Levelling of footpath, repairing of kerbstones, SWD, RR walls and other miscellaneous works at various places in Eastern side of Anushaktinagar, Mumbai.

Amount

PART I : CIVIL WORKS

Description of Work / Item(s)

Amount

PART I : CIVIL WORKS

Earth work excavation over areas in all soil by mechanical means / manual means upto 1.50m deep to required profile, level, grade, camber, dressing the sides, back filling, compacting in layers not exceeding 150mm thick, ramming and preparing the bed for foundation including dewatering , shoring etc. if required, disposing the surplus excavated materials at identified place within colony etc. complete all as per specification and directed by the Engineer-In-Charge.

Providing and laying dry rubble stone hard core soling of 150mm consolidated thickness in sub base to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone chips, supplying & finishing/blinding the surfaces with approved blinding quality murrum/ stone dust including watering, consolidation etc. all complete as per specification drawings & as directed by EIC.

Cutting bituminous road surfaces & reinstating the same with serviceable material and PCC including disposal of unserviceable materials at identified places within Colony etc. complete all as directed by the Engineer-in-Charge. (P.C.C. shall be paid separately under relevant item)

Providing and fixing 60 mm thick (min.) factory made reflective (Glossy/ Smooth finish ) interlocking paver blocks of approved make & Bruce/ Colorado shape of (M/S.Sneh tile or other approved Equivalent), approved colour, shade, size, shape paver blocks manufactured with cement concrete grade not less than M-35. including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceable materials and disposing off the debris at the designated place within the colony, including taking permission from statutory authority etc. complete all as per specification and as directed by the Engineer in charge.

Providing and fixing 80 mm thick (min.) factory made reflective (Smooth finish) interlocking paver blocks of approved make (M/S.Sneh tile or other Equivalent),approved colour, shade, size, shape glossy paver blocks manufactured with cement concrete grade not less than M-40. including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceable materials and disposing off the debris at the designated place within the colony, including taking permission from statutory authority etc. complete all as per specification and as directed by the Engineer in charge.

Providing, laying and fixing precast interlocking reflective and textured grass paver blocks of following grade o approved equivalent of approved colour, shade, size, shape manufactured with cement concrete grade not less than M-35, over layer of 50 to 100 mm thick murrum as levelling/cushioning layer over well compacted sub-base , finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including preparing the surface by levelling, dressing, spreading additional murum brought from a lead of 500 mts ,rolling the subgrade with 8 to 10 ton roller, disposing off the surplus debris/soil if any at the designated place within the colony, etc. complete all as per specification and as directed by the Engineer in charge.

a) 80 mm thick grass paver block of M-35 Grade of approved design, pattern and colour

Providing and fixing Glossy finished coloured cement chequered tiles of 30 mm thick of size 300 x 300 mm laid over concrete/soling / footpath in 20 mm thick cement mortar 1:6 bedding and joined with cement slurry and grouting with pigment of matching shade including filling the joints etc. complete all as directed by the Engineer in charge.

a) For flooring

providing and fixing Shahabad stone of minimum 25 mm thick including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceable materials and disposing off the debris at the designated place within the colony, including taking permission from statutory authority etc. complete all as per specification and as directed by the Engineer in charge.

Labour charges for removing existing Kerb stones and raising the bottom level by PCC 1:3:6 and refixing the Kerb stones into line and level, jointing with cement mortar 1:3, curing & including painting etc complete all as directed by the Engineer in charge.

Providing and fixing Hydraulically pressed factory made kerb stones full bull nose /half battered from approved manufacturers like M/s Sneh Tiles or other approved equivalent , made up of cement concrete grade not less than M-30 and having size 500 X 325 X 125 mm , of approved including removing the existing kerb stone stacking at designated place by EIC, necessary form work, compaction, finishing, curing, fixing with CM 1:3, jointing and pointing in cement mortar 1:3 including earth work and 75 mm thick & 200 mm wide PCC 1:3:6 for foundation below kerb stone etc. complete all as per specification and as directed by the Engineer in charge

Labour charges for removing and relaying existing 60/80mm interlocking paver blocks/ Shabad tile including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceable materials and disposing off the debris at the designated place within the colony, including taking permission from statutory authority etc. complete all as per specification and as directed by the Engineer in charge.

Painting the Kerb stones of both existing and new ones in pattern with two coats of flat oil paint of approved colour and shade over one coat of approved primer including preparing the surface by brushing manually/washing with water jets wherever required and complete all as per specification and as directed by the Engineer in charge.

Providing & laying Design Mix Reinforced cement concrete of M-30 grade using graded stone aggregate of 20mm max. size including mechanical mixing, placing , vibration, consolidation, finishing, curing, providing & filling expansion joints wherever necessary etc. all Complete at all floors and heights / levels, in drains / nullah as specified including dewatering, if any ( excluding cost of form work, shuttering & steel reinforcement which shall be paid in the relevant item) as per drawings , specifications and as directed by Engineer-in-charge.

Extra charges for concreting with Ready Mix concrete.

Reinforcement for reinforced cement concrete conforming to IS at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. Note: Binding wire required for the work will have to be supplied by the contractor & the same will not be measured for payment.

a)With high yield strength deformed bars Fe 500 grade/ Fe550 D Grade

Providing and Laying of Plain cement concrete using graded stone aggregate of 20 mm max size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. complete all as directed by the EIC.-

Brickwork 230 mm thick using bricks as specified with cement mortar 1:4 in including curing, raking out joints above ground level simultaneous pointing below ground level etc. complete as per specification and as directed by the Engineer in charge.

Random rubble masonry using spotless black trap or approved locally available stone in cement mortar 1:6 including raking out joints, simultaneously flush pointing using through bond stones at every 900 mm in horizontal & vertical courses of each layer, curing etc. complete all as per specifications, directed by the Engineer-in-Charge.

a) Rubble stone supplied by contractor

a) Rubble stone supplied by department

Cement plastering 20 mm thick using in CM 1:3(Cement1 : 3 Crushed sand) using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per and applied over stone wall or brick walls or concrete surfaces at all floors and levels, including repaired surfaces as per manufacturer's specification, including scaffolding and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by EIC.

Providing and fixing structural steel M. S. Angle, M. S. Chanel, M. S. Flat etc for fencing/grating at all levels and location as per existing design and pattern including supplying, cutting, fabricating, welding , erecting and fixing in position, including necessary scaffolding including painting whole angle with two coat of Epoxy paint of approved shade and on coat of approved epoxy primer etc. complete all as per direction of Engineer-In-Charge.

Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in proportion of 1:2 laying to the levels, slope and as per the drawing and specification and as directed by the Engineer-In-Charge including testing of joints etc. complete.

150mm dia RCC Hume pipe class NP2

Painting Paver blocks with two coats of Indigo floor paint paint of approved colour, shade & make including preparing surfaces by cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge

b) On Paver surfaces with two finishing coats .

Providing and spreading manually red garden soil free from stones, pebbles etc.at site on grass paver blocks to fill the voids/ opening of grass paver blocks , watering to settle the red soils, sweeping/brooming to clean the paver block surfaces, as directed by the Engineer-in-Charge & as per specifications. (Quantity will be taken as per truck body measurement filled with red garden soil without deduction of any voids. )

Supplying, erecting & fixing in position 12 gauge G.I. concertina wire fencing to existing barbed wire fencing /masonry wall work which consist of procuring G.I. concertina of approved quality, brand and of diameter as indicated below, erecting and fixing the same to top /side of ‘Y’ shaped angle provided over coping of compound wall, fixing concertina over ground along inside of compound wall including welding / screwing concertina to M.S. ‘Y’ angle to compound wall including cost of materials, labour, scaffolding etc. complete all as directed by the Engineer-In-Charge.

a) 600mm dia G.I. concertina to side / top of ‘Y’ shaped barbed wire fencing.

Supplying and fixing in position, 2 ply, 12 gauge, 4 spikes at 100 mm c/c G.I. barbed wire to M.S. angles / RCC wooden posts including supplying and fixing necessary ‘J’ hooks, bolts, nuts, washers, staples as required etc. including scaffolding etc. complete all as per Engineer-In-charge direction.

Demolishing plain cement concrete works / stone masonry/ road cutting by chiselling at all levels including scaffolding, disposal of materials outside of colony etc, complete all as directed by the Engineer - in- charge.

Providing assistance to the departmental complaints of various nature viz including tools and manpower, loading, unloading etc complete all as directed by the Engineer-in- Charge.

Disposal of debris such as excess earth, boulders unuseful concrete lumps, debris generated from various other works, unwanted materials including wooden and metal scraps, broken sanitary fittings/ fixtures, rejected cables, wires, rejected house holds, broken glasses pipes etc. accumulated in the surroundings of the various buildings, road/ footpath sides of Anushaktinagar including collecting, loading manually and mechanically as per requirement, levelling and dressing the spots from where debris is lifted and disposing of above debris at within Anushaktinagar designated place by EIC, including collecting, loading manually and mechanically as per requirement, levelling and dressing the spots from where debris is lifted and disposing of above debris at within Anushaktinagar designated place by EIC transporting by mechanical/ manual means, including labour, etc. All Complete as directed by Engineer-in-Charge Note: 1) Voids @30% shall be deducted from fully loaded truck measurements. 2) Measurements will be taken as per Truck body. 3) Debris which cannot be loaded by JCB, has to be collected, lifted and loaded manually. 4) After removal of debris, the agency shall ensure proper levelling of surface.

Raised and cut pointing to stone work with cement mortar 1:4, including raking out joints, pointing neatly and finishing the joints as specified below including curing, scaffolding etc. complete all as directed by the Engineer-in-Charge.

Providing and applying one coat of base primer (Apex Ultima protect of M/s. Asian paints or Aquatech of M/s. ICI Dulux or equivalent) and two top coats of acrylic water proof exterior coating of Weather shield flexx rainproof system of M/s. ICI Dulux or other approved equivalent make and shade over the sand face / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.47 ltr/Sqm for 3 coats,(base coat @.29 Ltr/sqm & two top coats @0.18 Ltr/sqm ) for sand face surfaces including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. Complete generally as per the manufacturer's specification and as directed by the EIC.

a) Over sand faced plastered / Form finished surfaces/ RRM walls

Providing, supplying "JCB" Loader cum excavator and executing the works like excavation, grading, levelling, debris cleaning, cutting wild vegetations & branches etc. . JCB Excavator cum loader including Operator. CONDITIONS: 1) The above rate shall be inclusive of JCB, Fuel, Operator and other consumables etc. 2) The rates are inclusive of all Taxes including Service taxes/GST if any. 3) Break Down Hours and Lunch break timings shall not be considered for payment. 4) You are required to engage skilled driver/Operator possessing valid driving license and proper address proof & police verification certificate. 5) The make and model of the vehicle should be less than 8 years old, roadworthy with all valid documents. 6) The vehicle should be free from all sorts of defects and will be subjected to inspection by a representative of DCSEM whose decision is final and binding as regards suitability of that particular vehicle. 7) The cost of POL, maintenance of vehicle including replacement of parts, fuel etc. Wages of driver, Motor Vehicle taxes , comprehensive insurance , etc. shall be payable by you and DCSEM shall have no liability towards usage of the vehicle. 8) The contractor shall take the signature of the departmental authorities on Log Book/ Duty Register . 9) Fraction of hours shall be rounded off to nearest half an hour at the time of preparing running bills/ final bill. 10) Excavator bucket of 300 mm/600mm/900mm wide must be attached to the JCB whenever directed. 11) The contractor shall arrange adequate insurance coverage for his personnel. 12) The cost of damages to any government movable/ immovable property in and around the site shall been entirely borne by the contractor. Department shall not be responsible for any liability arising out of any accident/ injury caused to contractor persons while executing the job. 13)The driver shall work as per instructions given by the departmental officers.

RESHMA CONSTRUCTION (BID ID -3256901)

MARUTI ENTERPRISES (BID ID -3262072)

Meena Enterprises (BID ID -3261200)

RESHMA CONSTRUCTION (BID ID -3256901)

MARUTI ENTERPRISES (BID ID -3262072)

Meena Enterprises (BID ID -3261200)