Construction of Balance Work for Police Station and Staff Qtrs. at Jyoti Nagar, Delhi

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Civil DSR Items based on DSR 2018

EARTH WORK Earth excavation

DSR No: 2.6.1: Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

All kinds of soil

DSR No: 2.10.1.2: Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.

All kinds of soil

Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia

DSR No: 2.25: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

DSR No: 2.27: Supplying and filling in plinth with Jamuna sand under floors including watering, ramming consolidating and dressing complete.

CONCRETE WORK

DSR No: 4.1: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

(a) DSR No: 4.1.3: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

(C) DSR No: 4.1.8: 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

(d) DSR No.: 4.1.10: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

REINFORCED CEMENT CONCRETE

DSR No: 5.9: Centering and shuttering including strutting, propping etc. and removal of form for :

(a) DSR No: 5.9.1: Foundations, footings, bases of columns, etc. for mass concrete.

(b) DSR No: 5.9.2: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

(C)DSR No: 5.9.3: Suspended floors, roofs, landings, balconies and access platform.

(d) DSR No: 5.9.4: Shelves (Cast in situ)

(e ) DSR No: 5.9.5: Lintels, beams, plinth beams, girders, bressumers and cantilevers.

(f) DSR No: 5.9.6: Columns, Pillars, Piers, Abutments, Posts and Struts.

DSR No: 5.22: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

DSR No: 5.22.6: Thermo-Mechanically Treated bars.

DSR No: 5.22.A: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

DSR No: 5.22.A.6: Thermo-Mechanically Treated bars.

DSR No: 5.30: Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

DSR No: 5.33: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).

(a) DSR No: 5.33.1: All works upto plinth level.

(b) DSR No: 5.33.2: All works above plinth level upto floor V level.

DSR No: 5.43.2: Providing and fixing in position stainless steel Grade(304)angle of size 40x40x4 mm to support stone cladding work including making holes in the angle and fixing to be done with dash fastener with the existing wall.

BRICK WORK

DSR No: 6.4: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

DSR No: 6.4.2: Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR No: 6.13: Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

DSR No: 6.13.2: Cement mortar 1:4 (1 cement :4 coarse sand)

DSR No: 6.15: Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

GRANITE WORK / MARBLE WORK

DSR No.: 8.2.2: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colous and shade

DSR No.: 8.2.2.2: Area of slab over 0.50 sqm.

DSR No: 8.14.1: Stone work (machine cut edges) for wall lining etc.(veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)

DSR No: 8.14.1.4: 40 mm thick.

DSR No: 8.31: Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

DSR No: 8.5: Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

DSR No: 8.8.1: Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.

Wedge expansion type

DSR No: 8.8.1.1: Fastener with threaded dia 6 mm

WOOD & PVC WORK

DSR No: 9.12: Extra for providing frosted glass panes 5 mm thick instead of ordinary float glass panes 5 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

DSR No: 9.21: Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

DSR No: 9.21.1: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

DSR No: 9.48: Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

DSR No: 9.48.1: Fixed to steel windows by welding

DSR No: 9.63: Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:

DSR No: 9.63.4: (a) 100x10 mm

DSR No: 9.68: Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc.

DSR No: 9.68.3: (a) 200 mm long, weighing not less than 120 gms

DSR No: 9.96: Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less thangrade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. complete:

DSR No: 9.96.1:(a) 300x16 mm

DSR No: 9.96.2: (b) 150x10 mm

DSR No: 9.97: Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete:

DSR No: 9.97.2: (a) 250x10 mm

DSR No:9.97.4: (b) 150x10 mm

DSR No: 9.100: Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

DSR No: 9.100.1: (a) 125 mm

DSR No: 9.100.2: (b) 100 mm

DSR No: 9.101: Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

DSR No: 9.101.2: (a) Twin rubber stopper

DSR No: 9.119: Providing and fixing factory made P.V.C .door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

DSR No: 9.120: Providing and fixing to existing door frames.30mm thick factory made solid both side Pre- laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded Pre­laminated PVC 'c' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shail be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of5mm thick both side Pre-laminated PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'c' Channel using P"C solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer's specification & drawing (for W.C. and bathroom door shutter).

DSR No: 9.120.2: (a) 30 mm thick pre laminated PVC door shutters

DSR No: 9.136: Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 120 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).

DSR No: 9.137: Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge.

DSR No: 9.138: Providing and fixing glazing in fire resistant door shutters, fixed panels and partition etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (Zinc coating not less than 120 gm/m2) of size 20x30mm screwed with M4x38 mm S.S. Screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, and special ceramic tape of 5x20 mm size etc. complete in all respect as NBC 2016, IS 16231 (3) 2016 and as per direction of Engineer-in-charge with glass of required thichness having 60 minutes of fire resistance both integrity and radiation control (EW 60) and minimum 20 minutes of insulation (EI 20). The manufacturer have to give test report / certification of fire glass and the glass should have the strength showing the value of E, EW and EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits Labs as per ISO / IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200mm (wxh) or 2.42sqm.

DSR No: 9.139: Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

STEEL WORK

DSR No: 10.11: Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all memberssuch as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

DSR No: 10.11.1: Fixing with 15x3 mm lugs 10 cm long embedded in cement

DSR No: 10.25: Steel work welded in built up sections/ framed work ncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

DSR No: 10.25.2: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

DSR No: 10.29.1: Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.

FLOORING

DSR No: 11.5: 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

DSR No: 11.13: Providing and fixing glass strips in joints of terrazo/cement concrete floors.

DSR No: 11.13.1: (a) 40 mm wide and 4 mm thick.

DSR No: 11.23: Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in- charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :

DSR No: 11.23.2: (a) Raj Nagar plain.

DSR No: 11.23.5: (b) Udaipur green marble

DSRNo: 11.25: Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre .

DSR No: 11.26: Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

DSR No: 11.26.1: (a) 25 mm thick.

DSR No: 11.27: Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

DSR No:11.31: Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

DSR No: 11.37: Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm 926.90

DSR No: 11.40: Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

DSR No: 11.41: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

DSR No: 11.41.2: Size of Tile 600x600 mm

DSR No: 11.46: Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to IS 15622, of approved make in all colours and shade in skirting, riser of the steps. Over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joint with white cement and matching pigments etc. complete.

DSR No: 11.46.2: Size of Tile 600x600 mm.

R00FING

DSR No: 12.41: Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.

DSR No: 12.41.2: (a)110 mm diameter

DSR No: 12.42: Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.

a)Coupler-

DSR No: 12.42.1.2: (a) 110mm diameter

b)Bend-87.5deg-

DSR No: 12.42.5.2: (b) 110mm diameter

c)Shoe-

DSR No: 12.42.6.2: (C ) 110mm shoe

DSR No: 12.43.2 - Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

DSR No: 12.43.2: (a) 110mm dia

DSR NO: 12.45: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to GI. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long GI. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,including jointing and finishing to a flush finish of tapered and square edges of the board with

DSR NO: 12.45.1: 12.5 mm thick tapered edge gypsum plain boardconforming to IS: 2095- (Part I) : 201(Part I) : 2011 (Board with BIS

FINISHING

DSR No: 13.1: 12 mm cement plaster of mix :

DSR No: 13.1.2: (a) 1:6 (1 cement : 6 fine sand)

DSR No: 13.2: 15 mm cement plaster on the rough side of single or half brick wall of mix :

DSR No: 13.2.2: (b) 1:6 (1 cement : 6 fine sand)

DSR No: 13.16: 6mm cement plaster of mix

DSR No: 13.16.1: (C ) 1:3 (1 cement : 3 fine sand)

DSR No: 13.44.1: Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/ 10 sqm)

Applying priming coat :

DSR No: 13.50.1: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

DSR No: 13.61: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.

DSR No: 13.61.1: Two or more coats on new work.

DSR No: 13.80: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

DSR No: 13.72: Washed stone grit plaster on exterior walls of height upto 10 metre above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately).

DSR No: 13.73: Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer- in-charge :

DSR No: 13.73.1: 15 mm wide and 15 mm deep groove.

DSR No: 13.74: Extra for washed grit plaster on exterior walls of height more than 10m from ground level for every additional height of 3 m or part thereof.

DISMANTLING AND DEMOLISHING

DSR No: 15.60: Disposal of building rubbish / malba /similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

DSR No: 15.7: Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

DSR No: 15.7.4: In cement mortar.

ROAD WORK

DSR No: 16.43: Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria,

providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting, mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately) Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.

DSR No: 16.43.1: (a) Cement concrete prepared with batch mixing machine.

DSR No: 16.44: Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.

DSR No: 16.46: Providing and laying in position bitumen hot sealing compound for expansion joints etc.

DSR No: 16.46.1: Using grade ‘A’ sealing compound.

DSR No: 16.53: Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge,

with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately).

DSR No: 16.68: Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

DSR No: 16.69: Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

SANITARY FIXTURES

DSR No: 17.1: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

DSR No: 17.1.1: White Vitreous china Orissa pattern W.C. Pan of size 580x440mm with integral type foot rests.

DSR No: 17.3: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

DSR No: 17.3.1: W.C. pan with ISI marked white solid plastic seat and lid.

DSR No: 17.7: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

DSR No: 17.7.1: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

DSR No: 17.10: Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain board

DSR No: 17.10.1.1: 510x1040 mm bowl depth 250mm

DSR No: 17.28: Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.

DSR No: 17.28.2.1: Flexible pipe 32mm dia

DSR No: 17.29: Providing & Fixing 100mm dia CP brass Jali.

DSR No: 17.29: 100 mm dia.

DSR No: 17.31: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

DSR No: 17.35: Providing and fixing soil, waste and vent pipes.

100mm dia

DSR No: 17.35.1.2: centrifugally cast (spun) iron socketed pipe as per IS 3989.

DSR No: 17.37: Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

DSR No: 17.37.1: For 100 mm dia pipe

DSR No: 17.39: Providing and fixing plain bend of required degree.

100 mm dia

DSR No: 17.39.1.2: sand cast iron S&S as per IS 3989

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

DSR No: 17.43.1.2: Sand cast iron S&S as per IS - 3989

DSR No: 17.44: Providing and fixing single equal plain junction of required degree.

DSR No: 17.44.1.2: Sand cast iron S&S as per IS - 3989

DSR No: 17.56: Providing and fixing terminal guard.

DSR No: 17.56.1.2: sand cast iron S&S as per IS 3989

DSR No: 17.58: Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter.

DSR No: 17.58.1: (a) 100mm

DSR No: 17.60: Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.

DSR No: 17.60.1: (a) 100 mm inlet and 100 mm outlet -cast iron S&S as per IS 3989.

Providing and fixing SS towel rail complete with fixed to rawl plugs 50mm (designation 10 nos) & SS screws 40mm size.

DSR No: 17.73.1: (a) SS Towel rail 600 mm.

WATER SUPPLY

DSR No: 18.7: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

DSR No: 18.7.2 : (a) 20 mm normal outer dia pipes.

DSR No: 18.7.3 : (b) 25 mm normal outer dia pipes.

DSR No: 18.7.4 : (C ) 32 mm normal outer dia pipes.

DSR No: 18.7.5 : (d) 40 mm normal outer dia pipes.

DSR No: 18.7.6 : (e) 50 mm normal outer dia pipes.

DSR No: 18.8: Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.

Concealed work including cutting cheases and making good the walls etc.

DSR No: 18.8.2: (a) 20 mm normal outer dia pipes.

DSR No: 18.8.3: (b) 25 mm normal outer dia pipes.

DSR No: 18.8.4: (C ) 32 mm normal outer dia pipes.

DSR No: 18.10: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

DSR No: 18.10.4: (d) 32mm dia nominal bore

DSR No: 18.10.5: (e) 40mm dia nominal bore

DSR No: 18.10.6: (f) 50mm dia nominal bore

DSR No: 18.10.2: (g) 20 mm dia normal bore

DSR No: 18.16: Providing and fixing brass stop cock of approved quality :

DSR No: 18.16.1: 15 mm nominal bore

DSR No: 18.16.2: 20 mm nominal bore

DSR No: 18.17: Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end).

DSR No: 18.17.1: 25 mm dia nominal bore

DSR No: 18.17.2: 32 mm dia, nominal bore

DSR No: 18.17.3: 40 mm dia, nominal bore

DSR No: 18.17.4: 50 mm dia, nominal bore

DSR No: 18.17.5: 65 mm dia, nominal bore

DSR No: 18.17.6: 80 mm dia, nominal bore

DSR No: 18.21: Providing and fixing unplasticised PVC connection pipe with brass unions:

30 cm length

DSR No: 18.21.1.1: 15 mm nominal bore.

DSR No: 18.22: Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet.

DSR No: 18.22.1: 100 mm diameter

DSR No: 18.46: Providing and fixing GI. Union in GI. pipe including cutting and threading the pipe and making long screws etc. complete (New work):

DSR No: 18.46.6: (a) 50 mm nominal dia

DSR No: 18.46.7: (b) 65 mm nominal dia

DSR No: 18.46.8: (C) 80 mm nominal dia

DSR No: 18.46.2: (f) 32 mm nominal dia

DSR No: 18.48: Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

DSR No: 18.49: Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931.

DSR No: 18.49.1: 15 mm nominal bore.

DSR No: 18.50.1: Providing and fixing CP Swan Neck Pillar Cock 15mm nominal bore.

DSR No: 18.51: Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms.

DSR No: 18.51.1: (a) 15 mm nominal bore.

DSR No: 18.52: Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

DSR No: 18.52.1: (a) 15 mm nominal bore

DSR No: 18.53: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.

DSR No: 18.53.1: (a) 15mm nominal bore

DSR No: 18.74: Providing & Fixing CP PVC health faucet of approved quality with hanger bracket complete.15mm nominal bore with 75cm length

DSR No: 18.74.2: (a) 15mm nominal bore with 75cm length

DSR No: 18.75: Providing and fixing G.I Tank nipple with two rubber washer for polyethylene water storage tank.

DSR No: 18.75.1: (a) 50 mm nominal dia

DSR No: 18.75.2: (b) 65 mm nominal dia

DSR No: 18.75.3 (C) 80 mm nominal dia

DRAINAGE

DSR No:19.1: Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing ofjoints etc. complete:

DSR No:19.1.1: 100 mm diameter

DSR No: 19.4.3: Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design.

DSR No: 19.4.3.2: With Sewer bricks conforming to IS:4885

DSR No: 19.6: Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.

DSR No: 19.6.2: 150 mm dia RCC pipe

DSR No: 19.6.3: 250 mm dia RCC pipe

DSR No: 19.7: Construction brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

DSR No: 19.7.1: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

DSR No: 19.7.1.2: (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

DSR No: 19.7.2: Inside size 120 X 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)

DSR No: 19.7.2.2: With Sewer bricks conforming to IS:4885

DSR NO: 19.15: Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

DSR NO: 19.15.1: (a) With 20x20 mm square bar

ALUMINIUM WORK

DSR No: 21.1: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately

DSR No: 21.1.1.2: (a) Powder coated aluminium (minimum thickness of powder coating 50 micron)

DSR No: 21.1.2.2: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (b) Powder coated aluminium (minimum thickness of powder coating 50 micron)

WATER PROOFING

DSR No: 22.1: Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of: i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

DSR No: 22.1.1: (a) Using rough kota stone.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer- in-charge :

DSR No: 22.2.1: (a) Using rough kota stone.

DSR No: 22.3: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :-

(i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

(ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.

(iii) IIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area.

DSR No: 22.3: (a) (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)

DSR No: 22.7: Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved

a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.

b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

DSR No: 22.7.1: With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Non- Schedule Items (Civil)

NS-1: Providing and laying light weight foam concrete of density 1000kg/cum in sunken portion of WCs, bathroom etc. all complete and as directed

NS-2: Supply of sapplings with thick stem, bushy and healthy with proper root system, planting and maintaining as specified including replacing the dead plants, if any.

(a) Alstonia Scholaris (2.50 to 3.00 M Height)

(b) Areca palm (branched) (2.50 to 3.00 M Height)

(c ) Delonix Regia (Gulmohar) (2.50 to 3.00 M Height)

(d) Polyalthia Longifolia Pendula(Devdaru Ashok) (2.50 to 3.00 M Height)

(e ) Scheichera Trijuga/Kusum (2.50 to 3.00 M Height)

NS-3: Providing & fixing of C.P. brass deck mounted sink mixer with C.P. wall flange, swinging cast spout complete as required.

NS-4: Providing and fixing M.S. puddle flanges fabricated out of 6 mm thick M.S. plate of size 200 x 200mm plus dia of pipe of 750 mm long pipe pieces to R.C.C. water tanks / R.C.C. walls. The entire fitting shall be hot dipped galvanised.

(a) 25mm dia

(b) 50mm dia

(C ) 65mm dia

(d) 80mm dia

(e ) 100mm dia

(f) 150mm dia

NS-5: Providing, fixing, testing and commissioning of pressure vessel for pressurization of fire system complete with pressure switches with isolation valves, pressure gauge with isolation valve, valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required.

(a) 450mm dia and 1800 mm Height

(b) 450mm dia and 2000 mm Height

NS-6: Supply, installation, testing and commissioning of Down comer pump comprising of the following :

(i) Horizontally mounted end suction centrifugal pump, suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ A.C supply, complete with flexible coupling and coupling guard as required. pump having C.I. body, bronze impeller and S.S. Shaft with mechanical seal, capable for delivering 450 LPM of water at 35 mts.head(7.5hp) to ensure a minimum pressure of 3.5kg/cm2 at the farthest hydrant. Complete with necessary pressure gauge with gun metal shut off cock on delivery side. The pump should meet the condition of Local fire Authority).

(ii) Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 HZ AC supply for the above pump with a synchronous speed of 2900 R.P.M. with flexible coupling and coupling guard etc. as required.

(iii) Common base plate for (a) and (b) from M.S. channel as required size.

(iv) Suitable cement concrete foundation with plaster, Antivibration arrangement of cushy foot mounting.

(a) Capacity-450 lpm. Head-35m

(b) Capacity-900 lpm. Head-35m

NS-7: Providing, laying, jointing and testing of following sizes of pipes conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, flanges, rubber gaskets, nuts bolts, washer. And fixing the pipe on floor / wall /ceiling with suitable size clamps, hangers, structural steel supports as per specification including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. Pipe shall be MS black as per IS-1239 heavy grade and MS 'C' class fittings.Providing two coats of synthetic enamel paint of approved shade over a coat of primer including painting of legends both direction arrow as per the approval of the architects / consultants.

For Fire System - M.S. `C' Heavy class pipe

(a) 50 mm dia

(b) 80 mm dia

C ) 150mm dia

NS-8: Supply and fixing gun metal single headed internal hydrant valve with instantanious stainless steel coupling of 63 mm dia. With cast iron wheel ISI marked type A with 80 mm dia.flanged inlet with ABS cap and chain complete with all accessories etc. as required .

NS-9: Providing & fixing swinging type First Aid hose reel in red colour with 36 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required.

NS-10: Providing & fixing Non per colating flexible hose (RRL type – A) ISI marked (IS:636 Type A) 63 mm dia x 15 m long complete with ISI marked Male and female coupling (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 Sq.mm.copper wire.brusting pressure not less than 22 Kg/Sqcm. (two nos. for each hydrant- valve)

NS-11: Providing & Fixing Gun-metal 63 mm dia short size branch pipes with 20 mm dia nozzle with 63 mm instantaneous coupling ISI marked (IS:903)

NS-12: Providing and fixing standard firemans axe with heavy rubber handle.

NS-13: Providing and fixing 4mm thick glass door of size 2.1m x 1.2x0.6m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitable marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.

NS-14: Providing and fixing Fire Extinguishers (A, B, C type powder) complete with all accessories as per manufacturers specifications.

(a) Capacity 4.5 Kg

(b) Capacity 9 Kg

NS-15: Providing and fixing M.S. Stay & Clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter..

(a) 100mm CI Pipe

Electrical DSR Items based on DSR 2018

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed steel conduit, with modular type switch, modular plate suitable size GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

DSR No:1.3.1: Group A

DSR No: 1.4: Wiring for twin control light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular type switch, modular plate , suitable size GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required

DSR No: 1.5: Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

DSR No: 1.7.2: (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

DSR No: 1.7.4: (b) 2X 6 sq. mm + 1 X 6 sq. mm earth wire

DSR No: 1.7.5: (C ) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

DSR No: 1.7.10: (d) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/ recessed steel/ PVC conduit as required.

DSR No: 1.17.2: (a) 3X 2.5 sq. mm

DSR No: 1.17.21: (b) 3x 4 sq. mm

DSR No: 1.17.30: (c ) 3x6 sq mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

DSR No: 1.18.1:(a) 1 Pair

DSR No: 1.19: Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required

Supplying and fixing of following sizes of steel conduit along with accessories in surface /recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required

DSR No: 1.20.1: (a) 20 mm

DSR No: 1.20.2: (b) 25 mm

DSR No: 1.20.3: (c ) 32 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

DSR No: 1.24.6: (a) Telephone socket outlet

DSR No: 1.24.7: (b) TV antenna socket outlet

DSR No: 1.24.8: (c ) Bell push

DSR No: 1.25: Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

DSR No: 1.26: Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

DSR No: 1.27.1: (a) 1 or 2 Module (75mmX75mm)

DSR No: 1.27.2: (b) 3 Module (100 mmX75 mm)

DSR No: 1.31: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

DSR No: 1.32: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

DSR No: 1.38: Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

DSR : 1.53: (a) 1 run of cable

DSR No: 1.57: Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required

Distribution Board

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar,interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB/Isolator)

DSR No: 2.3.3: (a) 12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB/Isolator)

DSR No: 2.4.2: (a) 6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and comissioning etc. as required

DSR No: 2.10.1: (a) Single pole

DSR No: 2.10.2: (b) Single pole and neutral

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

DSR No: 2.13.1: (a) 40A

DSR No: 2.13.2: (b) 63A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with nnections, testing and commissioning etc. as required.

DSR No: 2.14.2: (a) 40 A

DSR No: 2.14.3: (b) 63A

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

DSR No: 1.15.2: (a) 40 A

DSR No: 1.15.3: (b) 63 A

DSR No: 2.21: Providing & fixing M.V.danger notice plates of 200mmX150mm, made of mild steel, at least 2 mm thick, & vitreous enameled white on both sides, and with inscriptions in signal red colour on front side as required.

Cable tray

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

DSR No: 4.1.4: (a) 300 mm width X 50 mm depth X 1.6 mm thickness

DSR No: 4.1.11: (b) 600 mm width X 62.5 mm depth X 2.0 mm thickness

Earthing

DSR No: 5.4: Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 'enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

DSR No: 5.6: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as

DSR No: 5.14: Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required.

DSR No: 5.15: Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

DSR No: 5.16: Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Lightining conductor

DSR No: 6.2: Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc complete as required.

DSR No: 6.3: Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.

DSR No: 6.4: Jointing copper I G.l. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting I nut bolting/ sweating and soldering etc. as required

DSR No: 6.7: Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)

DSR No: 6.8: Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For vertical run)

MV CABLE LAYING

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required

DSR No: 7.1.1: (a) Upto 35 sq. mm.

DSR No: 7.1.2: (b) Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

DSR No: 7.5.1: (a) Upto 35 sq. mm

DSR No: 7.5.2: (b) Above 35 sq. mm and upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required

DSR No: 7.7.1: Upto 35 sq. mm (clamped with 1mm thick saddle)

MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

DSR No: 9.1.1: (a) 2 X 6 sq. mm (19mm)

DSR No: 9.1.20: (b) 3½ X 25 sq. mm (28mm)

DSR No: 9.1.22: (C ) 3½ X 50 sq. mm (35mm)

DSR No: 9.1.33: (d) 4 X 16 sq. mm (28mm)

DSR: 17.1.1: Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required.

DSR No: 17.2.3: Supplying, installation, testing & commissioning of repeater panel wih 320 character/Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

DSR No: 17.2.4: Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required

DSR No: 17.2.7: Supplying, installation, testing & commissioning of fault isolator complete with base as required.

DSR No: 17.2.10: Supplying, installation, testing & commissioning of addressable fire control module complete as required.

DSR No: 17.2.14: Supplying, installation, testing & commissioning of addressable manual call point complete as required

DSR No: 17.2.15: Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

DSR No: 17.2.17: Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

DSR No: 17.2.19: Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

DSR No: 17.3.2: Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required

DSR No: 17.5.2: Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. 1

DSR No: 17.5.3.1: Speaker cable Single pair, 2-core, 1.5 sqmm

NSR Items (Electrical)

MR-1: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable with modular type switch, modular plate on in existing surface/ recessed steel conduit and existing suitable size GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

MR-2: Wiring for twin control light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable with 2 way modular type switch, modular plate in existing surface/ recessed steel conduit & on existing GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required

MR-3: Supplying and fixing suitable size modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc on existing GI box as required

MR-4: Supplying and fixing suitable size modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections on existing GI box etc. as required.

MR-5: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel conduit as required.

(a) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

(b) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

MR-6: LIGHT AND FIXTURES

MR-6: (a) Supply ,installation, testing & commissioning of 20 Watt, 4ft Linear LED luminaire delivering an initial system lumen of 2000 lumens & the luminaire shall be with system efficacy ≥ 100 lm / W. The luminaire Housing shall be made of extruded Aluminium & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70 Criteria, IP20. . The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV. Make-Wipro Cat No.: LL20-281-XXX-65-AL1 or equivalent to approve make list.

MR-6: (b) Supply, installation, testing & commissioning of 10 watt Bulk Head Luminare delivering an initial system lumen of 700 lumens & the luminaire shall be with system efficacy ≥ 70 lm / W. Housing: Die Cast Aluminium. IP65 , Diffuser : OPAL Polycarbonate. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Wipro Cat No.: LW07-141-XXX-57-XX or equivalent to approve make list

MR-6: (C ) Supply, installation, testing & commissioning of 18 watt Surface mounted Round Led Downlighter delivering an initial system lumen of 1527 lumens & the luminaire shall be with system efficacy ≥ 80 lm / W. Housing: Die Cast Aluminium. IP20 , Optics: PMMA LGP/Polysterene Diffuser. The operating CCT shall be 6000K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. . The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Make-Wipro Cat No.: LD80-171-XXX-60-SM or equivalent to approve make list

MR-6: (d) Supply, installation, testing & commissioning of 12 watt Surface mounted Round Led Downlighter, the luminaire shall be with system efficacy ≥ 80 lm / W. Housing: Die Cast Aluminium. IP20 , Optics: PMMA LGP/Polysterene Diffuser. The operating CCT shall be 6000K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Wipro Cat No.: LD80-101-XXX-60-SM

MR-6: (e ) Supply installation testing and comissioning of Wall Bracket Light along with E 27 Bulb of 9 watt. Make- WIPRO CAT LM91-L180-CRWH+ E27 bulb or equivalent to approve make list

MR-6: (f) Supply, installation, testing & commissioning of,10 watt, 2ft Linear LED luminaire delivering an initial system lumen of 903 lumens & the luminaire shall be with system efficacy ≥ 90 lm / W. The luminaire Housing shall be made of PC & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70 Criteria, IP20. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Make-Wipro Cat No.: LL20-111-XXX-65-NE3 or equivalent to approve make list

MR-6: (g) Supply installation testing and comissioning of 9W Surface Mounted IP65 Downlighter for Balcony Make- WIPRO CAT LW01-101-XXX-60-XX or equivalent to approve make list.

MR-7: Supply, Installation, Testing & commissioning of 50 pair telephone tag block (crone connector type ) in PVC Box complete as required.

MR-8: Supply,installation,testing and commissioning of 1200 mm sweep, 5 star rating, 3 blade,double ball bearing ceiling fan including all accessories complete as required.

MR-9 (a): Supply installation,testing and commissioning of 1x 200 mm Exhaust fan , Plastic body with louver, etc complete as required. MAKE- Havells 200 mm Ventil Air-DX White or equivalent make as per list of approved makes

MR-9 (b): Supply installation,testing and commissioning of 300 mm, 1400 RPM, heavy duty metal body Exhaust fan , etc complete as required. Make-Crompton EXHD300-4-1 or equivalent make as per list of approved makes

MR-10: SUPPLY OF POLES

MR-10 (a) Supply, erection , Testing and commoissioning of fancy External Light Pole dia 76 mm height 3.5 Meter, including suitable concrete foundation,bolt as complete required. Make-Havells Cat. No. LHMP011350199 or equivalent approved make list.

MR-10 (b) Supply, erection , Testing and commoissioning of Pole light 30 watt LED light fixture complete as required Make-Havells Cat. No ENDURA PEARLSL30WLED757SASYTOPCMP or equivalent to approved make list.

MR-11: Cables

MR-11: Supply of following sizes of 1.1 KV grade multicore Aluminium armd conductor XLPE insulated steel armoured cable confirming to IS :7908 (Part-1)/1988 with latest amendments & complete all as required.

MR-11 (a) 50 Sq.mm 3.5 core

MR-11 (b) 25 Sq.mm 4 core

MR-11 (c ) 16 Sq.mm 4 core

MR-11 (d) 6 Sq.mm 4 core

MR-11 (e ) 6 Sq.mm 2 core

MR-12: Lift Panel

BUS BAR

TPN Aluminium bus bar with heat Shrink Sleeve rated for 160A.

OUTGOING

4 nos 63 A TPN MCB

1 nos 40 A DP MCB

Other items such as

1 Set of control wiring

1 Set of designation plates

(a) All items complete as above

MR-13: Lift

Supply, Installation, Testing & Commissioning of lift for the following configuration with Full Simplex / Duplex Collective Control suitable for operation with or without attendent to serve following floors with rated speed of 1mtr per second and gearless machine with A.C. VVVF (Variable Voltage Variable Frequency) drive, machine room at top, operating on AC 415 volts, 3 phase, 50 cycles, with standard fittments, safety control and indicators, included electrically operated complete with power driven automatic SS hairline finish sliding door, car ceiling of SS hairline finish with CFL of frosted glass direct light and one fan. Flooring of white artificial granite stone. Landing entrance with SS hairline finish, automatic electric leveling device, automatic rescue device, a screen of infra red beam acting as a curtain across the door entrance with SS hairline finish, handrail as specified, including all steel works in machine room such as machine beam, bearing plate with beam and in pit necessary buffer support channel and ladder,complying with the following requirements:-

Special features to be accompanied with lift and lift system:-

1. Direction & Position Indicator In Car.

2. Emergency Alarm.

3. Facia Plate.

4. 2 Phase Fireman System.

5. Hands Free Press & Speak Intercom- 2 Station.

6. Full height infra red safety curtains.

7. Tabular Handrail on the rear side of the Car.

8. Signal Fixtures in Stainless Steel Finish.

9. Car door lock.

10. Adjustable Guide Shoes.

11. Emergency Light With Rechargeable Battery.

12. PA Speaker Provision.

13. Lift Announcement system.

14. Micro-movement LED based buttons.

15. Over speed governor.

16. Automatic Rescue device.

17. Mirror full width and partial height on the rear side.

DETAILS OF INSTALLATION OF LIFTS.

(a) 08 Persons Capacity (544 Kg), Travel 5 Floors (Ground to 4th Floor), running up to 14 meter, 5 stops, 5 levels and 5 openings. Lift Car Door opening-800 mm

(b) 08 Persons Capacity (544 Kg), Travel 8 Floors (Stilt to 7th Floor), running up to 22 meter, 8 stops, 8 levels and 8 openings. Lift Car Door opening-800 mm

(C ) 10 Persons Capacity (680 Kg), Travel 8 Floors (Stilt to 7th Floor), running up to 22 meter, 8 stops, 8 levels and 8 openings. Lift Car Door opening-800 mm.

Note :- (All openings are on same side)

MR-14: Supplying and fixing following rating 415 volts,C Type,four pole ,63 ampere MCB in the existing Metering Panel, complete with connections, testing and commissioning etc. as required.

CMM INFRAPROJECTS LTD

GARG BUILDERS

Arsh Constructions

SUNEHARI BAGH BUILDERS PVT. LTD.

FORTUNA FOUNDATION ENGINEERS & CONSULTANTS P LTD

CMM INFRAPROJECTS LTD

Shiva Constructions

Arsh Constructions

SUNEHARI BAGH BUILDERS PVT. LTD.

FORTUNA FOUNDATION ENGINEERS & CONSULTANTS P LTD