REPAIR/ REPLACEMENT OF ROOF SHEET, ROOF TREATMENT, JOINERY, DRAINAGE, PLUMBING AND CERTAIN OTHER MISC REPAIR WORKS IN MD AND OTM ACCN AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed

M&L for rendering/ screed bedding 15mm thick in cement mortar 1:4 on concrete surfaces of roof finished even and smooth without using extra cement mixed with water proofing compound of approved make as per manufacturers instructions on existing roof surfaces complete all as specified and directed.

M&L for roof treatment, cleaning of old roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:- (a) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) Applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required and directed. (d) Applying two coats of aluminium paint @ 0.20Kg/Sqm.

Supply only Integral water proofing compound complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi-corrugated , etc) sheets in roof coverings complete all as specified and directed.

Fixing only galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with 'L' or 'J' type hooks and washers in roofs, complete all as specified and directed. Note: Sheets as retrived from Srl Item No 07.00 above are to be used.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

Dismantling timber scantlings in framed/ unframed 40 sq. cm and over in section, in any position, complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'B', complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates incl welding etc of grade Fe-410 (Gde E-250) quality-B, complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work complete all as specified and directed.

M&L for preparation of new steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 4mm thick 600x600mm non asbestos fibre cement building boards white/ off white (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing of rubbish outside premices, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

All as per Srl Item No 27.00 here in before but (EXCEPT BRICKS), complete all as specified and directed. Note: Bricks obtained from Srl Item No. 24.00 here in before shall be reused.

M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in surface channels and drains etc complete including necessary formwork and smooth fairfinish complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in coping, and embeding/ fixing of fencing posts, as directed including necessary form work complete all as specified and directed.

Taking down of cement plaster incl raking out of joints hacking for key scrubbing down with water complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surface finished even and smooth, without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick surface/ concrete surfaces finished even and smooth with using water proofing compound of approved make as per manufacturers instructions on existing roof surfaces complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer with alkali resistant priming paint on walls, complete all as specified and directed.

M&L for preparation of old treated surfaces of wall and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed

M & L for applying two coats of cement base paint incl preparation of old plastered surfaces of wall, complete all as specified and directed.

M&L for preparing of old plastered surfaces of walls over head tank of external dia 8.40 mtr, height exc. 6 mtr and n. exc. 25 mtr and applying two coats of cement base complete, incl making suitable arrangement for working like scaffolding and safety precautions, complete all as specified and directed.

M&L for preparing of old plastered surfaces of walls of external dia 8.40 mtr over head tank of height exc. 6 mtr and n. exc. 25 mtr and applying two coats of white wash complete, incl making suitable arrangement for working like scaffolding and safety precautions, complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall applying two coats of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint, complete all as specified and direceted. Note: Shade will be approved by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over and including chalk whiting priming coat complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site o complete all as specified and directed.

S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 15 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.

S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 20 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.

S & F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S & F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR), Junction, (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), Junction (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bends with access door complete all as specified and directed.

Dismantling water tanks exc. 250 ltrs & n. exc. 500 ltrs capacity and removing from site complete all as specified and directed

Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed

S&F rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

Refixing of rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.

Refixing of rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.

S&F in repair ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed 20mm bore complete all as specified and directed

S&F in repair 20mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F in repair 15mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.

S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.

S & F in repair 15mm bore bib tap fancy type chromoim plated long body cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane. incl Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, commplete all as specified and directed.

S& F in repair stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.

S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover white/ coloured closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap, complete all as specfied and directed.

S&F in repair PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F health faucet (ABS body) with 1.25 mtr long metalic expandable tube & hook complete all as specified and directed.

S&F toilet paper holder,chromium plated with flat recessed type stainless steel, fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S&F in repair chromium plated brass CP mixer valve for mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises all as specified and directed .

M&L for Glazed ceramic colored tiles on vertical surface such as in skirting/dado of size 350x250x7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles.over Including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick square/ rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed with CM 1:6, complete all as specified and directed.

M&L for 300 x 300 or 400x400, 9 to 10 mm thick, coloured, Endura heavy duty tiles, pre cast factory made, laid in floors or fixed to wall, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, laid over and incl 20 mm thick screed bed in CM (1:6), surface finished even and rough to receive the tiles complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick square/rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay with glazing bars, complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay without glazing bars, complete all as specified and directed.

S&F steel window or ventilators, fixed type, with galzing bar complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC concealed Conduit with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 87.00 here-in-before but for one 3/5 pin socket 5 Amp on same board complete all as specified and directed

All as per item No 87.00 here-in-before but for one 3/5 pin socket 5 Amp on independent board, complete all as specified and directed

All as per item No 87.00 here-in-before but for 3 pins socket outlet 15A independent with 2.5 sq mm wire and 2.5 sqmm earth wire complete all as specified and directed.

S&F switch piano flush type, 5 Amps, single pole one way complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5A (multi purpose) complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5/15A (multi purpose) complete all as specified and directed

S&F switch piano flush type, 15 Amps, single pole one way complete all as specified and directed

M&L for Fan regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals complete all as specified and directed

S&F batten holder PVC body, with back plate incl with LED Lamp 9 watt, complete all as specified and directed

S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.

S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.

S&F MCB SP 6-32 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F MCB TPN 63 Amps, 415V, 10KA, incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F in replacement of electric ding dong door bell, 240 Volt, single pole, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on complete all as specified and directed.

S&F LED Bulk head luminaire 10W Decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings, complete all as specified and directed.

S&F LED mirror light 10 watt with diffuser, 2 feet, 220V, AC decorative type with driver duly electrical connection from ceiling rose to fittings, complete all as specified and directed.

S & F LED tube light along with fixture, 20W (4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings complete all as specified and directed.

S&F in repair LED Post top 40 watt decorative type,made of cast aluminium with decoratice opal polycarbonate diffusar with IP-65 protection including fixing with suitable size GI pipe as required on the top of gate pillar including all fixing accessories with MCB DB 2 way with Suitable MCBs and control wiring from DB to fittings complete all as specified and directed.

S&F LED luminaire 35/36 watt, 600 mm x 600 mm, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

m/s jupiter builders

S.R.SHARMA & SONS