Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-Finance | L1 | Accepted-Finance BSR | |
| 2 | L2₹1.0 L−₹9.0 L (89.8%)Rejected-Finance | L2 | Rejected-Finance High Rate |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
24 Sept 2026, 12:00 pmClosed
Gram Panchayat
Gram Panchayat
Public Single-Phase Tubewell (Solar- Powered), near the Primary Veterinary Hospital.
2026_PRD_599524_1
03/26-27/145/Sarla
Open Tender
Civil Works
Percentage
250 days
Sarla
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Sarpanch Gram Panchayat MDRISL
₹20,000
Yes
26 Sept 2026
21 Sept 2026
24 Sept 2026
21 Sept 2026
24 Sept 2026
21 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of tube well from ground level & up to 100 mtrdepth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800
(Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for
arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water.
Nominal bore 200 mm dia. | 142.5 | RM | 1,523 | ₹2,17,027.5 |
| 2 | Add 15% extra on above item (Item no 2.1.1 to
2.1.3) for drilling depth beyond 100 mtr and up
to 200 mtr, rate shall be applicable for only
extra depth beyond 100 mtr and up to 200 mtr. | 42.5 | RM | 228.45 | ₹9,709.13 |
| 3 | Providing and Lowering of ISI mark PVC-U
casing and screen pipe as per IS : 12818: 2010
or amended up to date having pipe thickness as
per IS code suitable for TW and DCB with
threading, winding with superior quality of
plastic mesh & rope in three layers with end
cap complete as per technical specification and
direction of Engineer In charge. Medium well
casing pipe (CM) suitable for depth above 80
mtr and up to 250 mtr. 150 mm nominal dia (
internal dia) | 142.5 | RM | 1,114 | ₹1,58,745 |
| 4 | Development of tube well as per IS: 11189- 1985 and IS: 2800 |(Part- I)- 1991 (both amended up to date) using suitable compressor to give sand free water for required yield of the gravel packed tube well. | 8 | Each | 1,456 | ₹11,648 |
| 5 | Supply& Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm
long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near
top plate nipple shall be provided with end plug150 mm di a | 1 | Each | 812 | ₹812 |
| 6 | Making slots of hole size and Nos. as directed
by EIC in PVC / AC pressure pipe Class 15 as per
technical specification for using slotted pipe in
TW casing | 7,162 | Each | 0.98 | ₹7,018.76 |
| 7 | Testing verticality of tube well by plumbing system and yield test and draw down test by pumping system as per IS: 2800 (Part – II) – 1979 or as amended up to date. | 1 | Each | 8,178 | ₹8,178 |
| 8 | Fabrication & Fixing M.S. Stand of specified
class of angle iron L-shaped of 50 mm size with
Tow legs grouted by 300*300*300 mm CC Block
M-15 in the ground and all legs tied up with
each other through same size of angle iron
along with cross bars to support complete in all
respect. | 89.48 | Kg | 117 | ₹10,469.16 |
| 9 | Supply & Fixing MS clamp set of 50x6 mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set. | 2 | Each | 696 | ₹1,392 |
| 10 | Cost of Single Phase solar Power pump Providing
installation and commissioning of Solar Energy
based single phase bore well water pumping system
with galvanized M.S. fibricated structure with 5000
liter storage tank on minimum 3m staging and
required accessories including real time online
management & monitering system and
|comprehensive operation and maintenance for a
period of 2 years in for producing minimum 1000
liter treated water per day against head range upto
200 meter | 1 | Each | 5,75,000 | ₹5,75,000 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
ubn_solar.pdf
Tender Documents • 9.29 MB
BOQ_1062629.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .