REPAIR/REPLACMENT OF INTERNAL WIRING, FITTINGS, FIXTURES, LIGHT FITTINGS, UNSV ELECTRIC CABLES/POLES/SECURITY LIGHTS, EARTHING, DBS, MCBS SUB MAIN WIRING AND AC POINTS/SOCKETS IN CDA COMPLEX AND LAO COMPLEX UNDER GE GUWAHATI

Amount

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (nominal area) FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of size not less than 20 mm dia concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor green colour to common earth and connected to earth dolly for fan/light/ exhaust fan controlled by one switch all complete including cutting chases/in walls/ceiling as required and making good the distrubed surfaces in cement mortar(1:3) as specified and directed. Note:- (i) Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate.

All as per item 2.0 above but for one bell point control by one 5/6 Amp piano type bell push complete all as specified and directed.

All as per item 2.0 above but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and directed.

All as per item 2.0 above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed.

All as per item 2.0 above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

All as per item 2.0 above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade drawn in and including PVC casing and capping of size 25-32 mm fixed to wall ceiling including PVC closed recessed boxes ISI marked with 3.00 mm thick plastic laminated sheet top cover for mounting of switches, sockets etc incl 1.50 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade single core earth continuity conductor connected green colour to common earth dolly all as directed and specified for the followings.

One light /fan point controlled by one 5/6 Amp piano type switch all as specified and directed.

All as per item 3.0 above but for one bell point controll by one 5/6Amp piano type bell push complete all as specified and directed.

All as per item 3.0 above but for One 3 pin socket outlet 5 Amps on same board all as specified and directed..

All as per item 3.0 above but for One 3 pin socket outlet 5 Amps on indpendent board all as specified and directed.

All as per item No.3.0 above but with 2.5 sqmm single core multistranded copper conductor FRLSH cable for 3/5 pin 15 Amp socket outlet on independent board all as specified and directed.

All as per item No.3 above but with 2.50 sqmm single core multistranded copper conductor cable for 2x1number 3/5 pin 5/6 Amp socket outlet on independent board. (Note : switch socket will be measured and paid seperately).

All as per item 3.0 above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

Material and labour for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

Material and labour for switch socket combination 2 in one, 5/6 pin , 5/6 Amps, 240 Volts flush type,complete all as specified and directed.

Material and labour for switch socket combination 2 in One , 5/6 pin,16 Amps flush type complete all as specified and directed.

Supply & Fixing socket out let, 5 pin 5 Amps flush type complete all as specified and directed.

Supply & Fixing switch flush type, 5 Amps, SP, two way complete all as specified and directed.

Supply & Fixing switch bell push flush type 5 Amps complete all as specified and directed.

Supply & Fixing call bell, buzzer type, AC 230 Volts single pole complete all as specified and directed.

Supply & Fixing ceiling rose polycarbonate type three terminals complete all as specified and directed.

Supply & Fixing step type electronic fan regulator 120 watt single pole 240 Volts complete all as specified

Supply & Fixing in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendent fitting complete all as specified and directed

Material and labour for providing Point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLSH unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic PVC casing capping medium grade of size not less than 20 mm wide double lock type and 1.2mm thick with the help of rawal plugs & screws including necessary fittingSupply & Fixingixtures to be fixed on wall/modular furniture/surface including modular surface box of adequate size with suitable modular plate cover for mounting modular switches, modular sockets, modualr regulators etc. complete with all fittings and accessories fixed to wall/ ceiling/surface for one light/ fan point controlled by one, one way modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLSH unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly complete all as specified & directed.

All as per item 14.0 above but for One light/fan/bell point point controlled by one way modular switch all as specified and directed.

All as per item 14.0 above but for One 5/6 Amp socket point controlled by one way modular switch on same board all as specified and directed.

All as per item 14.0 above but for One plug point 5/6 Amps on independent board with 2.5 sq mm copper cable complete all as specified and directed.

All as per item 14.0 above but for 3 pin 16 Amps switch socket combination on independent board with 4.0 sq mm copper cable complete all as specified and directed.

Supply & Fixing Modular switch one way 5/6 Amp ,1 module,240 Volts all as specified and directed.

Supply & Fixing Modular socket 2/3 pin, 6 Amps,2 module 240 Volts all as specified and directed.

Supply & Fixing Modular switch one way, 16 Amp,1 module, 240 Volts all as specified and directed.

Supply & Fixing Modular socket 16A, 6 pin, 3 module 240 volts all as specified and directed.

Supply and fixing fan step regulator,120W,2 Module A/C 240 Volts all as specified and directed.

Supply and fixing modular 25 A motor starter for AC/Geyser with inbuilt overload protection suitable for 4 Module complete all as specified and directed.

Supply & Fixing in replacement LED BALL LAMP of 10W BEE 5 star with Lumen output 950 lm and Colour Temp 6500K B22 type fitted suitable for PVC /Poly Carbonate type complete all as specfied and directed.

Supply & Fixing in replacement LED batten luminaires, 20 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from connector and ceiling rose, complete all as specified and directed.

Supply & Fixing in replacement mirror light batten type 5/9/10W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed.

Supply and fixing LED luminaire 300 mm x 300 mm, 24 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply & Fixing in replacement LED tube rod 20 W with high efficacy, lumen output not lessthan 105 lm/W (4 feet), made of crystal glass, high lumen output, and operated in single phase, 230 volts, 50HZ, suited for installation in existing tubelight luminaire with G13 lamp holders complete all as specified and directed.

Supply & Fixing in replacement LED batten with microwave motion technology luminaires, 20 watt, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from connector and ceiling rose, complete all as specified and directed.

Supply and fixing LED panel light ultra slim suspended linear size panel 1 Ft x 4 Ft made of alluminium extrusion housing for up & down light application with uniform effect 33 watt, NW, 220 V AC with high efficiency complete with driver suitable for roof hanging/ceiling incudling connecting up with three core flexible copper conductor complete all as specified and directed.

Taking down ceiling fan any type/ size from hook and dismantling cable and blades and bring in to contractor store for repair and hanging ceiling fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (Note :Rewinding of fan, painting and spare parts required shall be measured and paid separately)

Taking down exhaust fan any type/ size from wall and dismantling sealing cable and dismantling blades and bring in to contractor store for repair and fixing exhaust fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (note : Rewinding of fan, painting and spare parts required shall be measured and paid separately)

Material and labour for rewinding of ceiling fan 1200/1400 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying etc complete and refixing the same after rewinding and testing complete all as specified and directed.

Material and labour for rewinding of exhaust fan 280 to 450 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying etc complete and refixing the same after rewinding and testing complete all as specified and directed.

Supply and Fixing rubber bush for ceiling fan / Exhaust fan as existing size complete all as specified and directed.

Supply and Fixing bearing suitable for ceiling fan 1200mm to 1400mm /exhaust fan of bearing No- 6201/6202 complete all as specified and directed.

Supply & Fixing capacitor 2.5 MFD for ceiling fan. complete all as specified and directed.

Supply & Fixing capacitor 3.15 MFD for ceiling fan complete all as specified and directed.

Supply & Fixing rubber real with bolts, nuts and clamps of suitable for ceiling fan complete all as specified and directed.

Supply & Fixing PVC insulated flexible copper cable 3 core of size 23/0.0076 complete all as specified and directed.

Material and labour for painting of ceiling fans with blade complete insitu with synthetic enamelled paint by spraying includingfilling cavities with filler, one coat after cleaning all dust etc all as specified and directed.

Taking down burnt/unserviceable sub main wiring any size complete and making good disturbed surfaces of walls all as specified and directed.

Material and labour for submain wiring with two runs of PVC insulated multistranded,FRLSH copper coductor of size 6 Sqmm cable single core 1100 Volts Grade and one run of earth continuity conductor cable green colour of 6 Sq mm strand cable drawn in existing PVC surface casing capping of suitable size complete all as specified and as directed.

Supply and draw submain wiring with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduit including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and directed. Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

Taking down main switches and DBs of any type and make including wooden board/ junction box all as specified and directed.

Supply and fixing in replacement sheet metal enclosure double door for MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed.

All as per item no 71 above but SPN 12 ways 240 volts complete all as specified and directed.

Supply & Fixing sheet metal enclosure for multi phase out going suitable for mounting 63 Amps FP MCCBs. Vertical distribution board 4 ways mounting as incommer with 200 Amp rared bus bar, IP- 42 Protection ,double door conceled/ wall mounting suitable for mounting MCBs/Isolators complete all as specified and as directed.

Material and labour for Isolator single pole 5 to 40 Amps, C series 240 volts complete all as specified and directed.

Material and labour for MCB SPN 40 Amps, C series 240 volts complete all as specified and directed.

Material and labour for MCB SPN 63 Amps, C series 240 volts complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I complete alll as specified and directed.

Supply in replacement of PVC casing & capping with fittings, ISI marked, 20 mm size complete all as specified and directed.

Supply in replacement of PVC casing & capping with fittings, ISI marked, 25 mm size complete all as specified and directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 4 X 4 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 4 X 7 (Inches) complete all as specified and as directed.

Supply and fixing LED two light frosted glass with chrome finish wall lamp for fixing on wall with green and red colour LED bulb complete all as specified and directed.

Supply in replacement plug top, AC 230 Volts, 6 Amps complete all as specified and directed.

Supply in replacement plug top, AC 230 Volts, 16 Amps complete all as specified and directed.

D.B ENTERPRISE

M.G. ENTERPRISE

SWASTIKA TELESERVICES