Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrQualified 204 MALIK RESIDENCY TANWAR NAGAR DAMMER CO ROAD CAUSA MUMBRA THANE MAHARASHTRA 400612 THANE MAHARASHTRA 400612 | THANE | MAHARASHTRA | 400612 | ₹1.4 Cr | L1 | Qualified MSE, MII, Category: General |
| 2 | L2₹1.9 Cr+₹51.9 L (36.3%)Qualified | ₹1.9 Cr+₹51.9 L (36.3%) | L2 | Qualified MSE, MII, Category: General |
| 3 | L3₹2.0 Cr+₹52.2 L (36.5%)Qualified | ₹2.0 Cr+₹52.2 L (36.5%) | L3 | Qualified MSE, MII, Category: General |
| 4 | Qualified B 1023 NATIONAL HIGH WAY KANSIPORA BARAMULLA KANSIPORA KANISPORA BARAMULLA JAMMU KASHMIR 193103 UDYAM JK 03 0001401 01AAFFH7641P1Z6 R M | BARAMULLA | JAMMU AND KASHMIR | 193103 | - | - | Qualified MSE, MII, Category: General |
| 5 | Qualified | - | - | Qualified MSE, MII, Category: General |
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
8 Oct 2025, 10:00 amClosed
ISMB 150mm x 75mm x 5.80 mtr or beam conforming to relevant IS as per tech spec
ISMB 150mm x 75mm x 3.50 mtr long for beam conforming to relevant IS Make Tata or Sail of Jindal or as per make Appx att.
ISMC 75x40 3.5 m long welded with plate 250x250x6mm on one side with holes drilled as per tech spec
SRT 1630 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS as per tech spec
Steel Roofing Trough of size 1700 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS as per tech spec
SRT of size 1270 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet as per tech spec
PBS Roll of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs as per tech spec
HDPE Sheet 400 Micron as per tech spec
HDPE Sand Bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms
Load bearing concrete PCC Solid Blocks of size 400mm x 200mm x 200mm as per tech spec
Pre prefabricated Steel door confirming to IS 1038-1938 of size 900mm x1800mm as per tech spec
MS Hexagonal nuts. Bolts and washer 12 mm dia 40 mm long as per tech spec
Plywood 8 ft x 4 ft x 12mm thick as per tech spec
CGI Sheet 810 X 1830 mm long 0.63mm thick as per tech spec
Red Oxide primer conforming to relevant IS as per tech spec
Thinner Sample to be approved before supply
M Sand conforming ton relevant IS as per tech spec
Stone aggregates to be crushed rock or gravel 20mm graded confirming to relevant IS
Stone aggregates to be crushed rock or gravel 40mm graded confirming to relevant IS
Stone aggregates to be crushed rock or gravel 63mm graded confirming to relevant IS Bid Number : GEM/2025/B/6737267 Dated : 27-09-2025 Bid Document 1/22
8412300
GEM/2025/B/6737267
Two Packet Bid
Steel Roofing Trough of size 1700 x 613 x 180mm made out
30 days
Kupwara
Total value wise evaluation
BOQ
7 documents required · 7 mandatory
2 yrs
₹70 L
₹5 Cr
80%
₹2.8 L
27 Sept 2025
27 Sept 2025
8 Oct 2025
ISMB 150mm x 75mm x 5.80 mtr or beam conforming to relevant IS as per tech spec
ISMB 150mm x 75mm x 3.50 mtr long for beam conforming to relevant IS Make Tata or Sail of Jindal or as per make Appx att.
ISMC 75x40 3.5 m long welded with plate 250x250x6mm on one side with holes drilled as per tech spec
SRT 1630 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS as per tech spec
Steel Roofing Trough of size 1700 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS as per tech spec
SRT of size 1270 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet as per tech spec
PBS Roll of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs as per tech spec
HDPE Sheet 400 Micron as per tech spec
HDPE Sand Bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms
Load bearing concrete PCC Solid Blocks of size 400mm x 200mm x 200mm as per tech spec
Pre prefabricated Steel door confirming to IS 1038-1938 of size 900mm x1800mm as per tech spec
MS Hexagonal nuts. Bolts and washer 12 mm dia 40 mm long as per tech spec
Plywood 8 ft x 4 ft x 12mm thick as per tech spec
CGI Sheet 810 X 1830 mm long 0.63mm thick as per tech spec
Red Oxide primer conforming to relevant IS as per tech spec
Thinner Sample to be approved before supply
M Sand conforming ton relevant IS as per tech spec
Stone aggregates to be crushed rock or gravel 20mm graded confirming to relevant IS
Stone aggregates to be crushed rock or gravel 40mm graded confirming to relevant IS
Stone aggregates to be crushed rock or gravel 63mm graded confirming to relevant IS Bid Number : GEM/2025/B/6737267 Dated : 27-09-2025 Bid Document 1/22
SRT 1630 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete with set of a spanner OJDE of size 20-22 per 10 Nos of SRT. SRTs shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer
Steel Roofing Trough (SRT) of size 1700 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete with set of 14 Nos MS Hexagonal nuts. Bolts and bitumen & Steel washers 12 mm dia 40mm long and a spanner OJDE of size 20-22 per 10 Nos of SRT including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 25.00 Kgs
PBS Roll (Self finidhed tarfelt) hessian base (for water proofing) Grade -1 conforming torelevant IS of size 20m x 0.90m (weight of each roll shall not be less than 42.50 Kgs+2.5 Kgs in dry conditions). The finished mtrl shall be free from visible external defect such as holes
ragged or untrue edges
protuberances and indentations.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_8412300.pdf
GEM_BID
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
techspecc_2025-09-27-20-59-48_cd86c208e053a8e6df3cf2d5e1661bec.pdf
BOQ
strengthening_of_pd_2025-09-27-20-59-48_691313e0722692be817e9b9489a70e86.csv.pdf
BOQ
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .