Construction of (02 No.) 200 mm Dia Production Wells by ODEX Method at AIIMS Awantipora Pulwama.

Amount

Cost on account of hiring charges of Hydro geologist/Geologist by firm for ground water feasibilty survey and furnishing of geologist report to the department job also includes resistivity test by latest equipment for identified site and subsequently furnishing of report to the department before construction of well is taken in hand by the firm. (1 job each)

Boring/drilling bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS 2800 (part I), by fixing case drive shoe including collecting samples from different strata preparing and submitting strata chart/bore log including hire and running charges of all equipement tool, plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level .All kinds of starta (Daimtere of casing/strainer pipe of 200mm. (90 mtr each)

Boring/drilling bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS 2800 (part I), by fixing case drive shoe including collecting samples from different strata preparing and submitting strata chart/bore log including hire and running charges of all equipement tool, plants and machineries required for the job, all complete as per direction of Engineer-in-charge beyond 90 m depth and upto 200 mtr depth below ground level .All kinds of starta (Daimtere of casing/strainer pipe of 200mm. (110 mtr each)

Supplying and assembling in bore well ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of aaproved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in charge 200mm nominal dia having wall thickness 7.1mm or (as per IS code: 4270) (200mtr each)

Development of tube well in accordance with IS: 2800 (Part-1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, ruing the compressor for required time till well is fully devcloped measuring yield of well by "V" notch method or any other approved method measuring static level and draw down etc. by step draw down method collecting water sample & getting tested in approved laboratory, I/C disinfection of tube well all complete including required hire and labour charges of air compressor, tool: and accessories etc. all as per direction of Engineer In-charge. (1 Job each)