REPLACEMENT OF OLD CONVENTIONAL LIGHT FITTING WITH LED FITTING AT TECH AREA AT AF STN CHAKERI KANPUR

Amount

Taking down old unserviceable/deteriorated batten/MS conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash complete all as specified and directed.

Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories complete all as specified and directed.

M & L for concealed point wiring on wall and surface wiring on ceiling/roof/trusses with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled rigid steel conduit (metallic) not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.0 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators with brass screw and cup washers including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed. Make or wire: polycab/finolex/grandley or equivalent. Make of conduit: Plaza/Kalinga/finolex. For one light, fan, call bell point controlled by one switch

All as per item No. 3 but 5Amp independent socket point controlled by one switch.

All as per iten No 3 for one socket point controlled by one switch on same board

All as per item No 3 here-in-before but for power point wiring with 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead .

M & L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators with brass screw and cup washers including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed. Make or wire: polycab/finolex/grandley or equivalent. Make of conduit: Plaza/Kalinga/finolex For one light, fan, call bell controlled by one switch.

All as per item No. 7 but 5Amp independent socket point controlled by one switch.

All as per item No.7 but For one socket point controlled by one switch on same board

All as per item No 7 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L, in replacement, for switch flush type single pole one way 5 Amps, 240 volts, white finish ISI Marked complete all as specified and directed. Make : Leader /Anchor/Havells/cona

M & L, in replacement, for switch flush type 15 Amps, 240 Volts single pole white finish complete ISI Marked complete all as specified and directed. Make : Leader /Anchor/Havells/Cona

M&L, in replacement, for socket outlet 5 pin, 5 Amps flush type white finish complete conforming/ ISI Marked complete all as specified and directed. Make : Leader /Anchor/Havells/Cona

S&F, in replacement, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete conforming/ ISI Markedcomplete all as specified and directed. Make : Leader /Anchor/Havells/Cona

S&F, in replacement, electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete conforming/ ISI Marked acomplete all as specified and directed. Make : Leader /Anchor/Havells/Cona

S&F, in replacement, ceiling rose, surface backlite, 65 x 20 mm three terminal conforming/ ISI Marked complete all as specified and directed. Make : Leader /Anchor/Havells/Cona

S&F, in replacement, lamp holder insulated body with back plate suitable for angle / batten fitting conforming/ ISI Marked complete all as specified and directed. Make : Leader /Anchor/Havells/Cona

S&F sheet metal enclosure TPNL MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 for DB when MCBs & MCCB 125 Amps (as incomer) to be used, fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed. Make - Legrand/Indoasian/L&T

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPNL, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB/ 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed. Make - Legrand/Indoasian/L&T

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. Make - Legrand/Indoasian/L&T

All as per item No 20 but 4ways & - do -

All as per item No 20 but 2ways without busbar & - do -

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

All as per item No 23 but SP 40-63 Amps -do-

All as per item No 23 but SPN 16-32 Amps -do-

All as per item No 23 but SPN 40-63 Amps -do-

All as per item No 23 but TP 40-63 A 415V -do-

All as per item No 23 but TPN 40-63 Amps, -do-

S&F MCCB 125 Amps, 4 Pole, 415V, 25KA complete all as specified and directed. Make - Legrand/Indoasian/L&T

S&F sheet metal enclosure , 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly on in concealed position complete all as specified and directed. Make - Legrand/Indoasian/L&T

S&F sheet metal enclosure , 32A, 415 Volts triple pole neutral & earth with a three/five pin and earth plug and socket complete in metal clad board (Industrial type) with one TP MCB 32 Amp fixed properly on / in concealed position complete all as specified and directed. Make - Legrand/Indoasian/L&T

S&F sheet metal enclosure , 63A, 415 Volts triple pole neutral & earth with a three pin and earth plug and socket complete in metal clad board (Industrial type) with one TPN MCB 63 Amp fixed properly on / in concealed position complete all as specified and directed. Make - Legrand/Indoasian/L&T

M&L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete EXCLUDING rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Havells/polycab/Finolex /Grandley or equivalent. Note : M S Conduit/ PVC Conduit and cutting cheaseling and making good will be measured and paid separately

M&L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete EXCLUDING rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Note : M S Conduit/ PVC Conduit and cutting cheaseling and making good will be measured and paid separately Make - Havells/polycab/Finolex /Grandley or equivalent.

M&L sub main wiring with four single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in MS/PVC conduit with 2 run of 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 25 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Note : M S Conduit/ PVC Conduit and cutting cheaseling and making good will be measured and paid separately. Make - Havells/polycab/Finolex /Grandley or equivalent.

M&L sub main wiring with four single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 10 sqmm drawn in MS/PVC conduit with 2 run of 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete EXCLUDING rigid stove enameled steel conduit ISI marked of size not less than 32 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Make of wire: Havells/polycab/Finolex /Grandley or equivalent. Note : M S Conduit/ PVC Conduit and cutting cheaseling and making good will be measured and paid separately

S&F rigid metallic medium 20mm dia stove enameled steel conduit ISI marked in concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position complete all as specified and directed.

All as per item No. 37 above but metallic medium 25 mm dia stove enameled steel conduit ISI marked -do-

All as per item No. 37 above but metallic medium 32 mm dia stove enameled steel conduit ISI marked -do-

Cutting chases in brick walls, pinning in at the depth of 30 mm, making good to facings where required and pointing in cement mortar 1:3 cutting chases for concealed conduit wiring,submain wiring etc and making good and palstering the surface with cement or plaster of peris and matching with same colour scheme, cutting exceeding 10cm but not exceeding 30cm girth complete all as specified and directed.

M&L in replacement complete for recess mounting LED Panel 600x600 mm fittings made of CRCA powder quated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 37 -40 watt complete electronic drivers with all internal electric connections complete all as specified and directed. Make :Philips Cat No. RC 380 B LED 34 S-6500 G3 PSD OD or equivalent in wipro/Bajaj

M&L inreplacement for energy saver LED light fitting 39 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 39 Watt ,Lumen OUTPUT NOT LESS THEN 115 lM /WATT with 50000 burning Hours, PF = 0.95 complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting all as directed in replacement of lamp holder complete all as specified and directed. Make-PHILIPS BN208C LED 40/CDL L1200 FR or equivalent in wipro/Bajaj

M&L ,in replacement, for LED 4 FT Batten with a nominal system lumen output of 4000 lumens and a minimum syestem efficiency of 105 Lm/w, system lifetime of luminaries 40,000 burning Hours at L70, Colour temparature of 6500 K and CRI not less then 80 IP -20 Protection CRCA WITH a glossy diffuser power factor 0.95. Total power comsumption should not exceed 38 watt (including driver) complete with hanging arrangements complete all as specified and directed. Make : Philips model no. Enduraled batten " BN108C LED 40 40S PSU CDL WH or equivalent in wipro/bajaj

M&L for surface Mounted LED light having20 Watt out put 1000 lumunes with burning temp 6500K with electronic driver end cover connector box and all connected accessoriesall as directed at site complete all as specified and directed. Make: Philips Make SMC 2 5IC LED 20 S6500PSUWN or equivalent in wipro /bajaj

Supply and fixing LED Highbay light fitting 150 watt with high Pressure Die cast Alumenium (LM6) ALLOY HOUSING smd led High Bay luminaries of 70 watt 7200 system lumen, product with company logo engraved system wattage 70 wattmax symmetry beam, (for high ceiling heights) also having beam angle 110/120 degree, PMMA, materials penutes lenses for effective light distribution, luminous flux (LUmenL70(Hours)ambient temparature 45 degree, optics wide beam optics optical glass cover glass alumenioum PDC housing IP 65 ik-09 cLASS -1 POWER FACTOR 0.95, DRIVER EFFICIENCY 90% including fixing arrangement complete all as specified and directed. Make: Philips Cat No: BY 415 P LED 1455 CW WB FG PSU GR OR equivalent in Wipro/C&S

M&L in replacement for LED Building Security Light 110 watt orf alumenium PDC housing glass cover with IP 66 protectioncomplete all as specified and directed. Make: Philips cat no. brp 410 LED 110 CW HE MR FG S2 PSU GR or equivalent in Wipro/C&S

Supply and fixing in replacement energy saving envionmental friendly long life LED 120 Watt ,5700 K,exclusive innovative die cast alumenium IP-65 fllod light with high power LEDs as light source,suitable for highlighting archtecture façade gighmast and general purpose lighting complete all as specified and directed. Make: philips BVP 192 LED 110 CW HO NB FG GR PSU or equivalent in wipro/Bajaj

Supply and fix in replacement complete for racess mounting LED panel fitting with and including mounting accessories made of CRCA powder coated finish with fully coveredby PMMAacrylic lumio diffuser LED used shall be 5 MD type and fixture should have minimum efficiency at system level (not chip level) 100lm/watt, life of fixture 50000 burning hours @ L 70% Lumen maintanance CCT upto 6500K Lumen not less than 3200 Lumens CRI 80 and above Pf>0.90 and operating voltage 140 volt to 270 volt internal surge protection 2.5KV as per IS-10322 and IEC 60598 system maximum wattage 38 with electronin drivers and all internal electric connections complete all as specified and directed. Make philips Cat Part No RC 380B LED 32 S-6500L120W30 PSU OD

A.B.Enterprises

M/s Sohanil Construction

MD BUILDER