Essential repair work such as Painting one coat, Electrical, Plumbing and other civil repair works to Academic Block II and III in view of Basic training for directly recruited 621 SI at TNPA Campus, Oonamanchery near Vandalur in Chennai city

Amount

31) Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand)

74) Labour charges for assembling & fixing of ceiling fan including tools and tackels etc all complete

112) Supply and Fixing of 300mm sweep AC exhaust fan

ANNEXURE 21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

23.5.9) Supplying and fixing of Aluminium window openable 0.45 x 1.35m (Two leaves) including 4mm pin headed glass, hinges tools and tackels

29.1.1) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works over cement mortor 1:3 (One of cement and three of crushed stone sand) 20mm thick

32.1.1) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cm x 23cm x 20mm thick laid over weathering course in CM 1:3, 12mm thick

32.1.2) Pointing the Pressed Tile over the roof with cement mortar 1:3 (One of cement and three of crushed stone sand)

37.3.1) White washing two coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects.

53.5.1) Supplying and fixing of porcelain wash hand basin superior variety of size 550 x 400mm with all accessories. (Without pedastal)

54.1.1) Supplying and fixing of 15mm dia half turn C.P Long body Tap

54.2.1) Supplying and fixing of 15mm dia half turn C.P Short body Tap

56.3.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade 'P' or 'S' trap In Ground floor

58.5.2) Supplying of 100mm dia PVC Grating of best approved quality with ISI mark including fixing in position complying with relevant standard specifications

61.3.1) Supplying of following UPVC specials a) 25mm dia UPVC Tee

b) 25mm dia UPVC FTA

c) 25mm dia Ball Valve

d) 25mm dia UPVC pipe

e) 25mm dia Coupling

f) 25mm dia Elbow

70.5.2) Supplying and fiixng of 4'-00" long 18watts Crystal glass LED tube light of approved make (ISI) inclduing cost and labour charges for fixing etc all complete.

77.3.1) Supplying of 100 amps MCB 4pole isolator of approved brand etc all complete

82.3.2) Supply and delivery of 30W LED street light fittings with LED (Higher end) (Light Emitting diode) with all necessary materials and fixing street light fitting in EB pole / wall

88.3.1) Supplying and laying of Polished Rajasthan Kota Stone Slabs of 20mm thick with Machine Cut Edges of size below 2’0” x 2’0” for flooring in CM 1:3

207.3.7) Painting the old walls with one coats of 1st class ready mixed plastic emulsion paint of best approved quality colour and shade, thorough scrapping the old surface

207.5) Painting the old wood work with one coat of approved Ist class synthetic enamel paint including thorough scrapping the old paint using sand paper

207.7) Painting the old iron work with one coat of approved Ist class synthetic enamel paint including thorough scrapping the old paint using sand paper

209.3.3) Chipping the existing expansion joint treatment (30mm x 15mm) provided at places using air blower to remove dust particles and racking the bituminous pad with foam pad size 12mm for the depth requried and mixing the part A and B of Polysulphide sealents and fixing the new expansion joints provided

216) Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures in all floors and clearing the debries away from the site

Electrical Materials 219.6) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades without regulator a) 48" Electric fan 1200mm sweep

242.2.2) Dismantling the damaged Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs/shahabad flooring without affecting the adjacent structures in all floors and including clearing debries 2km away from the site

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb

255.8.3) Supply and fixing of LED 4000K 2' x 2' Square Type Recessed fitting of approved brand for False ceiling etc all complete

344.5) Supplying and fixing of Plain Sheet Glass - 5.5mm thick for Aluminium door & windows all complete and as directed by departmental officers

359.3.1) Supply and lying superior variety Designer Tiles (Concrete Tiles not less than 23mm) for flooring in cm 1:3 (one of cement and three of crushed stone sand) 20mm thick,

362.2.2) Supplying and fixing of nano polish vitrified tiles for flooring and other similar works over cement mortor 1:3 (One of cement and three of crushed stone sand) 20mm thick

384.1) Supply and fixing of 10 litre capacity Handle type PVC low level flushing tank (cistern - wall mounting type) of superior variety (white) with all fittings

384.2) Supplying of EWC Seat cover (white colour)

451.3.2) Supplying and fixing of best approved quality following CP water supply/sanitary fittings confirming to I.S. specification a) CP pillar cock of 15mm dia of approved brand

b) CP angle cock of 15mm dia of approved brand

451.3.4) Supply and fixing of following Stainless steel water supply fittings a) SS Health Faucet approved quality with ISI mark

b) SS Pad lock with required screws & Lock and key arrangements (for aluminium door) of approved brand like godrej Nav tel 6 lever with 3 keys

K. BASKARAN & CO (BID ID -1133881)

K.Saravanan (BID ID -1131810)

dp constructions (BID ID -1133106)

S.S. ENTERPRISES (BID ID -1133310)

R.SURESH BABU (BID ID -1133674)

P.MANOHARAN (BID ID -1133866)

Bidder Name

R.SURESH BABU

P.MANOHARAN

dp constructions

K.Saravanan

KUMARAN ASSOCIATES

S.S. ENTERPRISES

K. BASKARAN & CO