Interior fit out work at the office space of CERC at 6th, 7th and 8th floors of Tower B, World Trade Centre, Nauroji Nagar, New Delhi-110029.

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 300.00 Cum 6326.05 1897815.00

Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern in linear portion of the

building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to

match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 575.00 Sqm 6095.50 3504912.50

ENGINEERED WOODEN FLOORING Panel 1820x145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6

m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC controlled sources Spruce

Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic use Conditions in

each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request "Wood for Life" Edge Protect + Provides a warranty on build-up of

residue dirt along the edges due to maintenance over the years 10 years "Wood for Life" Surface & Edge Protect + (lacquered products only)

1.03 M.R. Provides a warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges due to maintenance over the years 10 900.00 Sqm 6470.00 5823000.00

years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers

Natural variance Due to nature, visual surface can deviate from samples Surface treatments cf catalogue/website Nature Marquant Vibrant General

aspect of installed EN 13489 Lipping - difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width

% ≤ 0,2 Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes 30 - 85 % RH Cupping short side min % ≥ - 0,20 Open joints

short side (mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special installation instructions.or its equivalent

Providing & fixing of PANELS in patented round hole profile of size 146mm x 25mm x 3000mm(Min). IFS Terra DECKING are hybrid composites

with a wood plastic composite core made of 65% wood fiber, 30% High Density Polyethylene and 5% Additives and 360 degree capping of high

1.04 MR performance polymer compound for high UV resistance and vibrant aesthetics produced using co extrusion process.The Cladding panels should 164.00 Sqm 4976.00 816064.00

adhere to accelerated weather testing as per ASTM G154:2016,Cycle-1, Density of 1.3g/cum & tensile strength >22Mpa . The panel should be

compatible with no visible screw installation system using Novel Terra Powder coated Steel Clips.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize

design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at

the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying, installation, testing and commissioning of rubberised flooring, 20mm thick with box preparation, adhesive, installation, suitable for

gymnasium flooring complete in all respects

Providing and fixing removable raised/false access flooring with systemand its components of approved make for different plenum height with

1.07 11.54 possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand G.I.

Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer

diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment

upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through

base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for

securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the

pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the

system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as

per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade

(FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The

top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds

along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled

with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with

Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The

panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on

four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as

per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the

panel to ensure the quality of the product.

11.54.2 450 mm Finished Floor Height (FFH). 78.00 Sqm 5407.15 421757.70

Digitally signed by AMIT

SINGH 21:17:13 IST

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal

screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

Providing and fixing HDF wooden laminated flooring 12mm thick of AC-5 HDF grade with 0.20mm thick Polyurethane Sheet and 2mm thick PU

foam as per approved colour, shade and design complete as per direction of Engineer-in-Charge.

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

11.41A sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

TOTAL FLOORING WORKS 5857310.20 10917657.70

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other

end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the

cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 3950.00 Sqm 1145.95 4526502.50

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 50mmx100mm (50 mm width & 100 mm Height) U Shape panels in

RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high

corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x

2.02 MR 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers 76.00 Sqm 4245.00 322620.00

are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200

mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to

suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder Coated .The top coat of

panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to 6Mtr OR required length. Accessories

2.03 MR Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cut out to hold on panel in a module of 75mm 71.00 Sqm 4663.00 331073.00

closed. The joint of two carriers shall be joined by means of carrier splices maintaining a module of 75mm .4mm dia galvanized rod with special

height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I.shall be matching with the panel.

CUSTOMISED PERFORATED MESH FASLE CEILING: Supply & Install: Loop Type 2 system formed as an open metal ceiling with an open area of

more than 50% and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight

into the plenum. Bypassing the perforation, the S-shaped sides of the LOOP interlock both the long and front side joint with a non magnetic

suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y direction. The non-magnetic

suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size 966x1115x1.0mm GMS is perforated with 60mm

deep drawn holes .The substructure consists of a form perforated L profile [U1040] as a lateral grid which is suspended from the ceiling with nonius

adjustable upper and lower parts or with threaded rods using official approved dowel plugs. The grid profiles are to be connected together at the

ends by means of longitudinal connectors [U 1041] [screw fasteners]. The spacing of the grid profile is according to the requirements of DIN EN

13964. On profiles angles, C-band raster as secondary profiles are bolted on by means of C channel hanger bracket with M6 bolts. Only

construction parts approved by the manufacturer may be used. Provide necessary supports, provisions as per the architects Instructions.

Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2008 approved by TUV.Finish of ceiling is in RAL 9016 white/ RAL

9006 Silver grey powder coated with minimum 60 microns paint thickness.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and fixing Acoustic False Ceiling with 0.9 NRC: Sierra Mineral Fibre Acoustical Suspended Ceiling System with 15mm thick Sierra OP

Tegular 15/90 Edge Tiles with Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of

95%, NRC 0.90 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard,

CAC of 25db as per ASTM E1414, Light Reflectance ≥86% as per ASTM E-1477, Thermal Conductivity λ = 0.040 W/mK, Colour Global White, Fire

Performance of class A2-s1, d0 according to EN 13501-1 with 15mm Tegular 15/90˚ edge and 8mm drop in module size of 600 x 600mm. The

scrim on the face of the tile shall be cleanable and classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green Building application,

with Recycled content of 43% and VOC Emissions (French) class of A+. The tile shall have Environmental Product Declaration as per ISO 14025

and EN 15804+A2. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product.

SUSPENSION: The tile shall be laid on Suprafine 38 with 15 mm wide T - section flanges colour global white (matching to tile color) having roll

formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all

sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as

per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre

2.05 MR hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All 369.00 sq m 3540.00 1306260.00

main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of

hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border

cross tee/main beam shall be levelled using perimeter fill. To comprise main runner spaced at 1200mm securely fixed to the structural soffit using

suspension system (specifications above) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be

greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting

1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm

require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross

tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall

be carried out as per recommended procedure. SUSPENSION SYSTEM accessories supplied by consisting of M6 Anchor Fasteners with hanger

hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of

110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline

wire to be used for level adjustment during installation purpose in main runners).

Providing and Fixing SoundScpaes Acoustical blades which are 40 mm thick, flat glass fibre panels with Humidity Resistance RH 90%, with factory

fitted embedded metal insert with ¼” – 20 threading for fixing cable adjuster for hanging application. Acoustical blades shall have sizes of

200x1200mm, 200x1600mm ,400x1200mm, 400x1600mm, 400x1800mm with both side laminated scrim finished with uniform water based paint on

all surface (including edges). Acoustical performance of 0.65 NRC(for 400mm high x 40mm thick baffles with 400mm on centre distance and overall

depth of construction 1000mm) as per ASTM C-423 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000

Hz) in standard White color with Light reflectance 87% or in the color specified by the Architect (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef /

Lagoon), Fire Performance Class B2 – s1, d0 as per EN 13501-1 .The blade shall be made of Glass fibre panel with density of 110-120 Kg/ m3.

SUSPENSION: The Soundscapes Baffle shall be installed at a Centre to centre distance of 200mm The panel shall be hung using hanging kit

comprising of griper structure anchor & cap of dia 20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft cable of 1/16”

2.06 MR dia. Components 1) Griper structure anchor 2) Gripper anchor cap 3) Cable adjuster 4) Aircraft Cable Cable adjuster Spring loaded bottom end 128.00 sq m 12016.00 1538048.00

cable adjuster of dia. 9mm and 45mm long Aircraft cable Material Galvanized Steel Aircraft cable dimension 1/16” Ø x 2.4m Tolerance ±1mm.

INSTALLATION: Hanger Wire Attachment to Structure: Attach the gripper structure anchor to the structure with an appropriate fastener (1/4"-20

Threading) that will carry the full weight of the blades. Insert the end of the cable into the gripper anchor cap. Screw the gripper anchor cap

completely into the gripper structure anchor. Insert Suspension Cables: The panel is to be suspended using the aircraft cables which are suspended

from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster. The height & level of the panels

can be adjusted using the bottom end cable adjusters.Suspension of Blade: Locate the two factory fitted female inserts on the blades. Suspend the

Blades by screwing the bottom end of the cable adjuster into the female inserts. Installation should be carried out as per Manufacturer

recommended procedure.

Providing & fixing of planks - 600mmx1200mmx25mm thickness made out of wood wool fibre of width 1 mm thickness mixed with white portland

cementwith 5mm CNC groove as per architects design. TOTAL CONSTUCTION height of 200mm minimum from the true slab. Panels to be fixed

on framework made out GI (0.60mm thick & 60 MM Width) sections to form a section of 600mmx600mm. Celenit panels to be fixed on the Slabs

using UNIVERSAL BRACKET with a minimum of 50mm to 100mm void or gap with Galvanized screws of length 50 mm & Dia 4.5 mm. Mineral

2.07 MR Wool of density 50 kgm3 density (30mm thick) to be back filled.Thermal and acoustic insulation board, consisting of mineralized extra-thin fir wood 133.00 sq m 4677.00 622041.00

wool bound with white Portland cement. Wood wool is 1 mm wide. High quality boards for design acoustic absorption systems.It complies with EN

13168 and EN 13964.The boards are certified by ANAB-ICEA and natureplus for eco-compatibility of materials and manufacturing process.

CELENIT ABE is PEFC™ certified. Also available with FSC® certificationSound absorption value NRC : upto 0.90. Reaction to fire acc. to EN

13501-1: B-s1, d0. EC Conformity Certificate Reg. No.: K1-0751-CPD-209.0-02-01/2011.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and fixing Triangular Box ceiling is manufactured from light weight G.I and folded into U Shape profiles. Each panel has anominal cell wall

thickness of 15mm to give a precise engineered ceiling appearance. It has a width of 15mm and height between 50-60mm. Maximum length

2.08 MR available is 2 metre and its thickness is(.35mm) in G.I. It has equilateral trinagles having each side length 175mm. It allows fire detection and control 570.00 sq m 4245.00 2419650.00

system, airconditioning and other services to be located within the ceiling void and we withstand the warranty against any manufacturing defect for

the period of two years from the date of supply.

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric coverings made

out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with weight of

200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission of 50%. The tear

strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric should be

humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French

decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer guidelines. It comes with 10- year

manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at room temperature using CLIPSO

PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush finish of tapered and square edges in desired

design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as per

manufacturer's standards to give an effect of ambient lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing / Pitch should be

atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr.

LED modules/ PCB should be positioned properly to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

TOTAL FALSE CEILING WORKS 4526502.50 9159622.00

3 WALL FINISHES WORKS

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for minimal frame, room dividing solutions.Single glazed

mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections ALT 50 of

size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The

profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary

Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90

Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view

at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile

Bottom Seal pair for additional accoustic. Glass thickness-10 (LSG).shall be included in the product.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 3.00 cu m 131576.95 394730.85

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc.

including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 10.00 cu m 163814.10 1638141.00

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame

3.04 9.21 of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 155.00 Sqm 2015.75 312441.25

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter

to be measured).

Providing and Fixing ESDH 1236-22X922 mm Dtype Handle for wooden doors Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of

approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for wooden doors of approved make and model all

complete as per the direction of Engineer-in-charge.

Providing and Fixing FH-943 Double cylinder Floor Spring- for wooden door with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum

door width 950mm.Closing speed : 130°

3.08 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years 66.00 Each 8956.20 591108.92

Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in

cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and Fixing EFS ACC-001,002 top and Bottom Strap for wooden doors of approved make and model all complete as per the direction of

Engineer-in-charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole for wooden doors of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing ECY 1060- 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with Top-Bottom Patch,pivot and Bottom Patch Lock Maximum door

weight 100 Kg. Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold open.Suitable for

3.13 MR Weight of floor spring approx : 6kg 169.00 Each 9858.00 1666002.00

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top &

3.14 21.18 bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all 415.00 Sqm 4540.70 1884390.50

complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with

customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at

3.15 MR 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 632.00 Sqm 2467.00 1559141.81

3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market Department. Contractors payment

wouldn't be released until & unless he/she produces orginal warranty certificate from the manufacturer.

Supply and installation of Automatic Horizontally Retractable Acoustical Wall(s) as shown on the architectural drawings.

Track and Rollers: Top hung system with track and heavy duty roller system. Supplied with necessary track plates, track strips, threaded rods,

nuts and washers, alignment pins etc. Tracks are supported by adjustable steel hanger brackets connected to structural support pairs of 12mm

diameter threaded rods. Brackets supports the load bearing surface of the track. Track consists of natural architectural-grade aluminum alloy

capable to bear the per panel load of 800 Kgs. The transfer areas are provided with aluminum junctions, switches and curves to ensure smooth

transition of panels in the parking. The trolley is made of steel and provided with stainless steel rollers to ensure durability and smooth operation held

with the 16mm bolt connected to the frame.

Suspension System: The ceiling track is to be fixed with an adjustable steel suspension of threaded rods. This steel suspension should be

adjustable to ensure absorbtion of the eventual deflection of the ceiling. The threaded rods should be protected against corrosion.

Wall Panels: 110mm thick standard panels, filled with sound insulation materials are provided with MDF cover boards. The panels are

interconnected by means of a concave / convex interlocking aluminum anodized profiles provided with an integrated EPDM magnetic strip and a

vinyl acoustic seal running along the height of the interlocking profile. The skeletal frame of each element is constructed of a non-deflecting zinc

3.16 MR coated steel tube with the aluminum anodized edge protecting profiles on both sides of the steel frame, bolted together. The cover boards are of 31.00 sq m 55405.00 1717555.00

16mm thick MDF board, held in acoustic free suspension with the skeletal frame and within the side profiles. Each panel to have top and bottom

operable EPDM pressure seals operated by a crank handle to ensure optimum contact pressure of 1500N. The system is equipped with an

adjusting panel at one end of the wall. This panel normally at the closing end of the wall has a telescopic adjusting panel built with the same

materials as the other panels and is operated, together with the top and bottom seals, by an internal three-way spindle mechanism. The telescopic

sliding element stroke is 120 mm. There are aluminum profiles provided on both sides of the walls for better acoustics. In case of a provision of a

door within the wall, the door frame jambs is provided with retractable seals for complete and tight closure of the door panel to the floor. In case of a

provision of double door within the wall, there is a provision of active and inactive leaves for the door. Rrecessed door handles in satin stainless

steel fininsh are provided for the doors.

Sonic Barrier above False Ceiling: A sonic barrier between true slab and tracks is provided above false ceiling to the true ceiling. In case of a

height more than 1000mm special MS structural arrangement and sonic arrangement is provided at an extra cost in consultation with the architect /

Providing and fixing Bollard Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 15 mm thick Grooved wooden

acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design / Architects’ approval, the wooden

3.17 MR acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the edge of panel shall be Tounge 539.00 Sqm 3858.44 2079697.78

and groov to be fixed with clips on aluminium profile designed specially fo the panel. the panel will be mounted with the help of clips on Bollard

Aluminium extruded Keel. The grooved acoustic panel laminated in desired shade as per Engineer In charge / Architect’s approval.

Providing and supplying Acoustical Wall Panelling with square edges made of fiber glass substrate 25mm thick and wrapped on the front side with

3.18 MR an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of any size and 240.00 Sqm 2150.00 516000.56

shape providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers .

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and fixing woodwork 16 mm thick forming 600x600 mm tiles with Tegular edge. Perforation in the panel will be of 6mm/8mm/10mm or as

per architect approval, the wooden ceiling panels to be backed with black acoustic fleece with NRC of 0.4 (NRC 0.8 with 50mm GW of 48kg/m3).

The grid should be of 24mm/15mm wide T - section flanges color Black. The main T runner with length and size of 24X38mm/ 15X38mm made

3.19 MR from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced 600.00 Sqm 3564.00 2138399.43

between main T at 600mm center to centre to form a grid of 1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm

made of 0.30mm sheet to be interlocked at middle of the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X20 The

Wooden acoustic panel laminated in desired shade as per Engineer In charge / Architect’s approval.

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer, fixed with compatible

neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on RCC wall/any

other structure. Lacquered glass must be made industrially (using curtain coating process); opaque (if viewed against a support wall), uniformly

3.20 MR coated with PU lacquer (50 micron thick coating or more); panel to panel colour consistency (measured by photo spectrometer); highly durable 215.00 Sqm 4868.00 1046619.71

(passes hardness test for minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally

friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer

coating (compatible neutral cure silicon)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of

special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel

50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one

flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610

mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener

9.105 or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall

3.21 screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25mmx 25mmx0.5 mm), joint finisher and two coats of primer suitable for

board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095:

part 3 (Board with BIS certification marks)

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with Acrylic Solid Surface 12mm thick

sheets straight fabricated on a single face, finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate shall be with

suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural requirement & duly painted with anti-rust red oxide coating and covered with 12

mm thick water proof ply as per the design and dimensions approved. The proposal includes the cost of preparing appropriate substrate surface

over the civil structure provided, along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS

Providing of Ecoresin panel of size 1220mm x 2440mm with variety of inlay between panels of specified Gauge. The panels are made from ecoresin

sheet with engineered polyester resin with a thickness of 6 / 9.5 mm (+/- 5%)with a top/bottom finish as sandstone finish. The product conforms to

Class A impact rating in accordance with ANSI Z97.1-2004 at 1/8” thickness, has no detectable VOC off-gassing as measured under ASTM

standards D 5116 and D 6670, is Greenguard™ Indoor Air Quality certified and has a minimum of 40% post-industrial recycle content certified by a

recognized 3rd party certification group, such as Scientific Certification Systems (SCS). The design of the product is based on Varia produced with

ecoresin™ as approved make of Hunter Douglas as per specification & approval of Engineer-in-charge as per tender drawing.

Providing & supplying of Window Blinds per the approved sample Duette double honeycomb shades with easy rise operating system as per

following specifications fabric specifications: • Original Non-woven honeycomb shade shaving soft fabric appearance and high energy-efficient fabric

with high tear strength constructed out of Anti static, resilent, colour fast & Sanitized Treat 100% spun bonded non woven polyester fiber & precision

manufacture to form a hexagonally shaped duette pleat• Pleat dimension ¾”Honeycomb within a Honeycomb” with 3 air pockets for maximum

energy efficiency. •Shadings are duotone, with neutral tone facing the exterior and color facing the interior The Head rail. Shall measure 49.68 wide

and 36.66mm deep & thick 1.27mm extruded from 6063 T6 alu. alloy& shall be powder coated to a smooth finish with a thickness of 40 microns.

Fabric shall be constructed from spun-bonded polyester fiber, precision manufactured to form a hexagonally shaped, dual pleat, cellular

construction. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats

operate independent of each other providing superior pleat retention & structure strength. Installation brackets. shall be of high tension spring steel

suitable for overhead & wall mounting 30mm Duette Hartford mounting bracket. Head rail covered with Sydney Valance of height 80mm made up of

Aluminium & L shape moving Rail includes “Click & Engage" method of dimension 50mmX55mmsticked with integrated moving rail magnets

provide a streamlined look, reduce centre light gap, and promote easier operation. Polyster cord. Shall be 0.9mm in diameter & of woven hollow

core end cap shall be molded acrylic color matched to the head & bottom rails. Bottom rail shall be a single channel section, measuring 30mm wide

and 12.5mmdeep & thickness 1-1.2mm extruded from 5005 H-16 alu. Alloy & shall be powder coated with a smooth finish to a thickness of 15- 25

microns. Hold-Down bracket (optional) shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It shall be

suitable for sill, face or side facing. Cord Equalizer shall be injection melded from impact modified acrylic with a high flexural modulus

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller Blinds comprising of optima

screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having

fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be complying to ISO4674 & breaking resistance –

ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe installation,moulded plastic with steel spring support and inserted into the tube

end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade. The Shade when

lowering or raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal clutch for left

and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be inserted

into the tube end. (Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with covers

and used in right hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug

pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of80mm.The

ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way integral with

the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN shall be 2mm

diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ballchain.It is used for raising or lowering

action of the shades.

Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane size having head rail, rotator rail and

bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder coated and provided in standard natural white color.

The rolling tube should be made up of aluminium alloy from extruded profile of 34mm dia. The head rail dimensions should be of suitable size

according to the length of head rail and space available and finished with fabric cover matching with the louver fabric. The cassette should conceal

the working mechanism rotary-clutch. (White polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White

polycarbonate limit assemblies control vane over-rotation, located on either side of individual blinds. The room darkening fabric of Blind should be of

3.26 MR anti-static polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white 100% knit 50 sq m 10793.00 539650.00

polyester, the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100% polyester fiber (having green guard

certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN GUARD Gold certified for low-emitting products

to maintain Indoor environment. Up to 80% ultraviolet protection with vanes open and 90% with vanes closed. The shading to be operated by Easy

rise mechanism with a continuous cord loop operating system. All parts, components & hardware are in approved shade as per direction of

Engineer-incharge.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details of Architect.

Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate.

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to be constructed out of 18 mm MDF, finished with

3.28 MR 1mm. Thk laminate shade as per Engineer in charge’s approval. Cost to include edge margin in teak wood and poilshed in colour matching laminate. 330.00 RM 1850.27 610588.41

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 165.00 Sqm 1018.05 167978.25

3.30 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 165.00 Sqm 86.45 14264.25

13.4 12 mm cement plaster of mix :

3.32 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 2140.00 Sqm 214.30 458602.00

13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work 5794.00 Sqm 137.85 798702.90

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden

3.34 /steel frame work, complete as per direction of Engineer-in-Charge

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden

3.35 MR /steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board 355.00 Sqm 273.00 96915.00

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I. sheet with

zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness) fastened

to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater than 50 mm from either

3.36 MR end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the 550.00 Sqm 1022.00 562099.05

flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between C

Stud and web of U Track.

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss/ matt/ suede finish with high density protective surface

layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped

3.38 12.57 in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per 4058.00 Sqm 307.35 1247226.30

directions of Engineer-in-Charge.

TOTAL WALL FINISHING WORKS 12760500.30 21760878.42

Digitally signed by AMIT

SINGH 21:17:13 IST

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of

drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved

quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with

laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved. The cabinet boxes of

4.01 MR floor units will be supported by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed aluminum finish attached by 30.00 Sqm 7249.00 217470.00

hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only front face area of

cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from

400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of

drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved

quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with

4.02 MR laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved. The unit shall be fixed 30.00 Sqm 12165.00 364950.00

to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes

shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and

join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels 22.00 Each 3548.41 78064.91

4.02B MR Providing and fixing baskets 22.00 Each 4012.65 88278.20

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i)

Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions

including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with

4.03 22.3 water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying 36.00 Sqm 774.25 27873.00

blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet

should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and any other details as and when

4.04 MR desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed after due appproval from Engineer InCharge. 1.00 LS 2350000.00 2350000.00

TOTAL MISCELLANEOUS WORKS 27873.00 3098763.11

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) Model No. EACH 6 14614.00 87684.00

SIG-CHR-41233 or equivalnt

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

630x460x130mm Model No. XQS-WHT-43901 or equivalent

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 6 2267.00 13602.00

Model No. ZAS-WHT-9002 or equivalent

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 6 3065.00 18390.00

WALL FLANGE (Model No. ALDCHR-769L300X190 or equivalent)

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 6 13797.00 82782.00

SET, SIZE: 375X520X400 MM SLSWHT- 6953BIUFSM or equivalent)

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE

5012505 or equivalent)

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

FLANGE SIG-CHR-41053 or equivalent)

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

ADJUSTABLE WITH WALL FLANGE 15mm SIG-CHR-41083 or equivalent)

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET)

MR 9 WITH 8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK ALD-CHR-573 or EACH 6 2375.00 14250.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) Model

No. APCWHT- 5012500S or equivalent

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

11 and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.34 Providing and fixing toilet paper holder

1 Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

15 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 24 500.35 12008.40

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3

16 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster

and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 12 362.40 4348.80

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with

matching surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

18.7 one step CPVC solvent cement and testing of joints complete as per direction of Engineer

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 80 325.10 26008.00

18.7.3 25mm nominal outer dia pipes METRE 50 408.55 20427.50

18.7.4 32mm nominal outer dia pipes METRE 100 500.95 50095.00

18.7.5 40mm nominal outer dia pipes METRE 20 674.35 13487.00

18.7.6 50mm nominal outer dia pipes METRE 20 927.00 18540.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

18.8 cutting chases and making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.

18.8.1 15mm nominal outer dia pipes METRE 103 441.15 45438.45

18.8.2 20mm nominal outer dia pipes METRE 45 513.75 23118.75

18.8.3 25mm nominal outer dia pipes METRE 10 626.05 6260.50

18.8.4 32mm nominal outer dia pipes METRE 10 712.75 7127.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

21 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 6 708.40 4250.40

2 Digitally signed by AMIT

SINGH 21:17:13 IST

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes

for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including

all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with

or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils,

suspended from floor under false ceiling or embedding the pipes laid under floors / building

22.0 in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone

MR aggregate 20 mm nominal size) including cost of shuttering for proper completion of the

work, breaking and making good the walls and floors etc. after pipes have been duly laid

and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work

includes commissioning of all pipes lines as per drawings and specifications and as

directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 200.00 536.00 107200.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 40.00 416.00 16640.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 24 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 24 536.00 12864.00

MR 25 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 24 726.00 17424.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER

CONCEALED DIVERTOR FOR BATH & SHOWER SIGCHR-41079

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER

MIXER SPTCHR-41429

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM

MR 29 ROUND EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS EACH 6 21707.00 130242.00

STEEL WITH CHROME PLATED) WITH RUBIT CLEANING SYSTEM OSACHR-70049

MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 9 12004.00 108036.00

MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER ONYCHR-59731 EACH 6 3969.00 23814.00

MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER ONYCHR-59741 EACH 6 3895.00 23370.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH

LOWER HANGER ONYCHR-59781

MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK ONYCHR-59791 EACH 6 1858.00 11148.00

Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER

as approved by engineer in charge/ client

3 Digitally signed by AMIT

SINGH 21:17:13 IST

Supply, Installation, Testing and Commisiong of TOWEL HOLDER as approved by

engineer in charge/ client

4 Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 24350 334.00 8132900.00

PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single

A.4 1.13 core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS Metre 20 537.00 10740.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 1918 122.00 233996.00

1.24.5 6 pin 15/16 amp socket outlet Each 275 197.00 54175.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 200 40.00 8000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

Digitally signed by AMIT

SINGH 21:17:13 IST

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 100 233.00 23300.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 600 1005.00 603000.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 600 1365.00 819000.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable RM 20 705.00 14100.00

(b) 3.5 C x 95 Sqmm XLPE cable RM 11 604.00 6644.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 15 504.00 7560.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 15 403.00 6045.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 20 345.00 6900.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

SINGH 21:17:13 IST

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 37 371.29 13737.73

E.2A MR Supply, Installation, Testing and Commissioning of USB port Socket in single module Each 380 1000.00 380000.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.3 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 10 9477.90 94779.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.4 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 27 6124.08 165350.16

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

E.6 MR modules for Floor Box Set 37 1241.00 45917.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 120 148.00 17760.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

MR unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along

MR with required suitable number of GI couplers for joining raceways and fixing GI brackets and

all accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 200 1279.37 255874.00

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 200 1027.52 205504.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Set 950 47.00 44650.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

1.21.2 25mm Metre Digitally

950signed by AMIT

SINGH 21:17:13 IST

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts

painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.14 1.19 insulated , shielded with fine tinned copper braid and protected with PVC sheath in the Meter 1300 47.00 61100.00

existing surface /recessed steeel/ PVC conduit as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 12 13838.00 166056.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

G.1 MR Colour: Gray Powder Coated, as per approved sample.

Digitally signed by AMIT

SINGH 21:17:13 IST

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -6 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

(c ) 125 Amps TPN MCB - 2 nos

Panel complete as above Each 3 200000.00 600000.01

15 MR UPS Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Two (2) nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 400 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

1 Nos. 250A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's

along with E/M interlocking

(a) 63 Amps, TPN, MCB - 4 nos

(b ) 40 Amps, TPN MCB - 16 nos

Digitally signed by AMIT

SINGH 21:17:13 IST

Panel complete as above Each 1 245082.86 245082.86

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 6 269.00 1614.00

on front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 2 292.00 584.00

on front side as required

Supply, Installation, Testing and Commissiong of 20 KVA True Online Double Conversion

UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based

Rectifier and IGBT Based Inverter Batteries:12 V, SMF Amararaja/Exide with minimum VAH

capacity of 15600 suitable for 30 minutes backup with each ups Along with Accessories

MR Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the SET 3 764186.25 2292558.74

directions of the engineer in charge. UPS should have availability of Input /Output isolator,

Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall not be less

than 94% from 25% to 100% Load

Supply, Installation, Testing and Commissiong of 20 KVA True Online Double Conversion

UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based

Rectifier and IGBT Based Inverter Batteries:12 V, SMF Amararaja/Exide with minimum VAH

capacity of 48000 suitable for 120 minutes backup with each ups Along with Accessories

MR Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the SET 1 1317896.53 1317896.53

directions of the engineer in charge. UPS should have availability of Input /Output isolator,

Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall not be less

than 94% from 25% to 100% Load

Supply, Installation, Testing and Commissioning of 10 KVA True Online Double Conversion

UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based

and IGBT Based Inverter Batteries:12V, SMF Amararaja/Exide with minimum VAH capacity

MR of 24000 suitable for 120 minutes backup with each ups Along with Accessories Rack, SET 1 826478.65 826478.65

Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the

directions of the

engineer in charge. UPS should have availability of Input /Output isolator, Inbuilt manual

bypass along with phase sequence corrector. UPS Efficiency shall not be less than 94% from

Total of Electrical items 15975005.00 7919401.99

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & M-2022)/ DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M-2022)/ DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

DSR (INR) NON-DSR (INR)

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

M.R. Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator

made of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass

3.0 wool covered with tissue paper ,elliptical volume control damper , calibrated differential pressure

sensor (DPT sensors) at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

M.R. 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 15 HP or as directed by the engineer in charge Nos. 6.0 120000.00 720000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted

5.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 12.0 17500.00 210000.00

respective VFDs as per "Approved Shop Drawings".

6.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity

with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the

M.R. impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete

a as required. This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in

all respect as per the directions of engineer in charge.

15000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 6.0 143910.00 863460.00

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return

air path as and where required of required sizes i/c control wiring,the damper shall be motorized and

spring return so as to close the damper in the event of power failure automatically and open the same

7.0 16.20 in case of power being restored. The spring return action shall be inbuilt mechanism and not

externally mounted. The damper shall also be closed in the event of fire signal complete as required

and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

8.0 M.R. Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

9.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume control dampers as per the specifications and

a shop drawings. SQM 20.0 5900.00 118000.00

- For Rectangular Ducts

Insulated Flexible Duct

Supply, Installation, Testing and Balancing of flexible ducting comprising of inner as well as outer skin

constructed out of aluminium & fibre glass insulation 25mm thick of minimum 24 kg/cu.m density

insulation sandwitched in between. Duct should confirm to fire rating standards BS-476 part 5, 6 & 7.

10.0 Flexible Ducts of following sizes as per approved shop drawings, specifications :

Universal (Jubilee) clamp should be provided to fix the flexible duct in the spigots/Butterfly Dampers

MR and covered with aluminium tape. Circular clip with chain/GI threaded rod to be provided to support

the flexible duct.

Supply, Installation and Testing of single piece GI round spigot made out of spinning process with

11.0 50mm height and having grooves on both sides and circular flanges. Spigots shall be installed on

main ducts to facilitate connection of flexible ducts.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supply, Installation and Testing of Butterfly damper of GI sheet construction with two flap with round

flange on one side and 10mm grove on other side for fixing of flexible duct with the help of band, 20

12.0 Gauge Frame 250mm dia & above, 22 Gauge Frame upto 200mm dia & 22 Gauge Blade in all sizes

as per thespecifications and shop drawings.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

13.0 rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,

16.12.1 hangers, supports etc. as per approved drawings and specifications of following sheet thickness

complete as required.

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

volume control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

18.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 100.0 1440.00 144000.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation and Testing of extruded aluminium powder coated air transfer grilles to be

provided at the door of toilets/pantry.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings

and specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so

there are no visible joints. Slot diffusers shall be complete with end caps either as end plates or end

angles or integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser

20.0 MR face could be optionally be fitted to the plenum box on site. Diffuser shall have provision to access

collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 50.0 12500.00 625000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of SQM 10.0 2850.00 28500.00

21.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen

to be got approved from consultants and Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The

22.0 16.23 joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre

16.21 to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet SQM 100.0 708.00 70800.00

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc.

complete as required and as per specifications

Digitally signed by AMIT

SINGH 21:17:13 IST

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,

CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can

29.0 MR customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier

architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including

dashboard, android/IOS apps, where ever requires. Dashboard should be customisable and IOT

Air Quality Monitor Nos 3.0 7580.00 22740.00

TOTAL HVAC WORKS 8917757.0 7670650.0

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 60 16415.00 984900.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

2 2 necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

3 3.00 Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

TR Indoor unit equipped with washable synthetic media pre-filter, fan section with low

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

3 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Digitally signed by AMIT

SINGH 21:17:13 IST

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

4 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

4.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 300 245.00 73500.00

4.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 240 331.00 79440.00

4.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 300 466.00 139800.00

4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 240 588.00 141120.00

4.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 707.00 70700.00

4.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 865.00 86500.00

4.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1022.00 51100.00

4.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1108.00 55400.00

7 8 Drain Piping

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

Total HVAC WORKS 2536515.00 225765.00

Digitally signed by AMIT

SINGH 21:17:13 IST

Schedule of Quantities: FTTO Switch & Cabling

S No Description Unit Qty Rate DSR Amount Non DSR Amount

SITC of 7-Port 10GbE Micro Switch PoE+/ ++ 2x SFP/ SFP+ Slots, 1/ 10GBase-R, 5 RJ-45

Ports, 1x 1/ 2.5/ 5G Base-T, PoE (PSE 802.3af/at/bt), 4x 10/ 100/ 1000T, PoE+ (PSE

A.01 802.3af/at), horizontal mounting, 50..57 VDC power supply including Power supply Power Nos. 140 73,303.00 0.00 10,262,420.00

Supply PoE+/++ 150W prim. 115..230VAC, 3x 1,5mm² 1m, sec. 54VDC / 2.8A, 1m, Combicon-

A.02 SITC of SFP+ 10G Transceiver LR MultiMode 1310nm, 10km, DDM, LC, -40..+85°C Nos. 280 11,687.00 0.00 3,272,360.00

SITC of Dual Band 4x4 Wi-Fi 6 Indoor Access Point 2.5 / 5 GHz Wi-Fi, Bluetooth, ZigBee 1x

1000 Base-T, 1x 1/2.5GBase-T, 1x PD, 12 VDC, managed, 0..50°C

SITC of Central Power supply 48V/54V DC power supply 19" 1U, 3 Slots for each

850W/54VDC rectifier, equipped with 3x 850W/54VDC Rectifier, 6x DC-output, 2x battery input,

6x circuit breaker, incl. management controller (SNMP) & Central Power supply 48V/54V DC

power supply 19" 1U, 3 Slots for each 850W/54VDC rectifier, equipped with 3x 850W/54VDC

Rectifier, 6x DC-output, 2x battery input, 6x circuit breaker, incl. management controller (SNMP)

Minimum Performance Parameter Compliance (Y / N) Efficiency ≥ 95,2 %

EMV EN 55022, Class B Saftety EN 300 386 Power Consumption Typ. 4.5 W Protection IP 20

A.04 Input 1 x L/N/PE, 230 VAC, voltage range 80 ... 300 Vrms, Frequency range 45-66 Hz, Nominal Nos. 6 249,831.00 1,498,986.00

Current 12A RMS Output -53.5 VDC, Voltage ragne -42 …-58 VDC, Power 2550 W DC output

Max. 6 pcs. / 2 … 30 A Ciruit breaker Hydraulic-Magnetic Fuse 2 x 50A dimension 1U Rack

mount 19" Operating temperature -35 … +60 °C (power reduction from 45 °C) Relative Humidity

95 % max., non-condensing Managemet controller SNMP Dimension 44.45 x 430 x 300 mm (h

x w x d) Features LVD & PLD, load sharing, integrated temperature sensor for temperature

compensation, compact and reliable.(Make : Cisco/Hirshman/Microsens/Versitron or equivalent)

SITC of 52-Port 10G Multi Fiber L3 Switch 19" 4x 1/10GBase-X SFP+-Slots, managed L3, 48x

1000Base-X SFP-Slots, OOB-Port (RJ-45),int. 100~240VAC (C14), console port (RJ-45)

SITC of SFP GbE WDM-Transceiver 1.25G BXSingleMode TX1310nm / RX1550nm, 10km,

DDM, LC simplex, -40..+85°C

SITC of Rack mount fibre tray, 1 RU 19" sliding patch panel supporting 48 way configuration in

B.03 LC Duplex. Panel should be loaded with 48 port LC duplex adaptor panel2 Nos of splice trays Nos. 3 488,426.00 0.00 1,465,278.00

with capacity of 24F. Should include Splice protector

B.04 SITC of Fiber Optic Breakout Kit for Singlemode, 2 Nos. Tubes Nos. 100 1,967.00 0.00 196,700.00

C Cables and Patch Chords

C.01 SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending radius 15x OD RM 6500 211.00 0.00 1,371,500.00

SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m.

SITC of Cat 6A Unshielded RJ45 Modular Plug (Male) with dust cap, ANSI/TIA 568, ISO/IEC

C.03 11801, IEEE 802.3at Type 4 PoE Rated, Power over DBase (100W), UL Listed, RoHS Nos. 900 788.00 0.00 709,200.00

Certified, UL2043 Air Handling Space Rated, green for FTTO.

Digitally signed by AMIT

SINGH 21:17:13 IST

SITC of Cat 6A U/UTP Cable 23 AWG Solid Bare Copper Conductor 4 Pair, 3P/ETL Verified as

per ANSI/TIA 568.2-D, LSZH Jacket with IEC 60332-3-22 Flame Rated, IEEE 802.3bt Type 4

PoE Rated, as per the specification in existing conduits/ raceways. The cable should have

flexible jacket and ripcord for easy strip ability. (1 Box = 305m).

C.05 SITC of RJ45, Cat6A connectors Nos. 40 90.00 0.00 3,600.00

D Network Rack and Other Accessories

SITC of Two-post Rack System should provide a reliable foundation for mounting

network/telecommunication equipment. The modular rack can be used to manage high

performance copper and fiber patch cables horizontal and vertical cable managers and

accessories if required, such as power outlet unit brackets. Aluminum, 42 RU, #12-24 Threaded

Mounting Holes, Black, 1pc + hardware kit and paint piercing bonding kit, 800X1000. Should

have 6/16A power strips for with 20 sockets

SITC of 42U 800x1000 Server Rack with perforation, Glass Door, Cable managemenet, 6/16A

power strips- 2 nos, Castors, 4 fan for cooling, Rack should have shelves - 4 nos

E Project Management

Penetration Testing, Vulnerability Assessment of the Network to access any threats - internal/

external exposure. The report should be submitted after complete assessment of all ports,

equipments, devices in the network including Documentation for the above FTTO solution with

Ring diagrams upto the complete satisfaction of engineer in charge.

F. Additional Items

Supply, Installation, Testing and comissioning of Router. Router should be a modular

aggregation platform. It should support broad band aggregation for voice, video, data,

and mobility services with QoS scaling to a large number of queues per device.

Router should have 4 nos. of 10/100/1000 Base-T ports and 4 nos. SFP based ports. Router

should have at least 1 open slots for additional LAN/ WAN modules other then asked

ports. Router should have 4x10 Gigabit SFP+ ports from day 1. Router should have minimum 4

GB RAM from day 1. Router should have DES, 3DES and AES Standards through dedicated

F.01 encryption module/processor. Should support IPSec with IKEv2 and Suite-B Encryption. Router Lumpsum 1 233,696.00 0.00 233,696.00

shall have hot swappable 1 internal power supply. Router should have a minimum

performance of 10 Mpps and 10 Gbps of bandwidth, Scalable to 10 Gbs in future.

Router should support static Routes, OSPFv2, OSPFv3, BGP4, MBGP, BFD, Policy

based routing, IPv4 and IPv6 tunneling, MPLS LDP, MPLS L3VPN, MPLS L2VPN , MPLS TE,

FRR Link & Node Protection, LDP, MPLS Static label, MPLS VRF-aware static labels,

LDP - / Router‘s Operating System should be tested and certified for EAL 4 or

above under Common Criteria Certification

Digitally signed by AMIT

SINGH 21:17:13 IST

Supply, Installation, Testing and comissioning of UTM based Firewall solution should be

Hardware based, Reliable, purpose-built security appliance with hardened operating system

that eliminates the security risks associated with general-purpose operating systems. It Should

support 1:1 high availability. It Should have minimum 4 x 10G supporting SFP+ interfaces & 12

x 100/1000/10 BaseT RJ45 ports to cater to connectivity from multiple service providers and

load balance them. The Firewall should have ultra-low latency . The IPSEC VPN should deliver

at least 10 Gbps throughput to ensure connectivity with Multiple colleges / University catering to

Data / Voice traffic over IPSEC tunnel. The Firewall should be able to handle very high

concurrent sessions like 20 Million or above and at least 200,000 of new sessions per second.

The solution should support Virtualization with 10 Virtual contexts scalable to 150 to help use

the logical Firewalls for internal / student projects run isolated with each other. The proposed

solution should have integrated IPS module with at least 10Gbps of throughput for deep pack

inspection of traffic and also should be able to inspect encrypted SSL traffic. The solution

should have at least 5 Gbps of Threat Protection throughput and the so that the entire traffic is

scanned before reaching the end user. The antivirus engine should be able to inspect the

encrypted traffic like HTTPS, SMTPS, POP3s , IMAPs, FTPs etc. The proposed system should

have integrated Web Content Filtering solution which can be used to block any unwanted sites /

category of sites to adhere to University IT guidelines. The Firewall & IPSEC VPN module shall

belong to product family which minimally attain Internet Computer Security Association (ICSA)

Certification or equivalent. The proposed system should have modules/Licenses for integrated

Web Content Filtering along with IPS, Application Control, Antivirus / Malware Protection & Anti

spam. Proposed solution should be an Appliance/Virtual Machine based solution.It should be

able to do Link Load Balancing feature as per direction of engineer in charge.

Supply, Installation, Testing & Commissioning of Load Balancer: Appliance based customised

Network Analyser for Network Traffic Analysis Appliance shall be Intel x86 based device with

secure intranet server with Linux Based operating system and relational databases for long

term storage. Appliance includes license for 100 units under control.

SITC of CAT 6 cable for Telephony system. Supplying and drawing of UTP 4 pair CAT 6 LAN

Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Supplying, installing, testing and commissioning of 24 port CAT 6 Patch panel with

transmission performance compliance with the ANSI/TIA/EIA 568C.2 standard. Should allow

for a minimum of 200 re-terminations without signal degradation below standards

F.05 compliance limit.Should have self-adhesive, clear label holders and white labels with the panel 20 7,011.00 0.00 140,220.00

Panel should be of 1U height with 24 port pre-loaded IO. IDC: Suitable for 22-26 AWG

stranded and solid wire compatible with both 110 & Krone punch down tools, Operating Life:

Minimum 750 insertion cycles support operating Temperature from -20° to +70°

F.06 SITC of 800 pair MDF box complete with Krone Modules Each 1 25,000.00 0.00 25,000.00

F.07 SITC of 200 pair MDF box with Krone modules Each 4 11,223.00 0.00 44,892.00

F.08 SITC of Armoured Jelly Filled Riser Cable -50 pairs Meter 150 250.00 0.00 37,500.00

SITC of Network Management and Monitoring Tool . The NMS should be able to monitor, report

F.09 appliances deployed across the network irrespective of Make . Should monitor and report Each 1 467,392.00 0.00 467,392.00

functioning of Servers, Active devices, Routers, Firewalls etc across the whole network

Digitally signed by AMIT

SINGH 21:17:13 IST

Supply, Installation, Testing and Commissioning of i7 12 th Generation, 16 GB RAM, 1 TB SSD,

Touch, Microedge, Anit Glare Display 27 inches with wireless keyboard and mouse, Intel UHB 1 105,000.00 105,000.00

F.10 Graphics complete in all respects Each

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome

camera with 2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR distance,Up to 120

dB WDR (Wide Dynamic Range),3D DNR (Digital Noise Reduction),H.265+, H.265,

H.264, MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal

Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Compression H.265+,

1 MR H.265, H.264, MJPEG,Behavior Detection Intrusion, Crossing line, Motion detection, Nos 10 29913.00 299130.00

Object left, Missing object,Intelligent Identification Face detection, Defocus, Scene

Change,PoE (IEEE802.3 af) Power consumption: Max 7.2W,Edge Storage Micro SD

Card, Up to 256GB, ANR Support,Working Environment -40°C ~ +60°C, Humidity ≤

90% RH(Non-condensing),Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 64Ch Embedded Network Video

2 MR Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Nos 1 215000.00 215000.00

Redundant power supply, Smart Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as

3 MR required.etc.all complete. Nos 1 25239.00 25239.00

Supply, Installation, Testing & Commissioning of 43" Flat Screen HD led (24X7) with

Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-

4 MR 232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor Nos 3 55000.00 165000.00

stand complete with making connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 3 5796.00 17388.00

CAT6 Supply, installation, testing and commissioning of of Shielded twisted pair CAT6 Cable

Cable (STP) complete etc as required 4 pair.

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire

with LED(Light Emitting Diode) maximum system power: 28W, 120 LM/W

system efficacy, colour temperature of 4000K, neutral white, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours, energy

efficient LEDs, CRI>80, luminous flux of 3360 lm, MacAdam 3, R9>0,

1 MR T.H.D≤10%, driver efficiency ≥ 88%, surge protection of 2.5kV, direct light no 174 3367.00 585858.00

emission, Aluminium body, polyester white powder coat applied over a 5-

stage pre-treatment, Prismatic diffuser for glare-free uniform light, UGR<19,

Electronic control gear

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode),

maximum system power: 12 W, Luminous flux of luminaire 1320 lm, 110

LM/W system efficacy, Colour temperature of 4000 K, Neutral white, CRI >

80, 230V constant current driver, 70% of luminous flux after 50,000 operating

hours; energy-efficient LEDs, direct light emission, housing in die-cast

aluminium, Polyester powder white coloured coat applied over a 5-stage pre-

treatment trim, prismatic diffuser for homogenous light distribution, ZHLS

(ZERO HALOGEN LOW SMOKE) wiring, Electronic control

gear,R9>0,MacAdam 3

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed

luminaire with LED (Light Emitting Diode), maximum system power 28 W,

luminous flux of luminaire 3080 lm, 110 LM/W system efficacy, direct light

emission CRI>80, colour temperature of 4000K, Neutral white, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours, energy

efficient LEDs, luminaire profile in aluminium, Plastic moulded end caps,

3 MR Polyester powder Aluminium white coloured coat applied over a 5- stage pre- no 194 4162.68 807559.92

treatment, high efficiency glare-free snap fit micro-prismatic diffuser for

homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal

wiring, integral Electronic control gear, adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max =

Digitally signed by AMIT

SINGH 21:17:13 IST

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commisioning of Recessed luminaire with

LED (Light Emitting Diode), maximum system power: 28 W, luminous flux of

2800 lm, colour temperature of 4000 K, Neutral white, 230 V constant current

driver, 70% of luminous flux after 50,000 operating hours, energy-efficient

4 MR LEDs, CRI > 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light no 36 2800.00 100800.00

emission, Luminaire housing in Aluminium Extrution, polyester white powder

coat applied over a 5-stage pre-treatment, Opal diffuser for glare-free uniform

light, integral electronic control gear,

Supply, Installation, Testing and Commisioning of Recessed downlight with

LED (Light Emitting Diode) maximum system power: 5W, Luminous flux of

luminaire 400 lm, Colour temperature of 3000 K, Warm white, CRI > 80, 230V

constant current driver,MacAdam 3, R9>0, 70% of luminous flux after 50,000

operating hours; energy-efficient LED, direct light emission, housing in die-

cast aluminium, Polyester powder white coloured coat applied over a 5-stage

pre-treatment ceiling trim, with reflector, beam angle of 24°, Electronic control

Protection class II, IP 20,

Supply, Installation, Testing and Commissioing of Pendant luminaire with LED

(Light Emitting Diode), maximum system power 32W, luminous flux of

luminaire 2880 lm, color temperature of 4000K, neutral white, direct light

emission, 230V, MacAdam 3,R9>0,constant current driver, aluminum support

profile, polyester powder coated grey applied over a 5 stage pre-treatment,

6 MR prismatic diffuser, Electronic Control Gear, no 226 6000.00 1356000.00

Protection Class I, IP 20, L1= 600 mm, L2= 600 mm, L3= 600 mm, H=

67mm, max. PL= 1500 mm

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable

1 17.2.4 photothermal detector complete with mounting base complete as required. No 210 2858.00 600180.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. No 21 2651.00 55671.00

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

7 17.2.11 complete as required. No 3 3267.00 9801.00

Supplying, installation, testing & commissioning of intelligent addressable duct detector

8 17.2.13 including suitable Photo detector complete with base as required. No 12 7814.00 93768.00

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable manual call point complete

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

11 17.3.1 MP3 player (including 6 zone button paging station) with seamless integration facility with No 1 126411.00 126411.00

main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

13 17.3.7 operating at 240 Volt AC Supply complete as required. NOS 6 145793.00 874758.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 1260 173.00 217980.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including

15 connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 900 89.00 80100.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

16 17.5.4 and accessories like coupler etc. as required. Metre 900 53.00 47700.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Digitally signed by AMIT

SINGH 21:17:13 IST

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, Installing, Testing & Commissioning of LED technology, High efficiency,

Emergency light s with Function Use as an emergency luminaire Testing system Stand

Alone, Housing Polycarbonate, Glow wire test : 850°C, RAL9003, Type of mounting Surface:

Recessed base for ceiling, double sided cone diffuser, plexi plate diffuser, Degree of

18 M.R. protection IP65, Operation Mode Non Maintained or Maintained & Non Maintained mode NOS 2 7637.00 15274.00

selectable, Connection voltage 230V -/+ 5% [220V-240V] 50-60Hz, Permissible ambient:

temperature +5°C to +40°C, Battery: Ni-Cd, Duration 3 hours, Viewing distance 20m or 30m,

Insulation class II, 20 mtrs. viewing distance, Dimensions in mm: 270x119x49; for 30m

viewing distance version: 371x170x62

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

19 17.3.9 microphone assembly complete as required. NOS 1 81756.00 81756.00

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

BMS Fire integration compatible with existing system

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 640 character liquid

crystal with backlit control compatible with existing system

TOTAL FIRE ALARM WORKS 2772781.00 793348.00

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of smart card

Supply Installation Testing & Commissioning of Access Control

Software Multi Reader and controller confuguration and

upgradable to Enterprise level with unliimited users. Databse

Supports: MS SQL, Oracle, and MS Access database types.

2 MR Type of technology supports: IRIS Sacnner, Biometric, Face, Nos 1 71,160.00 71,160.00

RFID , etc supports template management , Highly secured

communication with server,Allows for real- time monitoring of

system status and user activities with optional audio alerts.

tamper detection, network communication loss, and many other

system attributes.

SITC of Access IP Master Controller with Enclosure & Power

Supply- 1 door Universal 2 Reader TCP/IP Controller

Expandable upto 4 Reader with exit reader module,4

3 MR Programmable inputs & 4 outputs 100 mA MAX ),Temperature: 0 Nos 5 42,083.00 210,415.00

to 70°C (35 -150°F); Humidity: 20 to 80% RH (non-condensing) ,

3000 USERS & 3000 transactions,2 Reader.

Supply, Installation, Testing & Commissioning of 12V, 5 Amp.

SMPS with MS Box Certified.

Supply, Installation, Testing & Commissioning of Smart card

Frequency Excitation (13.56 MHz) Mifare/I- class technology

5 MR smart Card. Memory Type EEPROM,Complies with ISO/IEC Nos 400 143.00 57,200.00

standards for thickness. Lifetime Warranty.

Supply Installation Testing and Commissioning of double leaf

6 MR 600 LBS Door Electro Magnetic Lock with complete compatiable Nos 10 4,092.00 40,920.00

Bracket UL Listed.

Supply Installation Testing and Commissioning Touchless

7 MR Request to Exit button with detection range from 4 to 12 cm. Nos 10 853.00 8,530.00

Supply Installation Testing and Commissioning Fire Exit panic

8 MR Bar single/double Door with EM lock and required accessories all Nos 10 13,670.00 136,700.00

Supply Installation Testing and Commissioning Emergency Door

9 MR Release Button, Gree, Key Resettable, DoublePole Double Nos 10 616.00 6,160.00

Supply Installation Testing and Commissioning of Cat 6 Network

Supply Installation Testing and Commissioning of 8 Core-

conductor20 to 22 AWG.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supply Installation Testing and Commissioning of AC 3 Core

12 MR Plain Copper conductor, PVC insulated. Mtr 100 50.00 5,000.00

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

13 MR cutting the wall and making good the same in case of recessed

conduit as required

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR DESCRIPTION UNIT RATE TOTAL TOTAL AMOUNT

S No DSR DESCRIPTION UNIT RATE TOTAL TOTAL AMOUNT

2022/ MR QTY AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on

the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread

to sprinkler head (Outlet) 15mm NPT female thread

with reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) SITC CO2 gas nozzle type - 9 Litre capacity (IS:15683). 18 NOS 12069.75 217255.49

Digitally signed by AMIT

SINGH 21:17:13 IST

SITC of Mechanical Foam gas cartridge type. 9 Kg

capacity (IS:15683).

SITC of ABC dry powder stored pressure type 6 kg

capacity (IS:15683).

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTIITES: AV SYSTEM

S No Item Item Description Qty Unit Rate DSR Amount Non DSR Amount

A.1 AV System-Large Conference Room (55 pax)

SITC of Modular Active LED 6 ftx10 ft, 1.6 mm pixel pitch, with 600Nits

1 Active LED brightness including Video Wall controller, Connecting Cables, Mounting 1 Nos. 2,430,435.00 2,430,435.00

SITC of 15 inch Flush mount display monitor Resolution: 1366 x 768

Resolution Type: WXGA,Static Contrast Ratio: 500:1 (typ), Dynamic Contrast

2 Flush Mount display Ratio: 10M:1, Light Source: LED, Colours: 262K 6 Nos. 84,130.00 504,780.00

Colour Space Support: 6 bit true, Brightness: 160 cd/m², Aspect Ratio: 16:9

Supply, Installation, testing and commissioning of wireless digital boundary

layer (flush mount) Microphone with 18 or more channel, RF output 80mW or

Conference Chairman, more, Cardioid pickup pattern, Frequency range : 1880 to 1930 MHz,

3 Connectivity : RJ-45, 256-bit AES Encryption (specifications includes single 28 Nos. 140,930.00 3,946,040.00

Delegate System

microphone set of transmitter and receiver) etc and complete as required.

(Master control for Chairman for mute all - Chairman unit- 2 nos)

Supply, Installation, Testing and Commisioning of complete VC solution with

VC with voice tracking codec along with USB voice tracking eagle eye camera (Model -12 X zoom

camera plus should be compatible with Microsoft teams)- RECORDING OF MEETING?

Supply, Installation. Testing and Commisioning of 32 x 32 channels of Dante

AES67-enabled Dante endpoint 12 mic/line level inputs with AEC, 8 mic/line

5 DSP level outputs Gigabit Ethernet port, RS-232 serial port 4-pin GPIO, 2-line OLED 3 Set 607,608.00 1,822,824.00

display with capacitive-touch navigation, Rack mountable (1RU)

Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin

edge ceiling loudspeaker, 100V transformer power taps : 24,12,6, watts,

6 Ceiling speakers Conical dispersion : 145° or more, impedance : 8, low impedance RMS 16 Nos. 17,296.00 276,736.00

continous power : 30watts, frequency range : 50 Hz - 20 kHz or better,

frequency response : 60Hz - 20KHz or better etc complete required as per

specifications.

Supply, Installation, testing and commissioning of power Amplifier 600 watt or

more, THD+N (@ 1 kHz) : < 0.3%, Technology : Class-D, Common mode

rejection ratio : 70dB or better, Temperature controlled FAN, Switching mode

7 Amplifier power supply, should have Protection features like : DC Short circuit & Over 1 Nos. 172,934.00 172,934.00

heating & Over load & Signal limiting etc, Built-in high pass filter and gain

adjustment option etc complete required as per specifications.

This HDMI Switcher/ Splitter 8x8 can connect 2HD signal sources with 8HD

display terminals. It can easily split 2-way HD signal sources to 8 HDTVs or

projectors which support HD. It also can amplify the HDMI signal. The two input

HD signal sources can be switched freely. The HDMI Switch/Splitter 2x8 can

support highest video resolution 3840x2160/30hz,Compatible with fully HDMI

1.3/1.4 Specification compliant. buffer HDMI signals at the same time, HDMI or

DVI to HDMI cables used for inputs and outputs. Included IR remote adapter

for operational flexibility and easy control, no manual clicking the select button

needed. Support single high definition display and multiple output HD signal

sources, such as DVD Players, A/V receiversand Set Top Boxes, 360 Sky Box

Freesat Virgin Bluray Player DVD HDTV Projector Camcorder HTPC Laptop

Digitally signed by AMIT

SINGH 21:17:13 IST

HDMI Distribution Amplifier 1 Input 6 Output, Supports computer video up to

1920x1200, including HDTV 1080p/60 and 2K

9 HDMI DA Supported HDMI specification features include data rates up to 6.75 Gbps, 1 Nos. 115,307.00 115,307.00

Deep Color up to 12-bit, 3D, Lip Sync, and HD lossless audio formats

SITC of cable enclosure with tilt up lid Multiregion power socket, , Pass

10 Cable Cubby through holes for HDMI, Audio, VGA & LAN connectivity etc. as required 6 Lot 39,261.00 235,566.00

Complete as per specification & as required.

Supply, installation, testing and commissioning of of 2.5 Sqmm x 2 core ATC

11 Speaker Cables 300 Rmt 117.00 35,100.00

copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables .

CAT6 Cable (DSR Supply, installation, testing and commissioning of of Shielded twisted pair

1.53.1) CAT6 Cable (STP) complete etc as required 4 pair.

Supply, installation, testing and commissioning of of 35' 15–pin HD & 3.6mm

13 Audio Cable 1 Set 7,946.00 7,946.00

Stereo Audio Cable

Supply, installation, testing and commissioning of of 12' 15–pin HD & 3.5mm

14 Audio Cable 1 Set 5,125.00 5,125.00

Stereo Audio Cable

Supply, installation, testing and commissioning of of Various Connectors For

15 Connectors 1 Lot 9,353.00 9,353.00

Above Mentioned Configuration etc. all complete.

Supply, Installation, Testing and Commissioning of Networking Rack, Front

Glass Door Unit and Grilled back door unit, lockable Door unit, Suitable Load

16 Network Rack Rating . Pillar of frame must be aluminum and Rest plated are steel, Powder 1 Nos. 22,902.00 22,902.00

Coated Rack with Castors, Fan, Cable Manager, Full Tray Unit, PDU complete

in all respect as required.

HDMI extender Transmitter -Reciever Set running over Shielded CAT6/6A

cable to carry HDMI signal over long distance

Intel Core i7 12th Generation, 16 GB DDR4 RAM, 264GB SSD, 1000 mbps

gigaLAN, 450 mbps WI-FI, bluetooth Windows 10 Pro License Pre-Loaded,

18 OPS HDMI 2.0, Mini DP, USB 2.0 x 2 USB 3.0 x 2, USB C TYPE X1, Audio In, Audio 7 Nos. 44,870.00 314,090.00

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

19 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 5 Nos. 6,500.00 32,500.00

detailed technical specifications as attached

20 USB Extender SITC of USB cables Extendre 10 meters etc all complete 1 Nos. 6,730.00 6,730.00

SITC of 55" diplsay panel with IPS technology, 16:9 aspect ratio, 2840 x 2160

(4K) native resolution, 500 nits brithness, 178 x 178 degree viewing angle, hard

coating (3H) minimum surface treatment, should be anti glare treatment,

21 55 inch TV for audience should be 24 hours operational hours, should be usable in landscape or protrait 4 Nos. 85,000.00 340,000.00

modes, should have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should

have RS232C in/out, RJ45 In, IR receiver in, pixel sensor in etc all complete.

SITC of Digital Signange/ Room booking display with scheduling option, Red

22 Digital Signage 1 Nos. 112,174.00 112,174.00

Green Indication for Busy/ meeting goingon option.

A.2 AV System-Court

Dome Camera for Live Supply, Installation, Testing and Commisioning of Fish eye dome camera 12

TV feed MP with 360 degree view 2 for judges with voice

PTZ camera 12X zoom, quad stream with Voice Tracking to focus on Lawers

Digitally signed by AMIT

SINGH 21:17:13 IST

SITC of 55" diplsay panel with IPS technology, 16:9 aspect ratio, 2840x2160

(4K) native resolution, 500 nits brithness, 178 x 178 degree viewing angle, hard

coating (3H) minimum surface treatment, should be anti glare treatment,

3 55 inch TV for audience should be 24 hours operational hours, should be usable in landscape or protrait 4 Nos. 85,000.00 340,000.00

modes, should have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should

have RS232C in/out, RJ45 In, IR receiver in, pixel sensor in etc all complete.

43 inch TV for case SITC of court case room number TVUHD display- 43' with Laptop for displaying

number case number etc

5 Audio Switcher SITC of Audio Switcher 32 channels with Large conference Room 1 400,000.00 400,000.00

Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin

edge ceiling loudspeaker, 100V transformer power taps : 24,12,6, watts,

6 Ceiling Speakers Conical dispersion : 145° or more, impedance : 8, low impedance RMS 6 16,826.00 100,956.00

continous power : 30watts, frequency range : 50 Hz - 20 kHz or better,

frequency response : 60Hz - 20KHz or better etc complete required as per

specifications.

Supply, Installation, testing and commissioning of power Amplifier 240 watt or

more, THD+N (@ 1 kHz) : < 0.3%, Technology : Class-D, Common mode

rejection ratio : 70dB or better, Temperature controlled FAN, Switching mode

7 Power Amplifier power supply, should have Protection features like : DC Short circuit & Over 1 154,239.00 154,239.00

heating & Over load & Signal limiting etc, Built-in high pass filter and gain

adjustment option etc complete required as per specifications.

Supply, Installation. Testing and Commisioning of 12X12 channels of Dante

AES67-enabled Dante endpoint 8 mic/line level inputs with AEC, 8 mic/line

8 DSP level outputs Gigabit Ethernet port, RS-232 serial port 4-pin GPIO, 2-line OLED 1 607,608.00 607,608.00

display with capacitive-touch navigation, Rack mountable (1RU)

SITC of 16 INPUT AND 16 Output HDMI Matrix Switcher It can easily split 2-

way HD signal sources to 8 HDTVs or projectors which support HD. It also can

amplify the HDMI signal. The two input HD signal sources can be switched

freely. The HDMI Switch/Splitter 2x8 can support highest video resolution

3840x2160/30hz,Compatible with fully HDMI 1.3/1.4 Specification compliant.

9 Matrix Switcher buffer HDMI signals at the same time, HDMI or DVI to HDMI cables used for 1 1,250,000.00 1,250,000.00

inputs and outputs. Included IR remote adapter for operational flexibility and

easy control, no manual clicking the select button needed. Support single high

definition display and multiple output HD signal sources, such as DVD Players,

A/V receiversand Set Top Boxes, 360 Sky Box Freesat Virgin Bluray Player

DVD HDTV Projector Camcorder HTPC Laptop

SITC of Audio Recording device for recording all proceedings in HD audio,

supporting inputs from VC, Microphone with date and time tag

SITC of Gooseneck wired microphone, 380mm, frequency range-50-20000 Hz,

, Sensitivity-20mV/Pa, , Cardiod Polar Pattern, Balanced XLR Audio Output

12 Cable Cubby SITC of Cable cubby with Power, LAN, HDMI port, USB input ports 10 Nos. 17,296.00 172,960.00

13 Floor Box Floor BOX with USB point with fast charger 10 Nos. 11,684.00 116,840.00

SITC of 24-Port Layer 2 Stackable Managed POE Gigabit Switch, 20 x

10/100/1000BASE-T POE ports, 4 x 10G SFP+ ports, Switch Resource

14 Switch Management (SRM) for flexible management of system resources, , MPLS 1 Nos. 162,863.00 162,863.00

L2VPM/L3 VPN support,

Intel Core i7 12th Generation, 16 GB DDR4 RAM, 264GB SSD, 1000 mbps

gigaLAN, 450 mbps WI-FI, bluetooth Windows 10 Pro License Pre-Loaded,

15 Mini Form factor PC HDMI 2.0, Mini DP, USB 2.0 x 2 USB 3.0 x 2, USB C TYPE X1, Audio In, Audio 5 Nos. 58,000.00 290,000.00

Out- Mini Form Factor with Type C

Digitally signed by AMIT

SINGH 21:17:13 IST

B. AV System-Chairperson & Members

SITC of 4K 86" display with inbuilt OPS, multi touch, should have windows 10

professiona, suport one touch switching to windows and android, i5, 8 gb RAM,

DLED backlight display, 3b40*2160, brightness 450 nits, IR tocuh 10 point,

1 85 inch LED TV LAN input interface, HDMI input x 2, VGA input port, PC AUDIO INPUT, USB 2 Nos. 490,760.00 981,520.00

interface of external device touch, USB 2.0 X 2, should have inbuilt speaker etc

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

2 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 2 Nos. 842.00 1,684.00

detailed technical specifications as attached

3 USB Extender SITC of USB cables Extender 10 meters etc all compelte 2 Nos. 7,946.00 15,892.00

SITC of Video Conferencing Bar with HD Camera, builtin speakers, built in

4 Video Conference Microphone, HDMI out for displays, Supporing H.264, H.265 6 Nos. 120,000.00 720,000.00

SITC of 65" display panel 16:9 aspect ratio, 2840x2160 (4K) native resolution,

350 nits brithness, 178 x 178 degree viewing angle, hard coating (3H) minimum

surface treatment, should be anti glare treatment, should be 24 hours

5 65 inch TV for Members operational hours, should be usable in landscape or protrait modes, should 4 Nos. 125,000.00 500,000.00

have atleast 2xHDMI, DP, DVI-D, RGB, Audio, RJ45 In, IR receiver in, pixel

sensor in etc all complete.

SITC of 55" display panel 16:9 aspect ratio, 2840x2160 (4K) native resolution,

350 nits brithness, 178 x 178 degree viewing angle, hard coating (3H) minimum

55 inch TV for surface treatment, should be anti glare treatment, should be 24 hours

6 operational hours, should be usable in landscape or protrait modes, should 1 Nos. 85,000.00 85,000.00

have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB RJ45 In, IR receiver in,

pixel sensor in etc all complete.

C. AV System-Chairperson Conference Room

SITC of 98" smart 4K LED Display,Native Resolution 3840 x 2160 (UHD),

Brightness Minimum 490cd/m2, Inputs HDMI-3,USB(3.0)-3,USB-(2,0)-2,OPS

Slot-1,RGB-1, LAN-1,SPDIF-1 or Higher, Output Audio-1( Audio out to

connect additional Speakers if required) , Built in Touch type IR spread /P

Cap/Incell/Inglass, Touch Accuracy ±1.5mm or less, Operating System Support

Windows 7/8/10/Windows XP/Linux/Mac/Android (Windows XP/Linux/Mac

Support one point touch) , Multi touch point Min 20 Points or Higher, White

Board ,Writing, Pen, Palm Eraser ,Save, Screen Capture, Storage, Tool Bar,

Air Class etc , Android 9.0 or better , Internal Memory (32GB),(Hisi 811, Dual

core A73+Dual core A53), DDR(4GB), Wi-Fi, Power Indicator, or higher,

Screen Share/Mira cast to Connect TAB/Mobile, Web Browser , 100-240V~,

50/60Hz, 32W(16W x 2) or higher , ISO9001, ISO14001,ISO45001,

The display should be a smart screen and touch enabled alongwith stylus/pen.

The display should also have provision for OPS PC.

Digitally signed by AMIT

SINGH 21:17:13 IST

SITC of Full HD Video Conferencing System endpoints (codecs), capable of

multi-party conferencing Minimum (1+5) Party. the codec shall have minimum

2 video inputs (1 x HDMI and 1 x HDMI/as per OEM's camera), minimum 2 x

HDMI video outputs, output resolution supported shall be minimum upto 1920

x1080, 30 fps (Tx and Rx).. Audio Inputs- Min 3 x IP Microphone, 1 X HDMI/1 X

3.5mm stereo line in; Audio Outputs- 1 x HDMI, 1 x 3.5 mm stereo /RCA line

out. The device shall be supplied with required licenses. All components of the

Poly VC should be VC system like Codec, Camera, Microphones should be from the same OEM.

compatible with Teams The system shall be inclusive of - 1 x Codec, It should support minimum 1 x

1080p60fps and 12x optical zoom with 1/2.33" CMOS Sensor or better.

Camera -It should support PAN Range of +/-100·, and Tilt of +20°/-20° &

Minimum 10 camera presets. The codec must be based on ITU standards &

hardware based and must be compatible with software based solution. It -

should support latest video standards H.264/H.265 and complete with standard

accessories as per the tender specifications.

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

5 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 1 Nos. 842.00 842.00

detailed technical specifications as attached

6 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 1 Nos. 7,946.00 7,946.00

D. AV System-6th Floor Meeting Room, 8th floor Meeting Room

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

1 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 4 Nos. 842.00 3,368.00

detailed technical specifications as attached

2 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 4 Nos. 7,946.00 31,784.00

3 Cable Cubby SITC of cable cubby with Power sockets, LAN ports-2, HDMI input, USB input 2 Nos. 32,718.00 65,436.00

E. AV System-Visitor Room, Lounge

SITC of 55" diplsay panel with IPS technology, 16:9 aspect ratio, 2840 x 2160

(4K) native resolution, 500 nits brithness, 178 x 178 degree viewing angle, hard

coating (3H) minimum surface treatment, should be anti glare treatment,

1 55" main LED display should be 24 hours operational hours, should be usable in landscape or protrait 1 Nos. 85,000.00 85,000.00

modes, should have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should

have RS232C in/out, RJ45 In, IR receiver in, pixel sensor in etc all complete.

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

2 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 4 Nos. 842.00 3,368.00

detailed technical specifications as attached

SITC of cable cubby with Power sockets, LAN ports-2, HDMI input, USB input

F. AV System-6th floor Meeting Room (2 nos.)

Digitally signed by AMIT

SINGH 21:17:13 IST

SITC of 55" diplsay panel with IPS technology, 16:9 aspect ratio, 2840x2160

(4K) native resolution, 500 nits brithness, 178 x 178 degree viewing angle, hard

coating (3H) minimum surface treatment, should be anti glare treatment,

1 55" main LED display should be 24 hours operational hours, should be usable in landscape or protrait 1 Nos. 85,000.00 85,000.00

modes, should have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should

have RS232C in/out, RJ45 In, IR receiver in, pixel sensor in etc all complete.

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

2 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 4 Nos. 842.00 3,368.00

detailed technical specifications as attached

3 Cable Cubby SITC of cable cubby with Power sockets, LAN ports-2, HDMI input, USB input 2 Nos. 30,000.00 60,000.00

4 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 4 Nos. 7,946.00 31,784.00

G AV System-8th floor Meeting Room (2 nos.) 0.00

SITC of 55" diplsay panel with IPS technology, 16:9 aspect ratio, 2840 x 2160

(4K) native resolution, 500 nits brithness, 178 x 178 degree viewing angle, hard

coating (3H) minimum surface treatment, should be anti glare treatment,

1 55" main LED display should be 24 hours operational hours, should be usable in landscape or protrait 1 Nos. 85,000.00 85,000.00

modes, should have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should

have RS232C in/out, RJ45 In, IR receiver in, pixel sensor in etc all complete.

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

2 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 4 Nos. 842.00 3,368.00

detailed technical specifications as attached

3 Cable Cubby SITC of cable cubby with Power sockets, LAN ports-2, HDMI input, USB input 2 Nos. 30,000.00 60,000.00

4 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 4 Nos. 7,946.00 31,784.00

I. AV System-Chief and IT

SITC of 55" diplsay panel with IPS technology, 16:9 aspect ratio, 2840 x 2160

(4K) native resolution, 500 nits brithness, 178 x 178 degree viewing angle, hard

coating (3H) minimum surface treatment, should be anti glare treatment,

1 55" should be 24 hours operational hours, should be usable in landscape or protrait 6 Nos. 85,000.00 510,000.00

modes, should have atleast 2xHDMI, DP, DVI-D, RGB, Audio, USB 3.0, should

have RS232C in/out, RJ45 In, IR receiver in, pixel sensor in etc all complete.

SITC of Premium High Speed Gold plated HDMI Cable 6' HDMI Cable, Up to

4K @ 60 Hz (4096x2160), UHD @ 60 Hz (3840x2160) 8 bit color depth, max.

2 HDMI Cable 18.0 Gbps data rate, Material: Tinned copper, 28 AWG and also to comply the 12 Nos. 842.00 10,104.00

detailed technical specifications as attached

SITC of cable cubby with Power sockets, LAN ports-2, HDMI input, USB input

4 USB Extender SITC of USB cables Extendre 10 meters etc all compelte 12 Nos. 7,946.00 95,352.00

Visitor Management Visitor Management KIOSK withdatabase Archival, Authentication and

Software Approval before releasing ticket

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES - GAS SUPRESSION SYSTEM

MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

MR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Gas Suppression System

SITC of CCOE Approved Seamless Novec 1230 Cylinder and Valve

M.R. 1 Assembly, 34 Ltrs. Capacity, filled with NOVEC 1230 Suppression Liquid 3 Nos 93958.00 281,874.00

(item No. 2), pressurized to 25 bar.

M.R. 3 SITC of Electrical Actuator for Master Cylinder. 3 Nos 17705.00 53,115.00

M.R. 4 SITC of Discharge hose 3 Nos 4325.00 12,975.00

M.R. 5 SITC of Local Manual Actuator 3 Nos 1831.00 5,493.00

M.R. 6 SITC of Cylinder Low Pressure Switch 3 Nos 2288.00 6,864.00

SITC of Nozzles, 360 Deg/ 180 Deg Throw, selection as per UL approved

M.R. 7 hydraulic flow calculations. 6 Nos 3052.00 18,312.00

M.R. 8 SITC of Suppression System Piping: 3 Lot 82903.00 248,709.00

M.R. 9 SITC of Gas Release Switch/Module 3 Nos 4833.00 14,499.00

M.R. 10 SITC of Abort Switch 3 Nos 2799.00 8,397.00

SITC of gas release panel with communication port for BMS and

synchronizing with Addressable FAS Panel

Digitally signed by AMIT

SINGH 21:17:13 IST

Schedule of Quantities: Furniture

S No Item Item Description Qty Rate Amount

Supplying & Placing in position of cabin table as per drawing. This precise Boss’s Desk of size :- (W)2800mm X (D)2330mm

X (H)770mm is designed with superb quality. The main table top shall be of 80mm thick MDF board with veneer. We can find

on the Sample design, beautiful color, elements large space and modernized styles. Functional and stately, with a sturdy

design style, this L - shape desk is sure to make a dramatic statement in the office.The table shall be made of Medium

Density Fibre Board and finished with Veneer and gloss polish. Featuring a cherry finish, with delicate panel moulding and a

fantastic size. The frame of the table gives the great look with panel upholstered wth PVC material which gives the

leatherette look.The table top of 80mm thick shall be supported with a combination of side panel of 70mmthickness. The

Chairperson - office desk comes with the side runner having enough storage space.The side table top shall be of 80mm thickness and rest

Main Table understructure shall be of 18mm thick MDF board with veneer finish. Pedestal of size :- L-480mm x D-450mm x H-

630mmshall have three drawers to store s sential. Drawers have the stylish handle which enhance the look. This piece will

be an all-encompassing workspace in the office in your home for years to come. The product shall be mom ISO

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council

(IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I

Mark Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

Supplying & Placing in position of back runner as per drawing. Size (W)2400mm X (D)400mm X (H)1040mm. The storage

unit top shall be made up of 18mm thick MDF board with veneer finish and understructure i.e. sides/ shelves/ bottom shall be

made of 18mm thick MDF board with veneer finish. The working edges shall be provided with matching veneer edge

Chairperson- banding. The back runner having openable shutters and 3 drawers with handle and locking arrangement. The product

Back Unit of table shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building

Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA

Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of

project architect/consultant & engineer in charge..

Supplying & Placing in position of high back as per drawing. The chair size

(W)673mmx(D)508mmx (H)1260mm, Max Height: 1260 & Min. Height 1200mm, Outer size handle to handle: 670mm,

Wooden Handle Size: 290mmx460mm, with gapping between padding and handle edge is 400mm, Seat Size:

500mmx550mm, Back Size: 760mmx600mm. The Contemporary styled chair rests on a wooden base with soft cushioning

upholstered in deep Brown Leather on the front and the back. The Side bolsters match the wooden base with dia

Chairperson-High 690mm and are padded on the top with foam along with accented leather panels on the side. The tall back rest is composed

3 of a central tufted panel with detailed stitching and a curved back that adds lumbar support. Function: Revolving,Pneumatic 1 85850.00 85850.00

Height Lift,Tilt Tension Control. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO

50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate,

SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned

above & image under the guidance and aprroval of project architect consultant & engineer in charge

Supplying & Placing in position of medium back chair as per drawing. Size: (W)660mm x (D)508mm x (H)1092mm.

Seat Size: 530mmx520mm, Back Size: 630mmx520mm Outer handle to handle size: 630mm. The Office chair that

everyones talking about, the Ultra is one of our premium visitor chair with supple leather upholstery. The chair has

comfortable cushion padding covered in Brown Leather upholstery. Scooped bucket seats add to its comfort with its

Chairperson- classy facia with a polished wooden base with dia 650mm and matching side bolsters with soft padding. The mid

4 Revolving visitor back has a central console for added lumbar support with single lever mechanism. Function: Revolving::Pneumatic 4 47268.00 189072.00

chair Height Lift::Tilt Tension Control::Centre Tilt. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS

45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance,

FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per

specification mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying and placing in position of Sofa with Luxury in leather as per drawing. The Skyler sofa seat depth- 515mm,

back height- 350mm, seat height -450mm, arm height- 590mm is a magnificent piece of furniture for a contemporary

living space. The magnificent frame slopes from the back to the seat giving a stately feeling to your seat. The soft touch

brown leather upholstery goes perfectly with the sink in cushions that make up the centre of the sofa. The sofa is a covered

in a combination of leather and leatherette with all the areas you can experiece are finished in leather and non funtional areas

Chairperson- 3 str are finished in leatherette. Set on a sleek stilt legs, the sofa frame has a unique panel detail that runs onto the cushions

5 as well. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, 1 120392.00 120392.00

Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark

Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

3 seater of size: (W)1960mm X (D)880mm X (H)760mm

Supplying and placing in position of Sofa with Luxury in leather as per drawing. The Skyler sofa seat depth- 515mm,

back height- 350mm, seat height -450mm, arm height- 590mm is a magnificent piece of furniture for a contemporary

living space. The magnificent frame slopes from the back to the seat giving a stately feeling to your seat. The soft touch

brown leather upholstery goes perfectly with the sink in cushions that make up the centre of the sofa. The sofa is a covered

in a combination of leather and leatherette with all the areas you can experiece are finished in leather and non funtional areas

Chairperson- 2 are finished in leatherette. Set on a sleek stilt legs, the sofa frame has a unique panel detail that runs onto the cushions

6 as well. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, 2 85446.00 170892.00

Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark

Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

2 seater of size: (W)1380mmx(D)880mmx(H)760mm

Providing and placing in position Centre Table. Overall Size : Width : 1000mm Depth : 650 Height : 430mm. TABLE

Chairperson- MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION

7 Secretary Level MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass. Complete all as per 1 23600.00 23600.00

Centre Table the dimension of Engineer-incharge. OEM should be ISO-9001, 14001, 18001, 45001, 50001, BIFMA certified.Complete all

as per the direction of Engineer in Charge.

Providing and placing in position Corner Table. Overall Size : Width : 600mm Depth : 60mm Height : 450mm.TABLE

Chairperson- MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION

8 Secretary Level MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass. Complete all as per 1 16520.00 16520.00

corner Table the dimension of Engineer-incharge. OEM should be ISO-9001, 14001, 18001, 45001, 50001, BIFMA certified.Complete all

as per the direction of Engineer in Charge.

Providing and placing in position Conference table.The overall size of the wortop shall be 4200mm x 1500mm x 740mm.

Worktop shall be made from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and

having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables. The Under-

structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming

Chairperson- to IS12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added

9 Secretary Level at bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm 1 142666.72 142666.72

Conference table CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2

cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is

provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard certified.Complete all

as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying and placing in position of high back chair as per drawing. Size :- 610mm(l)x 500mm(d)x 1300mm(h).The chair

made of full natural leather in yellow colour. It will comes in matte finsih in contemporary style. The chair arms two way

adjustable pu padded arms with up & down position. The seat and back made of ply: 12 mm thick hot pressed bwr plywood (is

grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

Chairperson- cushioning in back. Backrest support foam design based on symmetrical lumbar support and have multi-locking knee tilt

Secretary Level mechanism. Seat size is 510mm(l)x 610mm(h) & the back size is 640mm(l)x 530mm(h), seat maximum height is 610mm &

Conference High minimum height is 530mm & back height from floor maximum height is 1130mm & minimum height is 1040mm. The chair

back chair having gas lift 80mm telescopic haudraulic and base : 650 mm chrome plated and assembled with injection moulded black

polypropylene hub cap with smooth castors . The OEM shall be from ISO 9001:2015, ISO 14001:2015, 45001:2018, ISO

50001:2018,product shall be BIFMA, AOITA Greenguard level 2, IndoorAir Quality certified. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of medium back chair as per drawing. Size :- 640mm(L)X 500mm(D)X 1130mm(H) ,.The

chair made of full natural leather in yellow colour. It will comes in matte finsih in contemporary style. The chair arms two way

adjustable pu padded arms with up & down position. The seat and back made of ply: 12 mm thick hot pressed bwr plywood (is

grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

Chairperson- cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

Secretary Level cushioning in back. Backrest support foam design based on symmetrical lumbar support and have multi-locking knee tilt

11 mechanism. Seat size is 476mm (L)X 492mm (D) & back length @ 465mm, Seat max height- 610mm & mini height- 545mm. 12 37406.00 448872.00

back chair The chair having gas lift 80mm telescopic haudraulic and base : 650 mm chrome plated and assembled with injection

moulded black polypropylene hub cap with smooth castors . The OEM shall be from ISO 9001:2015, ISO

14001:2015,45001:2018, ISO 50001:2018,product BIFMA, AOITAGreenguard level 2, IndoorAir Quality certified. Complete

as per specification mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in

Providing and placing in position Visitors Chair with overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm.

The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and

molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25%

Chairperson- compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW

Secretary Level round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The

Conference Visitor tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame

chair through chrome plated high pressure die casted connector pipe.Complete all as per the direction of Engineer in Charge.The

OEM shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018,product shall be BIFMA,

AOITAGreenguard level 2, IndoorAir Quality certified.

Supplying & Placing in position of cabin table as per drawing. This precise Boss's Desk of size :- (L)2400mm x (D)2330mm x

(H)770mm is designed with superb quality. The main table top shall be of 80mm thick MDF board with veneer. We can find

on the Sample design, beautiful color, elements large space and modernized styles. Functional and stately, with a sturdy

design style, this L-shape desk is sure to make a dramatic statement in the office.The table shall be made of Medium

Density Fibre Board and finished with Veneer and gloss polish. Featuring a cherry finish, with delicate panel moulding

and a fantastic size. The frame of the table gives the great look with panel upholstered wth PVC material which gives the

leatherette look.The table top of 80mm thick shall be supported with a combination of side panel of 70mmthickness. The

Secretary/Member office desk comes with the side runner having enough storage space.The side table top shall be of 80mm thickness and rest

Main table understructure shall be of 18mm thick MDF board with veneer finish. Pedestal of size :- L-480mm x D-450mm x H-

630mmshall have three drawers to store s sential. Drawers have the stylish handle which enhance the look.This piece will be

an all-encompassing workspace in the office in your home for years to come. The product shall be from ISO

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC),

AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark

Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying & Placing in position of back runner as per drawing. Size (W)2400mmx (D}400mmx(H)1040mm. The storage unit

top shall be made up of 18mm thick MDF board with veneer finish and understructure i.e. sides/ shelves/ bottom shall be

made of 18mm thick MDF board with veneer finish. The working edges shall be provided with matching veneer edge

Secretary- banding. The back runner having openable shutters and 3 drawers with handle and locking arrangement. The product

Member Back unit shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building

Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA

Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of

project architect/consultant & engineer in charge.

Supplying and placing in position of a classic office 360 degrees revolving high back chair as per drawing. The overall size of

the chair shall be (W)660mm X (D)670mm X (H)1250mm, max seat height-580mm, mini seat height- 480mm, back back -

670mm, seat width-520mm, seat depth- 510mm with ultra soft touch leather upholstery for style and comfort. Sculptural in

design and superior in comfort, Hope executive chair envelopes you in its supple genuine leather. The cradling curves of the

backrest offer sublime comfort during your long working hours. While the solid wood looped arms and leg frame makes it

classic. The seat cushioning is done up with Brown leather upholstery and sits firmly on a sturdy solid wood base powered by

smooth castors. pneumatic height adjustment should have an adjustment stroke of 10+/-0.3 cm. The size of the pedestal

Secretary/Member

15 shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The seat and back are made up of 12 mm thick hot 5 44300.00 221500.00

High back chair

pressed BWR plywood (IS Grade - 303) upholstered with poly urethane foam. The chair seat has foam of density 30-35 (+/-

2kg /m3) and the backrest has a foam of 28 (+/-2kg /m3) . Dimensions tolerance / variations shall be within +/- 1 cm.. The

product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green

Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007,

SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the guidance and

aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of a classic office 360 degrees revolving medium back chair as per drawing. The overall

size of the chair shall be (W)660mm X (D)670mm X (H)1210mm, max seat height-560mm, mini seat height- 460mm, back

back - 580mm, seat width-520mm, seat depth- 510mm with ultra soft touch leather upholstery for style and comfort.

Sculptural in design and superior in comfort, Hope executive chair envelopes you in its supple genuine leather. The cradling

curves of the backrest offer sublime comfort during your long working hours. While the solid wood looped arms and leg frame

makes it classic. The seat cushioning is done up with Brown leather upholstery and sits firmly on a sturdy solid wood base

Secretary/Member powered by smooth castors. pneumatic height adjustment should have an adjustment stroke of 10+/-0.3 cm. The size of the

16 revolving visitor pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The seat and back are made up of 12 mm 15 39300.00 589500.00

chair thick hot pressed BWR plywood (IS Grade - 303) upholstered with poly urethane foam. The chair seat has foam of density 30-

35 (+/-2kg /m3) and the backrest has a foam of 28 (+/-2kg /m3) . Dimensions tolerance / variations shall be within +/- 1 cm..

The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian

Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO

21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the

guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of main cabin Table as per drawing. This precise Boss's Desk of size :- (L)2200mm X

(D)2000mm X (H)755mm is designed with superb quality. The Clint directors desk is a suave new office desk in our Catalog.

Made with a combination of engineered wood as particle board, this gorgeous desk has contrasting panels in black for a

contemporary look.The table top of 2200mm length x 900mm depth and 45mm thickness shall be Coupled with a runner and

storage of size :- L-2000mm x D- 450mm x H-660mm for your files and cabinets, the Clint is a desk meant for the discerning

tycoon. The overall side storage shall be made with 18mm thick particle board finished with 2mm thick PVC edge banding of

matching shade.The side storage shall be provisioned with openable shutter storage, 3 drawers (2 equal drawers+ 1 filing

17 Chief Main table drawer) pedestal and open storage. The table shall also be provisioned with a pedestal at opposite side of storage. The 4 144000.00 576000.00

pedestal shall be with a combination of 2 drawers and 1 filing drawer. With a warm walnut finish, the dual tone finish of the

desk adds to its overall style and finish.The font side of the table shall have design element finished in leatherite. The product

shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green

Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007,

SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the guidance and

aprroval of project architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying & Placing in position of low height storage unit as per drawing. Size- (L)1600mm X (D)450mm X (H)800mm. The

Unit is purposed from engineered wood and finished in a duet of colors. The storage cabinet top shall be made of 36mm thick

and rest understructure shall be made of 18mm thick while back 9mm thick prelaminated particle board. The cabinet boast of

2 vertically stacked shelves to keep your files and documents safe and dust free. The Clint office series comprises of a

18 Chief Back unit selection of desks, file cabinets, sideboards and multipurpose office storage units for a complete office setup. The product 4 53800.00 215200.00

shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building

Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA

Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the guidance and aprroval

of project architect/consultant & engineer in charge.

Supplying and placing in position of high back chair as per drawing. Size :- 610mm(l)x 500mm(d)x 1300mm(h).The chair

made of full natural leather in yellow colour. It will comes in matte finsih in contemporary style. The chair arms two way

adjustable pu padded arms with up & down position. The seat and back made of ply: 12 mm thick hot pressed bwr plywood (is

grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in back. Backrest support foam design based on symmetrical lumbar support and have multi-locking knee tilt

Chief High back mechanism. Seat size is 510mm(l)x 610mm(h) & the back size is 640mm(l)x 530mm(h), seat maximum height is 610mm &

chair minimum height is 530mm & back height from floor maximum height is 1130mm & minimum height is 1040mm. The chair

having gas lift 80mm telescopic haudraulic and base : 650 mm chrome plated and assembled with injection moulded black

polypropylene hub cap with smooth castors . The OEM shall be from ISO 9001:2015, ISO 14001:2015, 45001:2018, ISO

50001:2018,product shall be BIFMA, AOITA Greenguard level 2, IndoorAir Quality certified. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of medium back chair as per drawing. Size :- 640mm(L)X 500mm(D)X 1130mm(H) ,.The

chair made of full natural leather in yellow colour. It will comes in matte finsih in contemporary style. The chair arms two way

adjustable pu padded arms with up & down position. The seat and back made of ply: 12 mm thick hot pressed bwr plywood (is

grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

Chief revolving cushioning in back. Backrest support foam design based on symmetrical lumbar support and have multi-locking knee tilt

20 mechanism. Seat size is 476mm (L)X 492mm (D) & back length @ 465mm, Seat max height- 610mm & mini height- 545mm. 12 37406.00 448872.00

The chair having gas lift 80mm telescopic haudraulic and base : 650 mm chrome plated and assembled with injection

moulded black polypropylene hub cap with smooth castors . The OEM shall be from ISO 9001:2015, ISO 14001:2015,

45001:2018, ISO 50001:2018,product shall be BIFMA, AOITA Greenguard level 2, IndoorAir Quality certified. Complete as

per specification mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in

Supplying and placing in position of cabin table as per drawing. Size :- (W)2000mm X (D)2220mm X (H)760mm. The

Meridian Desk is a dream come true for any entrepreneur and businessman who is looking for a regal desk that suits his

needs. Crafted with elegance from premium materials the desk. The glossy walnut finish adds value to the desk's design. The

desk table top carries a leather folio with an inbuilt wire management system for easy access. The desk has slender curves

and a stylish geometric pattern that flows

from end to end. Coupled with the desk is a movable runner and pedestal in which storage space is in abundance for stowing

Joint-Chief Main away your important files and folders. The side runner size:- 1400mm(L)x 400mm(D)x 660mm(H). The unit comes up with two

table openable shutters, a keyboard tray and one open shelf for cpu. Also it has provision of movable castors. The cabin table

comes up with a mobile pedestal of two drawers 400mm(L)x 450mm(D)x 550mm(H) with castors.. The product shall be

from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council

(IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate,

I Mark Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying & Placing in position of back runner as per drawing. Size (W)1600mm X (D)400mm X (H)750mm. The storage unit

top shall be made up of 18mm thick MDF board with veneer finish and understructure i.e. sides/ shelves/ bottom shall be

made of 18mm thick MDF board with veneer finish. The working edges shall be provided with matching veneer edge banding.

The back runner having openable shutters with handle and locking arrangement. The back unit having shutters with

Joint-Chief Back combination of glass panelled at 4 sides. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS

unit 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance,

FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per

specification mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in

Supplying and placing in position of high back chair as per drawing. Size :- 610mm(l)x 500mm(d)x 1300mm(h).The chair

made of full natural leather in yellow colour. It will comes in matte finsih in contemporary style. The chair arms two way

adjustable pu padded arms with up & down position. The seat and back made of ply: 12 mm thick hot pressed bwr plywood (is

grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in back. Backrest support foam design based on symmetrical lumbar support and have multi-locking knee tilt

Joint-Chief High mechanism. Seat size is 510mm(l)x 610mm(h) & the back size is 640mm(l)x 530mm(h), seat maximum height is 610mm &

back chair minimum height is 530mm & back height from floor maximum height is 1130mm & minimum height is 1040mm. The chair

having gas lift 80mm telescopic haudraulic and base : 650 mm chrome plated and assembled with injection moulded black

polypropylene hub cap with smooth castors . The OEM shall be from ISO 9001:2015, ISO 14001:2015, 45001:2018, ISO

50001:2018,product shall be BIFMA, AOITA Greenguard level 2, IndoorAir Quality certified. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of medium back chair as per drawing. Size :- 640mm(L)X 500mm(D)X 1130mm(H) ,.The

chair made of full natural leather in yellow colour. It will comes in matte finsih in contemporary style. The chair arms two way

adjustable pu padded arms with up & down position. The seat and back made of ply: 12 mm thick hot pressed bwr plywood (is

grade - 303 for seat and back) . Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

Joint-Chief cushioning in back. Backrest support foam design based on symmetrical lumbar support and have multi-locking knee tilt

24 revolving visitor mechanism. Seat size is 476mm (L)X 492mm (D) & back length @ 465mm, Seat max height- 610mm & mini height- 545mm. 27 37406.00 1009962.00

chair The chair having gas lift 80mm telescopic haudraulic and base : 650 mm chrome plated and assembled with injection

moulded black polypropylene hub cap with smooth castors . The OEM shall be from ISO 9001:2015, ISO 14001:2015,

45001:2018, ISO 50001:2018,product shall be BIFMA, AOITA Greenguard level 2, IndoorAir Quality certified. Complete as

per specification mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in

Providing and placing in position of main table with overall size of table 1650 x 1950 x 750mm. The main table shall be of size

1650 x 750 x 750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-

laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-

build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25

mm thick MDF one side pre-laminate board confirming to IS14587:1998 with 0.4mm PVC membrane pressed on to top. The

DC/AC/PAO/DDO understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

Office Staff Main matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

table with ERU approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-

attached pedestal laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses

powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti

slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.Complete all as per

the direction of Engineer in Charge. The OEM shall be from ISO 9001:2015, ISO 14001:2015, 45001:2018, ISO 50001:2018,

Product is Greenguard certified. Complete as per specification mentioned above & image under the guidance and aprroval of

project architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying & Placing in position of low height storage unit as per drawing. Size- (L)1200mm X (D)450mm X (H)750mm. The

Unit is purposed from engineered wood and finished in a duet of colors. The storage cabinet top shall be made of 25mm thick

and rest understructure shall be made of 18mm thick while back 9mm thick prelaminated particle board. The working or

nonworking edges shall be provided with matching machine pressed 2mm thick PVC edging using with special hot melt glue

DC/AC/PAO/DDO at hot temperature. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free.

26 The storage shall be provisioned with openable shutters having lock and handles. The product shall be from ISO 78 40000.00 3120000.00

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC),

AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark

Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

Providing and placing in position High back chair. The SEAT/BACK ASSEMBLY: The seat is made up of 1.2 + 0 1cm thk. hot

pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mould d

glass filled nylon & upholstered using Quitted Leatherette fabric * SEAT SIZE(Larger Seat Depth) : 47.0 cm (W) x 51.5 cm (D)

* SEAT SIZE(Standard Seat Depth) : 47.0 cm (W) x 49.5 cm. (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H).HIGH

RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and

hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the

following features • Up-Down adjustment— 8 steps (8.0+0.Scm range)• Height adjustable armrest structure which is Chrome

plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY:

The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The

Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an

adjustment of 8.0 + 0.5 cm in height FRONT PIVOT SYNCHRO MECHANISM: The adjusta ble tilting mechanism is designed

with the following features.• 360° revolving type.• Single point control. • Front-pivot for tilt with feet resting on ground ensuring

DC/AC/PAO/DDO more comfort. • Tilt tension adjustment • 4-position locking with anti-shocK feature. • Seat/back tilting ratio of 1.2 NECXREST

High Back chair : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with Polyester fabric.

Neckrest is fixed to Back Assembly through Neckrest connector. Neckrest assembly has Weight adjustment of 4.2 + 0.5 cm

and rotation adjustment of oyerat! 76°+- 2°. The complete neckrest assembly is retro fit to the main chair. Pneumatic Height

Adjustment : The pneumatic height adjustment has adjustment stroke of 10.0+-0.3 PEDESTAL ASSEMBLY : The pedestal is

fabricated from 0.2 + 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub

cap and 5 nos. twin wheel castors. The pedesta! is 66.0+0 Scm. Pitchcenter dia. (76.0+1.0 cm with castors). COAT HANGER

: The Coat Hanger is made up of injection moulded glass filled nylon. The Coat hanger is retro fit and is fixed to the back

assembly. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. NECXREST : The

Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with Polyester fabric. Neckrest is

fixed to Back Assembly through Neckrest connector. Neckrest assembly has Weight adjustment of 4.2 + 0.5 cm and rotation

adjustment of oyerat! 76°+- 2°. The complete neckrest assembly is retro fit to the main chair.Complete all as per the direction

of Engineer in Charge.

Supplying and placing in posItion of 360 degrees revolving medium back chair as per drawing . Size :- (W)610mm X

(D)660mm X (H)1110mm, back height-590mm, depth- 525mm, max seat height- 545mm, mini seat height- 445mm. The chair

shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat

upholstered with mesh and fabric and cut foam. The novel S curve of the backrest ensures that the natural curve of the spine

is maintained while the adjustable Leaf Lumbar Support with C- Curve provides extra comfort and support to the lower back.

DC/AC/PAO/DDO Adorned with a ventilated body fabric, it keeps you calm even on the most stressful days. The Self-weight Multi-Locking

28 Mechanism lets you find your perfect position without having to make adjustments while the adjustable armrest further 220 21400.00 4708000.00

provides an ultimate ergonomic experience. The solid chrome base provides extraordinary support, and the 55mm castors

help in an easy smooth movement. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO

50001:2018, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX

Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image

under the guidance and aprroval of project architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and placing in position of conference table. It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and

approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 -

WP profile is used for connecting panels together. The product has a knock-down construction.Wire Management.An array of

Large Conference panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated(DFT 40-60 microns) is used for flow of wires and

29 cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece 1 466822.16 466822.16

injectionmoulded plastic part polymer component is fitted to pull out audio,video cables ontoworktop and connect devices

charger to power socket below worktop.Modesty Panel Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and

approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Supplying and placing in position of high back chair of as per drawing. Size :- (W)630mm X (D)660mm X (H)1305mm, max

seat height- 545mm, mini seat height- 445mm, seat depth- 525mm, back height- 700mm. The novel S curve of the backrest

ensures that the natural curve of the spine is maintained while the adjustable Leaf Lumbar Support with C-Curve provides

extra comfort and support to the lower back. Adorned with a ventilated body fabric, it keeps you calm even on the most

Large Conference stressful days. The Self-weight Multi-Locking Mechanism lets you find your perfect position without having to make

30 room/Court Dise adjustments while the adjustable armrest & headrest further work to provide an ultimate ergonomic experience. The solid 7 23100.00 161700.00

High back chair chrome base provides extraordinary support, and the 55mm castors help in an easy smooth movement.. The product shall be

from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate.

Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant &

engineer in charge.

Supplying and placing in posItion of 360 degrees revolving medium back chair as per drawing . Size :- (W)610mm X

(D)660mm X (H)1110mm, back height-590mm, depth- 525mm, max seat height- 545mm, mini seat height- 445mm. The chair

shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat

upholstered with mesh and fabric and cut foam. The novel S curve of the backrest ensures that the natural curve of the spine

is maintained while the adjustable Leaf Lumbar Support with C- Curve provides extra comfort and support to the lower back.

Large Conference Adorned with a ventilated body fabric, it keeps you calm even on the most stressful days. The Self-weight Multi-Locking

31 room Mid back Mechanism lets you find your perfect position without having to make adjustments while the adjustable armrest further 55 21400.00 1177000.00

chair provides an ultimate ergonomic experience. The solid chrome base provides extraordinary support, and the 55mm castors

help in an easy smooth movement. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO

50001:2018, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX

Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image

under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in posItion of 360 degrees fix tablet chair as per drawing Size: 580mm(L)X 760mm(D)X 930mm(H) ,

The chair shall be ergonomically design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back upholstered

with black fabric and cut foam. It will comes in matte finsih in contemporary style. The chair having fixed armrests with half

writing pad. The chair seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

Large Conference cushioning in seat and back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality

32 Room/court room cushioning in back . The chair backrest support foam design based on symmetrical lumbar support seat max height is @ 80 16941.00 1355280.00

visitor chair 930mm . The chair comes up with 4 legs metal powder coated . The product shall be from ISO 9001:2015, ISO 14001:2015,

OHSAS 45001:2018, ISO 50001:2018, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC

Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and placing in position Meeting table.The overall size of the wortop shall be 2400mm x 1150mm x 740mm. Worktop

shall be made from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and having

chamfered edge. Soft closing dual access flap provided for access to power supply and data cables. The Under-structure

consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at

33 Meeting Table bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm CRCA 2 57102.56 114205.12

MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts

on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is

provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard certified.Complete all

as per the direction of Engineer in Charge.

Supplying and placing in position of round meeting table as per drawing. Size 1050mm(Dia)x 750mm(H). Worktop shall be

made from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and having

chamfered edge. Soft closing dual access flap provided for access to power supply and data cables. The Under-structure

consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at

34 Discussion Table bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm CRCA 4 42000.00 168000.00

MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts

on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is

provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard certified.Complete all

as per the direction of Engineer in Charge.

Supplying and placing in position of 4 seater dining set as per photograph . Table Size- (W)900mm X (D)900mm X

(H)750mm, Chair Size- (W)550mm X (D)360mm X (H)705mm, Seat height- 450mm. The mesmerizing glossy black and

purple tabletop and matching leatherette chair accentuate the monochrome look. The table top shall be made of glass top

with dual tone tempered glass. The table tp supported with sturdy metal frame legs. The chairs shall be upholstered with

Dinning Table with premium leatherette. The table alcoves for storeway chairs. total height of chair is 705mm and back height of chair is 250mm.

4 chairs The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian

Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO

21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the

guidance and aprroval of project architect/consultant & engineer in charge.

Supplying & Placing in position of cantiliver chair as per drawing. Size- (W)600mm X (D)630mm X (H)1030mm, back height-

500mm, seat height- 470mm, seat width- 500mm . The chair shall be ergonomically design contour lumbar back design made

of 12mm thick BWR plywood (IS Grade - 303 for seat upholstered with mesh and fabric and cut foam. The Novel S Curve Of

The Backrest Ensures That The Natural Curve Of The Spine Is Maintained While The Adjustable Leaf Lumbar Support With

Meeting Room C-Curve Provides Extra Comfort And Support To The Lower Back. Adorned With A Ventilated Body Fabric, It Keeps You

36 Calm Even On The Most Stressful Days. The Strong Armrests Along With The Chrome Cantilever Base Provide 2 16000.00 32000.00

High back chair

Extraordinary Support For Easy Seating. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018,

ISO 50001:2018, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX

Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image

under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of fix cantilever chair as per drawing. Size :- (W)580mm X (D)580mm X (H)950mm. Max

seat height- 470mm, back height- 490mm, seat width- 500mm. The breathable mesh back chair with cushioned fabric seat

shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with

PU padding and any position locking arrangements.. The seat cushion to be upholstered water proof plywood and cut foam.

Meeting The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and

37 room/discussion mesh fabric. The chair having strong chrome cantilever base for exceptional support. The product shall be from ISO 36 14500.00 522000.00

Mid back chair 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate.

Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant &

engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and placing in position Multipurpose table of the following specifications. Table size shall be 1665 Width mmx900

Depth mmx740 Height mm. The top shall be 25mm thick PLB with 2mm thick PVC Edge Beading plus the Understructure

38 Library Table shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube 2 17287.00 34574.00

.Complete all as per the direction of Engineer in Charge.

Supplying and placing in position of fix cantilever chair as per drawing. Size :- (W)580mm X (D)580mm X (H)950mm. Max

seat height- 470mm, back height- 490mm, seat width- 500mm. The breathable mesh back chair with cushioned fabric seat

shall be ergonomically design with adjustable lumbar back support . The chair shall be visioned with adjustable armrest with

PU padding and any position locking arrangements.. The seat cushion to be upholstered water proof plywood and cut foam.

The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and

39 Library chair mesh fabric. The chair having strong chrome cantilever base for exceptional support. The product shall be from ISO 8 14500.00 116000.00

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate.

Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant &

engineer in charge.

Providing & placing in position of Single Sided Wood & Steel Book Rack .Side panels, Frame & Cross L bracket are made

using 0.8 mm CRCA (IS:513). The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed

in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA

IS:513 Grade. wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges

shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Under structure is made of

0.8m CRCA (IS:513).Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). Shelf panels are placed on shelf

Single sided support and then fixed using nut and bolts from below. Standard config. consists of 6 loading levels formed by 5 no of

40 wooden & steel adjusted shelf for each main and add on unit. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. 0.00

book rack Completely Knock down construction.All MS sheetmetal and metal frame components are powder coated with epoxy

polyester powder to the min thickness of min 45 microns.At the rear side of the shelves back stiffeners are provided. These

act as separators made of 0.8mm THK CRCA (IS:513).Label Holder: It is an aluminum extrusion of length 296mm for single

body bookrack ,fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The

length of paper is 296mm for single body bookrack.Company is ISO-9001:2015,ISO-14001:2015,ISO-

45001:2018,Greenguard(UL), BIFMA and AIOTA certifiedComplete all as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and placing in position storage Optimizer. The Construction: Rigid Knock Down construction made of 0.8 thk.

CRCA Steel conforming to IS: 513 Gr.D. Each body block consists of 1 Main unit & then Add-on units (0, 1,2,3 depending on

no. of bays 1, 2, 3, 4 respectively). Each unit has 6 loading levels with 5 nos. adjustable shelves for 2361 Height body. Front

Cover, Back cover, is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. The front cover has a pattern of holes on the

front surface for ventilation purpose. Back panels when the entire optimizer layout is locked it also prevents access to inside

files from the outside in case of single body. Shared Panel, door frame is made of 0.8 thk. CRCA Steel conforming to IS: 513

Gr.D. Door Frame: The door frame assembly is made of 2 vertical door stiffeners, a top horizontal stiffener and a bottom

horizontal stiffener. Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel

system). The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. It

involves an 8-step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, cold water rinse, phosphating,

cold water rinse, and passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of

approved color & shade with a Dry Film Thickness of minimum 40 microns. Shelf is made of 0.7 thk CRCA steel conforming

to IS: 513 Gr.D or DD. Its max load bearing capacity is 100 Kg uniformly distributed per shelf. In case of Push Pull

43 Optimizer Understructure:- The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. The 96 45241.20 4343155.20

frame consists of the following parts: Main channel, body-fixing channel, body-fixing angle and bearing-fixing angle. All the

components are made of CRCA sheet 2 mm thk conforming to IS:513. In case of Drive Type Understructure:- The

Understructure is a welded frame suitably fabricated to bear the loads based on configuration. The frame consists of the

following parts: Main channel, body-fixing channel, U-channel and Z-channel. All the components are made of HR sheet 3

mm thk. conforming to IS:2062. The hand wheel comprises of a welded metal frame which is then covered by PU using

insert-molding process. The metal frame is made of 3 mm thk. HR conforming to IS:2062. The handwheel is connected to the

rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. Rail Channels (for Push-pull and Drive type

with no platform): It consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both connected by

screws. Prior to the grouting of the guide channels with the help of raul plug & screw, ensure the ground is level. The size of

one body shall be 1200mm x 400mm x 2361mm. The product must be UL Greenguard, Indoor Advantage Gold, Griha and

Svagriha and GreenPro certified.

Supplying and placing in position of sliding tile base modular Workstation as per drawing. Free standing partition height

1200mm and should be minimum of 65-67mm thick front and Return passage side . Partition inner frame is 1.2mm thick mild

steel. Horizontal and vertical trims are made out of extruded aluminum of 1.2mm thick. All Panels/trims shall be powder

coated with 50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition. The frame work shall be

fitted with 8mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/

white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric

data cables at desired 1 levels at skirting. The complete partitioning work shall be carried out as per the approved drawing.

Size - 1500mm W1 x 1500mm W2 x 600D x 750H. Tabletop for workstation made up of 25mm thick pre laminated Particle

board of approved shade. The worktop shall be supported on 18mm thick prelaminated particle board side panel. Pedestals

with legs- pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr

= 2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge.

The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green

Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA

Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of

project architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying and placing in position of sliding tile base modular Workstation as per drawing. Free standing partition height

1200mm and should be minimum of 65-67mm thick front and Return spain . Partition inner frame is 1.2mm thick mild steel.

Horizontal and vertical trims are made out of extruded aluminum of 1.2mm thick. All Panels/trims shall be powder coated with

50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition. The frame work shall be fitted with

8mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white

marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data

cables at desired 1 levels at skirting. The complete partitioning work shall be carried out as per the approved drawing. Size-

45 WORKSTATION 1500mm x 600mm x 750H. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. 32 68408.00 2189056.00

The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Pedestals with

legs- pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr =

2box+1file. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA,

Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO

21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the

guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of sliding tile base modular Workstation as per drawing. Free standing partition height

1200mm and should be minimum of 65-67mm thick front and Return spain . Partition inner frame is 1.2mm thick mild steel.

Horizontal and vertical trims are made out of extruded aluminum of 1.2mm thick. All Panels/trims shall be powder coated with

50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition. The frame work shall be fitted with

8mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white

marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data

cables at desired 1 levels at skirting. The complete partitioning work shall be carried out as per the approved drawing. Size-

46 WORKSTATION 1200mm x 600mm x 750H. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. 18 63598.00 1144764.00

The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Pedestals with

legs- pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr =

2box+1file. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA,

Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO

21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification mentioned above & image under the

guidance and aprroval of project architect/consultant & engineer in charge.

Supplying & placing in position of medium back chair as per drawing. Size:- L (W)640mm X (D)670mm X (H)1100mm, back

height- 570mm, max height-540mm, mini height- 440, seat depth-500mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat upholstered with mesh and fabric and cut

foam. Boasting of high-density moulded foam seat and breathable mesh backrest, it offers conforming comfort. The

adjustable armrest and adjustable lumbar support work to improve posture. The chair comes up with height-adjustable seat

47 Workstation Chair as well as a Self-weight Multi- Locking Mechanism. A 5-star chrome base ensures stability for years while the 55mm smooth 180 14500.00 2610000.00

castors provide ease of movement. Revolving::Pneumatic Height Lift:::Self Weight multilocking. The product shall be from

ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC),

AIOTA, GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark

Certificate. Complete as per specification mentioned above & image under the guidance and aprroval of project

architect/consultant & engineer in charge.

Supplying & Placing in position of 3 str sofa as per drawing. Size- (W)2020mm x (D)905mm x (H)850mm. Seat Depth-

520mm, Seat height-495mm, Arm rest height- 610mm, Back Height- 395mm. A premium offering, this sofa is constructed with

a combination of solid wood and ply along with zig zag springs to give a sturdy and durable stance. Top grain Italian Leather

upholstery is neatly stitched onto the cushions for a supple feel that grows on you. The cushioning is molded such that it flows

Secretary along the partition for a clean unified look. Seat of Sofa is layered with silicon fiber filling over high density foam. The seat

/Member 3 str sofa cushion is made of multi layered foam of density 40D. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS

45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC

Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Supplying & Placing in position of 2 str sofa as per drawing. Size- (W)1605mm X (D)905mm X (H)850mm. Seat Depth-

520mm, Seat height-495mm, Arm rest height- 610mm, Back Height- 395mm. A premium offering, this sofa is constructed with

a combination of solid wood and ply along with zig zag springs to give a sturdy and durable stance. Top grain Italian Leather

upholstery is neatly stitched onto the cushions for a supple feel that grows on you. The cushioning is molded such that it flows

Secretary along the partition for a clean unified look. Seat of Sofa is layered with silicon fiber filling over high density foam. The seat

/Member 2 str sofa cushion is made of multi layered foam of density 40D. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS

45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC

Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying & Placing in position of 1 str sofa as per drawing. Size- (W)1020mm X (D)905mm X (H)850mm. Seat Depth-

520mm, Seat height-495mm, Arm rest height- 610mm, Back Height- 395mm. A premium offering, this sofa is constructed with

a combination of solid wood and ply along with zig zag springs to give a sturdy and durable stance. Top grain Italian Leather

upholstery is neatly stitched onto the cushions for a supple feel that grows on you. The cushioning is molded such that it flows

Secretary along the partition for a clean unified look. Seat of Sofa is layered with silicon fiber filling over high density foam. The seat

/Member1 str sofa cushion is made of multi layered foam of density 40D. The product shall be from ISO 9001:2015, ISO 14001:2015, OHSAS

45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA, GREEN GUARD Compliance, FSC

Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate. Complete as per specification

mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge.

Supplying and placing in position of 3 str sofa as per drawing. Size:- (L)1940mm X (D)880mm X (H)950mm. With its slender

curves and impeccable construction, the Blos is everything that you would need from a sofa. The solid wood frame gives it

colossal strength while kiln- drying the solid wood, makes it wrap and scratch resistant. Its compact size and premium

leatherette upholstery make it a perfect addition for Indian homes. The leatherette upholstery is easy to clean while being

Chief/ Jt Chief 3 stain and fade resistant and anti-peel, letting you enjoy everyday life without worries. Its plush cushions, molded PVC legs,

51 and enticing black finish provide premium comfort while adding a touch of style to your home. The product shall be from ISO 4 79600.00 318400.00

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate.

Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant &

engineer in charge.

Supplying and placing in position of 2 str sofa as per drawing. Size:- (W)1450mm X (D)880mm X (H)950mm. With its slender

curves and impeccable construction, the Blos is everything that you would need from a sofa. The solid wood frame gives it

colossal strength while kiln- drying the solid wood, makes it wrap and scratch resistant. Its compact size and premium

leatherette upholstery make it a perfect addition for Indian homes. The leatherette upholstery is easy to clean while being

Chief/ Jt Chief 2 stain and fade resistant and anti-peel, letting you enjoy everyday life without worries. Its plush cushions, molded PVC legs,

52 and enticing black finish provide premium comfort while adding a touch of style to your home. The product shall be from ISO 10 62800.00 628000.00

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate.

Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant &

engineer in charge.

Supplying and placing in position of 1 str sofa as per drawing. Size:- (W)965mm X (D)880mm X (H)950mm. With its slender

curves and impeccable construction, the Blos is everything that you would need from a sofa. The solid wood frame gives it

colossal strength while kiln- drying the solid wood, makes it wrap and scratch resistant. Its compact size and premium

leatherette upholstery make it a perfect addition for Indian homes. The leatherette upholstery is easy to clean while being

Chief/ Jt Chief 1 stain and fade resistant and anti-peel, letting you enjoy everyday life without worries. Its plush cushions, molded PVC legs,

53 and enticing black finish provide premium comfort while adding a touch of style to your home. The product shall be from ISO 14 44400.00 621600.00

9001:2015, ISO 14001:2015, OHSAS 45001:2018, ISO 50001:2018, BIFMA, Indian Green Building Council (IGBC), AIOTA,

GREEN GUARD Compliance, FSC Certificate, SEDEX Certificate, ISO 21015:2007, SEFA Certificate, I Mark Certificate.

Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant &

engineer in charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Secretary JS/ Providing and placing in position Centre table.The Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued

Member/ Chief/ with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

Joint chief/ dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1

54 Lounge/ cm.Complete all as per the direction of Engineer in Charge. 19 16449.20 312534.80

Reception/ Lobby/

Secretary Providing and placing in position Corner table. The Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued

JS/Member/Chief/J with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

oint dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1

chief/Lounge/Rece cm.Complete all as per the direction of Engineer in Charge.

ption/Lobby/Waitin

Providing and placing in position hinged door unit (HDU) of size 1200mm (H) X 900mm (W) x 460mm(D). The top is 11mm

thick bent metal made out of 0.8mm CRCA steel sheet (as per IS:513) powder coated with DFT 40-60 microns of epoxy

polyester powder. The body and side panel are made of 25mm thick and 18mm thick PLT board respectively with metal

cladding of 0.8mm CRCA steel sheet (as per IS:513) from the outside powder coated with DFT 40-60 microns of epoxy

polyester powder. 1 No Adjustable and 1 No Fixed Shelf made of 25mm thick PLT is provided with a UDL capacity of 40kg

56 Storage maximum. The doors are made of 18mm thick PLT with a 3-way nickel plated wooden furniture lock and aesthetically 75 28845.10 2163382.50

appealing recessed aluminum extrusion handles. Screw adjustable levellers with plastic base are provided at the bottom for

vertical ht. adjustment for floor levelling of units. Company Certification: Company is ISO-9001:2015,ISO-14001:2015,ISO-

45001:2018,Greenguard(UL), BIFMA and AIOTA certified. Product Certificates: GreenPro, SCS Global IAQ - Gold.complete

all as per the direction of Engineer-in-charge.Complete all as per the direction of Engineer in Charge.

Providing and placing in position Courrt Room table.The overall size of the worktop shall be as per drawing (complete set of

tables). Worktop shall be made from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to

top and having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables. The

Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade

conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP

57 Court Room Table profile is added at bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made 1 596563.00 596563.00

of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power

box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout

with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard

certified.Complete all as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 21:17:13 IST

Schedule of Quantities: Signages

S No Description Unit Qty Unit price Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches

of required size and shape with arrangement of screws in the letters

itself for mounting on the walls or pasting using 3M VHP Tape. Fixing

complete as per directions of the engineer. The Sizes would be Each 1 35,977.00 35977.00

calculated in Sqft as per Logo Design provided.

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper names/ Departments written using plottercut vinyl or

laser cut acrylic letters in approved colour.Inserting provision for Each 100 1,967.00 196700.00

changing names .Fixing provision using 3M VHP double sided tape as

Signage Size 12x5 inch

3 DEPARTMENTAL SIGNAGE (All Floors)

Providing and fixing of Acrylic signage made of 5mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper names /Departments written using plottercut vinyl or

laser cut acrylic letters in approved colour. Fixing provision using 3M Each 30 1,345.00 40350.00

VHP double sided tape as required.

Signage Size 12x5 inch

4 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper names /Departments written using plottercut vinyl or

laser cut acrylic letters in approved colour. Provision of fixing screws/ Each 6 18,833.00 112998.00

Studs etc or as per the direction of the engineer.

5 TOILET ICONS

Digitally signed by AMIT

SINGH 21:17:13 IST

Providing and fixing of Acrylic signage made of 5mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper icons using plottercut vinyl or laser cut acrylic letter in

approved colour. Fixing provision using 3M VHP double sided tape as Each 27 1,089.00 29403.00

Signage Size :8 "x 8" inch

6 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm

acrylic with Evacuation Plan Printed on photoluminescent media and

inserted between the two frames. Should be fixed on the wall using 4 Each 6 2,673.00 16038.00

Screw/ SS studs. Size 12 inch x 17 inch

7 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made

from acrylic sheet of 8 mm thickness laser engraved, Transformer to

be inbuilt. Maintenance - free sealed nickel cadmium battery included •

120V/277V AC Operation • Crystal clear acrylic face panel• Engraved

letters increase visibility • Anodized aluminum faceplate • Field applied Each 6 3,289.00 19734.00

chevron directional indicators simplify installation • Long life, energy-

saving LED lamps • Dual-voltage 120V/277V AC Operation • UL listed.

To be installed at stairs entry. Size 310mm x 175mm

8 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun

board sheet at base with photoluminescent film self adhesive & colored

vinyl ( Red/Green) Plotter cut and pasted on top. Both side / Single Side

facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical

specifications and directions of Engineer.

a Photoluminescent, Fire Hose Reel - 10"x8" Each 6 500.00 3000.00

b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 6 577.00 3462.00

c Photoluminescent, Floor Level - 18"x6" Each 6 577.00 3462.00

d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 6 500.00 3000.00

e Photoluminescent, Fire do not use lift- 10"x8" Each 6 500.00 3000.00

f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 12 500.00 6000.00

TOTAL 473124.00

Digitally signed by AMIT

SINGH 21:17:13 IST

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Total Qty Unit Rate Total Price

1 Rectangular FRP Planter(LP7A-30"X10"X12") 29 Pcs. 2,850.00 82,650.00

2 Rectangular FRP Planter(LP7A-24"X8"X10") 50 Pcs. 1,900.00 95,000.00

3 Rectangular FRP Planter(LP7A-24"X10"X12") 25 Pcs. 2,220.00 55,500.00

Digitally signed by AMIT

SINGH 21:17:13 IST

4 Round FRP Planter(LP9A-20"X20"X30") 40 Pcs. 3,000.00 120,000.00

5 Round FRP Planter (LP9B-18"X18"X24") 32 Pcs. 2,860.00 91,520.00

Plantation: Supply and installaion of Natural Plant with sand, fertilizer etc. The

plant shall be decided later on by engineer in charge/client in writing specifying

size and name of plant.same may be considered while quoting.

10.2 Plantataion / Labour / Loading unloading 25,000.00

NET TOTAL 694,670.00

Digitally signed by AMIT

SINGH 21:17:13 IST