Loading
Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹5.3 L
Closing Date
22 Oct 2026, 3:00 pm
Electrical Executive Engineer, Electric work Division no 3
EEE
Electrical Executive Engineer, Electric work Division no 3 Patna ,BCD
ELECTRICAL Superintending Engineer, ELECTRIC BUILDING CIRCLE, PATNA
ESE
Corridor light, shifting and replacement of new Panel, VTPN in both side of 1st floor, north & south side of main building and Ground floor corridor in DGP side (South wing) of Old Sectt, Patna.
140651
52/EBD03/BCD/2026-27
Open Tender
ELECTRICAL
Patna
• (a) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given. 16.1
Bid Security Amount in Rupees Total Bid Security Amount in
Rs. 529270
IFB
• (i) Legal Status of Bidder 4.3(a)
(ii) Place of Registration.
(iii) write Principal place of Business
(iv) Power of attorney of signatory Bid
• Total value of Electrical work, in Rupees, Performed in last five years. minimum annual financial turnover (in all classes of Electrical works only) amount of construction work of at least the equal to the 50 % of estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year Rs. 13231553
4.5(A) (a)
2020-21
2021-22
2022-23
2023-24
2024-25
• As per SBD Clause-4.5 C to qualify for award of the contract each bidder having work experience in similar nature work of SITC of HVAC/VRF/VRV AC System. The work value should not less 50% of quoted value during last 5 years certified by the competent authority not below the rank of Executive Engineer of Central/State Govt. Departments/Public sector undertaking for a similar nature of work along with the technical bid. Rs. 13231553
• Minimum Quantities of work done as prime contractor in any one year during last five years.
• Electrical License The contractor or his identified sub-contractor should possess required valid electrical license for executing the building electrification works and should have executed similar electrical works for a minimum amount as indicated in Appendix in any one year 4.5A( d)
• (a) Amount of Existing commitments and ongoing works in Rupees Sec 2-1.4(A)
(b) Amount of Work for which Bid already submitted, in Rupees Sec 2-1.4(B)
• Numbers and Maximum age of Equipments with bidder
• Name of the Personnel and Experince in years and Select from drop down list
• Evidence of accesses to Financial Resources in Rupees Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (for work under this bid). 4.2(i)
• Proposed methodology and programme of construction Select from drop down list the proposed methodology and programme of construction, backed with equipment planning and deployment 4.3(l)
• Litigation History. Select from drop down list. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)
• Affidavit Select from drop down list. Regarding statements made in the required attachments are true and correct. Sec-2, Affidavit
• Undertaking Select from drop down list. Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. Sec-2, Undertaking
• Registration No.
IT.& ST Registration & clearance Certificate
Labour License
Character Certificate ( in case of company/private limited, the bidder must submit/upload Character certificate of all directors), (in case of partnership firm, character certificate of all partners must be uploaded/ submitted.
NOC for Debar (If required)
• REQUIRED ATTACHMENTS FROM BIDDERS
ELECTRICAL
PERCENTAGE
L1
1
23 documents required · 23 mandatory
₹10,000
Processing Fee: 5900
₹5.3 L
(1) O/O E.S.E,E.B.C,PATNA,BCD [10-10-2026,3:00 PM] (2) O/O C.E.E-01,BCD,PATNA,[12-10-2026,3:00 PM]
25 Sept 2026
25 Sept 2026
23 Oct 2026
25 Sept 2026
22 Oct 2026
25 Sept 2026
10 Oct 2026
BILL OF QUANTITY
Name of work :- Corridor light, shifting and replacement of new Panel, VTPN in both side of 1st floor, north & south side of main building and Ground floor corridor in DGP side (South wing) of old sectt, Patna.
Sl.No. Code Particular Qty. Rate Unit Amount
1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.
1' X 1' LED Light 181
2 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 10 Each 414.00 4,140.00
3 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 303 Meter 201.00 60,903.00
1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 142 Meter 925.00 131,350.00
1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire 110 Meter 1,312.00 144,320.00
4 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
2.8.5 6 way, Double door 4 Each 2,197.00 8,788.00
5 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2.12.1 6 A to 32 A, Single pole 16 Each 237.00 3,792.00
6 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 160 Metre 144.00 23,040.00
3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 8 Set 16,675.00 133,400.00
7 5.3 Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. (For Non-residential building) 20 Each 762.00 15,240.00
8 AR SITC of 25W Led Strip with electronic driver including connection with 1.5 sq.mm FR PVC insulated copper conductor cable etc as required. 350 P/Mtr. 300.00 105,000.00
9 N.S.I Supplying and drawing following sizes of non-Armoured insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.
10 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
7.4.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 2100 Metre 109.00 228,900.00
11 2.34 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 250 amp, four pole MCCB's as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs etc as required. (but without MCCB's & MCBs)
2.34.3 8 way, Double door, I/C 250A, MCCB 12 Each 22536 270432
2.34.4 12 way, Double door, I/C 250A, MCCB 26 Each 23736 617136
12 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'
13 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
14 5.8 Supplying and fixing Surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.
Incomer And Metering Section
15 M/R SUPPLY OF 3 PH. DOUBLE DOOR OUTDOOR WEATHER PROOF WITH GLASSS PROTECTION WITH GASKIT, FEEDER PILLAR MIN. DEPTH 350MM OPENABLE FROM THE FRONT FABRICATED FROM 40MM X 40MM X 6MM ANGLE IRON WHERE AS NECESSARY AND 2MM THICK CRCA SHEET SUITABLE FOR 415V 3PH. 50HZ, AC SUPPLY COMPLETE WITH 800A COPPER BUS BAR HINGED DOOR HAVING LOCKING ARRANGEMENT AND HAVING DETATCHABLE COVER AT THE BOTTOM OF THE FEEDER PILLAR AROUND FOR THE EASY WORKING WITH CABLE INCLUDING POWDER COATING INTERCONNECTION, TESTING, COMMISSIOING AND EARTHING ETC, AS REQUIRED. FEEDER PILLAR SHALL NE RESTED ON ANGLE IRON OF SUITABLE SIZE I/C MAKING OF BRICK/CEMENT CONCRETE FOUNDATION (1:3:6) CEMENT CONCRETE 20CM BELOW & 30CM ABOVE FROM THE GROUND LEVEL ETC. 800A FP 36KA MCCB WITH MP BASED REL. HAVING S/C & O/L PROTECTION 4 SET 3,565,281.00 14,261,124.00
ROTARY OPERATING HANDLE 800A
800A SPREADER LINK SET OF 8
AUX+TAC CONTACT FOR 800A MCCB
MX AC CVS800 1000 1250A
EMERGENCY STOP WITH NC ELEMENT
DIGITAL MULTIFUNCTION METER WITH RS485
CURRENT TRANSFORMER COIL 800/5A WITH CT SHORTING LINKS
6A SP 10KA C-CURVE CONTROL MCB
6A DP 10KA C-CURVE CONTROL MCB
ON-OFF-TRIP + R-Y-B PHASE INDICATION LED LAMPS 220V
BUS BAR SECTION
BUS BAR (50X10MM) 800A SOLID COPPER BUS BAR OF SUITABLE RATING WITH HEAT SHRINKABLE COLOR CODED AS PER IS 385
OUTGOING SECTION
O/G :- 1-12 (MCCB) SUPPLY OF 250A RATING FOUR POLE 415V MODULED CASE CIRCUIT BREAKER COMPLETE WITH CONNECTION AS REQUIRED CVS250F TM250D 4P3D
S.LINK 3P SPREADER PH. BARRIERS 250A SPREADER LINK SET OF 8
ROH CVS 100/160/250 EXTENDED ROH
A9KF71206 ACTI 9K MINIATURE CIRCUIT BREAKER 6A DP MCB 10KA C-CURVE
AUX+TAC AUX+TAC CONTACT FOR 250A MCCB
VISUAL LAMPS ON-OFF-TRIP BREAKER STATUS INDICATION LED LAMPS 220V
O/G :- 13-14 (MCB) 63A FP 10KA MCB C-CURVE
O/G :- 15-16 (MCB) 32A FP 10KA MCB C-CURVE
FSS PANEL ACCESSORIES
CONTROL WIRE. COPPER FRLS CONTROL WIRE
POWER WIRE. POWER WIRE FRLS COPPER OF RATING
METAL ENCLOSURE BOARD PANEL METAL ENCLOSURE (2300Wx2175Hx450D + 400MM STAND)mm
FSS FIRE CHEM DLP 2KG CLEAN AGENT FIRE SUPRESSION SYSTEM INCLUDING SUPPLY & INSTALLATION
SUPPLY OF 2KG CAPACITY DLP TYPE CLEAN AGENT/GASS FLOODING SYSTEM FOR AUTOMATIC FIRE SUPPRESSION IN ELECTRICAL ENCLOSURE BASED CLEAN AGENT/GAS AS PER TECHNICAL SPECIFICATIONS AND T&C etc COMPLETE AS REQUIRED AND WITH FOLLOWING TYPES OF SERVER CABINETS (CONSTRUCTION) - OPEN CABINET WITH NATURALAIRFLOW TYPE OF CLEAN AGENT WITH ZERO ODP (OZON DEPLETING POTENTIAL) AS PER NFPA 2001 TO BE USED FOR FIRE SUPPRESSION- FK 5-1-2 CLEAN AGENT LISTING - UL CONTAINER (CONTAINING THE CLEAN AGENT) - BS EN 3-8 ELECTRICAL MONCONDUCTIVE CLEAN AGENT TYPE- YES CLEAN AGENT CAPACITY OF CYLINDER IN KG-2 KILOGRAM LENGTH OF HEAT SENSING TUBE (HST) MADE OF SPECIAL MODIFIED POLYMIDE (PA) IN (METER) APPROVED BY LPCB/UL LISTED AS REQUIRED
INTERNAL DIAMETER OF HEAT SENSING TUBE - 4MM OUTSIDE DIAMETER OF HEAT SENSING TUBE - 6MM REPRESSURIZED TUBE-HEAT SENSING TUBING SHOULD BE PRESSURIZED WITH DRY NITROGEN GAS CONFIRMING TO IS 1747 AND CONNECTED TO AN EXTINGUISHING AGENT CONTAINER VIA A PRESSURE RELEASE VALVE. PRESSURE VALVE- DIRECT LOW-PRESSURE TYPE WITH INBUILD PRESSURE GAUGE, INTEGRATEDBALL VALVE OPEN/CLOSE WITHIN THE VALVE BODY. REED SWITCH TO MONITOR THE VALVE POSITION USING THE REED SWITCH RELAY TO INDICATE VALVE OPEN/CLOSED POSITION - WITH POWER BACKUP FOR MONITORING PANEL
END OF LINE ADAPTER WITH PRESSURE GAUGE
PRESSURE SWITCH UL LISTED
SCU- SYSTEM CONTROL UNIT (Li-ION BACKUP)
TESTING & FORWARDING TESTING AND PACKAGING
Total Amount 27,003,169.00
Less Dismantled Charge @2% 540,063.38
Elect.Executive Engineer,
Elect. Building Div.No.3,
B.C.Deptt.,Patna.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 52.pdf
NIT • 3.30 MB
63469_CHECK LIST AND OTHER DOCUMENTS.pdf
NIT • 14.19 MB
NEWSPAPER PUBLICATION 52.pdf
NIT • 1.48 MB
Home Deptt DGP SIDE -BOQ.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .