Estimation of Sprinkler System, Smoke Detector System, Pump House and Pump House Accessories, Fire Extinguishers Etc. including R.C.C. over ground water tank 50K liter capacity.

Amount

MS Pipe 100 mm, ISI Marked, Make: Nezone

MS Pipe 80 mm, ISI Marked, Make: Nezone

MS Pipe 25 mm, ISI Marked, Make: Nezone

MS Flange 100 mm, ISI Marked

MS Flange 80 mm, ISI Marked

MS Socket 1", ISI Marked

MS Band 1", ISI Marked

MS Band 3", ISI Marked

MS Band 4", ISI Marked

Nut Bolts, ISI Marked

Butterfly 3", ISI Marked, Make: Zoloto

Butterfly 4", ISI Marked, Make: Zoloto

Welding Rod, Make: Star Gold

Red Paint, Make: Asian Paints

Red Oxide, Make: Asian Paints

Reducing Socket 100x80 mm, ISI Marked

Reducing Socket 80x25 mm, ISI Marked

Structural Support, ISI Marked

Anchor Bolt, ISI Marked

Presure Gauge, ISI Marked, Make: Impel/Airtech

Presure Switch ISI Marked, Make: Impel/Airtech

Sprinkler, ISI Marked, Make: Tyco

Flexi Drop 1000 mm, ISI Marked, Make: A-Hunt, UL Listed

Roset Plate, ISI Marked

MS Bend with Socket 1", ISI Marked

Tie Rod 8 mm, ISI Marked

Tie Rod 10 mm, ISI Marked

Bullet Fastner 8 mm, ISI Marked

Bullet Fastner 10 mm, ISI Marked

Universal Clamp 1", ISI Marked

Universal Clamp 3", ISI Marked

Universal Clamp 4", ISI Marked

Taflon Tape, ISI Marked

ABC Type Fire Extinguisher 4 Kg Capacity, ISI Marked Make : Atasee/A-Hunt

CO2 Type Fire Extinguisher 4.5 Kg Capacity, ISI Marked. Make: Atasee/A-Hunt

M. Foam Type Fire Extinguisher 9 Ltr. Capacity, ISI Marked. Make: Atasee/A-Hunt

4 Loop Pannel, Make : Morley

Addressable Detector, Make : Morley

Addressable Hooter & Switch, Make : Morley

Armoured Cable 1.5 mm

Y Clip 1"

System Commisioning Charge

MS Flange 6", ISI Marked

MS Pipe 6", Make: Nezone

Vibration Plate, , ISI Marked

NRV 6", Make: Zoloto

Y Strainer 200mm, Make: Zoloto

Switch Valve, Make: Zoloto

Butterfly 6", Make: Zoloto

Presure Gauge, Make: Impel/Airtech

Presure Switch, Make: Impel/Airtech

Ball Valve 15mm, Make: Zoloto

Ball Valve 1", Make: Zoloto

Socket 1", ISI Marked

Foot Valve, Make: Zoloto

Nut Bolt, ISI Marked

R. Socket 6"x4", ISI Marked

4 Core Cable, Make: Havels

4-6 SQ MM RING SOCKET, Make: Havels

6 mm Copper Pin Socket, Make: Havels

16mm Copper Ring Socket, Make: Havels

16 mm Copper Pin Socket, Make: Havels

6mm 3 Core Copper Cable, Make: Havels

Armoured Cable 3 Core 16mm, Make: Havels

Cable Tray, ISI Marked

Panel Stand

MS Band 6", ISI Marked

MS Nipple 1/2", ISI Marked

Bushing 1/2", ISI Marked

Pump House Comissioning & Installation Charge

Electric Motor Driven Main Pump, Make: Lubi

Jockey Pump, Make Lubi

Diesel Engine Driven Fire Pump along with 12V Battery, Battery Charger, Fuel Tank, Connection Pipe, Lug etc, Make: Lubi

Combined Control Panel, Make: Lubi

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.: All kinds of soil.

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-5OOD or more.

Centering and shuttering including strutting, propping, etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping, etc. and removal of form for: Columns, Pillars, Piers, Abutments, rosts and Struts

Centering and shuttering including strutting, propping, etc. and removal of form for: Retaining walls, return walls,Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping, etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

12 mm cement plaster of mix: 13.1.1 :-1 :4 (1 cement: 4 fine sand)

Cement plaster ( 1: 3) finished with a floating coat of neat cement. 20 mm Cement Plaster

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 9.105.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

REZWAN ANSARI (BID ID -269380)