 | Accepted-Finance Higher rate |
| Sl No | Description | Qty | Unit | ATHMIKA ENTERPRISES L3 | MADURA ENGINEERING WORKS L1 | MUTHU ENGINEERING WORKS L2 |
|---|---|---|---|---|---|---|
| 1.00 | I. Material portion (Contractor scope) : ISMC 150 X 75 | 0.75 | MT | 86,400 ₹76,464 | 76,800 ₹67,968 Lowest | 80,000 ₹70,800 |
| 2.00 | M.S. plate 6mm thick | 2.31 | MT | 1,13,000 ₹3,08,015.4 | 1,00,200 ₹2,73,125.16 Lowest | 1,04,400 ₹2,84,573.52 |
| 3.00 | II. Labour Portion : Lifting the scrapper feeder with the help of hydraulic pack to required height to dismantling the worn-out rails, as directed by the Engineer in-charge and including consumables and T&P's. | 4 | Opn. | 19,300 ₹91,096 | 17,157 ₹80,981.04 Lowest | 18,000 ₹84,960 |
| 4.00 | Dismantling the existing rails from the base plate, removing by means of gas cutting, dismantling the MS lugs by means of gas cutting, transporting the scraps from site and devoluted to stores and including consumables and T&P’s. | 92 | Meter | 900 ₹97,704 | 782 ₹84,893.92 Lowest | 850 ₹92,276 |
| 5.00 | Laying MS lugs so as to provide MS plate using 12mm dia RTS rod, place it at an interval of 50cm centre, distances, levelling aligning the lugs as per the direction of Engineer incharge and including consumables and T&P’s. | 92 | Meter | 1,500 ₹1,62,840 | 1,324 ₹1,43,733.44 Lowest | 1,400 ₹1,51,984 |
| 6.00 | Laying the rail base plate over the MS lugs setting aligning the top surface using sprit level and water level weld with MS lugs and incharge and including consumables and T&P’s. | 92 | Meter | 1,200 ₹1,30,272 | 1,050 ₹1,13,988 Lowest | 1,100 ₹1,19,416 |
| 7.00 | Laying the C50 Mn1 Steel 50x50 square bar over the base plate setting, aligning to suit the site condition maintain straightness along the length welding the rails with base plate on two side again aligning and finishing and including consumables and T&P’s. | 92 | Meter | 1,550 ₹1,68,268 | 1,370 ₹1,48,727.2 Lowest | 1,420 ₹1,54,155.2 |
| 8.00 | Dismantling the existing travelling rail of the scrapper feeder and clinker grinder after breaking the concrete and replacing the rails of 4 metre length and filling with concrete and consumables and T&P’s. | 8 | Opn. | 26,500 ₹2,50,160 | 23,500 ₹2,21,840 Lowest | 24,500 ₹2,31,280 |
| 9.00 | Dismantling of corroded portions of the Power pack in and the removal and devolution of scraps including consumables and T&P’s. | 1.5 | MT | 13,800 ₹24,426 | 12,300 ₹21,771 Lowest | 12,800 ₹22,656 |
| 10.00 | Fabrication and erection of Power pack and supporting structure including consumables and T&P’s. | 2.91 | MT | 71,500 ₹2,45,516.7 | 63,500 ₹2,18,046.3 Lowest | 68,000 ₹2,33,498.4 |
Tender Value
Refer Docs
EMD Value
₹11,000
Closing Date
28 Sept 2026, 2:00 pmClosed
CE/NCTPS-I
CE/NCTPS-I
NCTPS I SE M II Circle AHP Dn Unit I 2026 27 O H BAH Dismantling the existing worn out travel rails for BAH scrapper feeder and clinker Grinder erection and commissioning of travel rails erection of new bed frame with concrete pedestals
2026_EB_706918_1
CE/NCTPSI/SE/MII/SpNo07/26-27
Open Tender
Power/Energy Projects/Products
Works
45 days
NCTPS Chennai
Refer the tender documents
3 documents required · 3 mandatory
₹0
₹11,000
Yes
14 Oct 2026
22 Sept 2026
29 Sept 2026
22 Sept 2026
28 Sept 2026
22 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | I. Material portion (Contractor scope) : ISMC 150 X 75 | 0.75 | MT | 27,200 | ₹20,400 |
| 2 | M.S. plate 6mm thick | 2.31 | MT | 27,200 | ₹62,832 |
| 3 | II. Labour Portion : Lifting the scrapper feeder with the help of hydraulic pack to required height to dismantling the worn-out rails, as directed by the Engineer in-charge and including consumables and T&P's. | 4 | Opn. | 27,200 | ₹1,08,800 |
| 4 | Dismantling the existing rails from the base plate, removing by means of gas cutting, dismantling the MS lugs by means of gas cutting, transporting the scraps from site and devoluted to stores and including consumables and T&P’s. | 92 | Meter | 27,200 | ₹25,02,400 |
| 5 | Laying MS lugs so as to provide MS plate using 12mm dia RTS rod, place it at an interval of 50cm centre, distances, levelling aligning the lugs as per the direction of Engineer incharge and including consumables and T&P’s. | 92 | Meter | 27,200 | ₹25,02,400 |
| 6 | Laying the rail base plate over the MS lugs setting aligning the top surface using sprit level and water level weld with MS lugs and incharge and including consumables and T&P’s. | 92 | Meter | 27,200 | ₹25,02,400 |
| 7 | Laying the C50 Mn1 Steel 50x50 square bar over the base plate setting, aligning to suit the site condition maintain straightness along the length welding the rails with base plate on two side again aligning and finishing and including consumables and T&P’s. | 92 | Meter | 27,200 | ₹25,02,400 |
| 8 | Dismantling the existing travelling rail of the scrapper feeder and clinker grinder after breaking the concrete and replacing the rails of 4 metre length and filling with concrete and consumables and T&P’s. | 8 | Opn. | 27,200 | ₹2,17,600 |
| 9 | Dismantling of corroded portions of the Power pack in and the removal and devolution of scraps including consumables and T&P’s. | 1.5 | MT | 27,200 | ₹40,800 |
| 10 | Fabrication and erection of Power pack and supporting structure including consumables and T&P’s. | 2.91 | MT | 27,200 | ₹79,152 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
BOQ_849630.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .